What requires iSCSI initiator configuration in the guest OS to use Volumes?

Microsoft Windows Failover Cluster

SQL Server Always On Availability Group

Microsoft Windows Failover Cluster

An administrator adds a node with older generation processors to an existing AHV cluster with newer generation processors. What is the effect on live migration?

Live migration of VMs is prevented between newer and older processors.

Live migration continues to function as expected and VMs can move to any AHV host.

Live migration is prevented until the administrator enables the legacy migration option.

Live migration is prevented until the administrator manually changes the newer processor level.

Live migration of VMs is prevented between newer and older processors.

An administrator needs to bring down a host in a Nutanix Cluster for maintenance reasons. The administrator puts the host in maintenance mode.What should the administrator do to perform an orderly shutdown of the CVM?

Execute the cvm_shutdown -P new command from the CVM.

Enter Fever off Server - immediate from the IPMI console.

Enter Fewer off Server-orderly Shutdown from the IPMI console.

Execute the cvm_shutdown -P now command from the host.

Administrator is creating a Windows 10 VM that will be used for a virtual desktop template. After creating the VM and booting to the ISO, the administrator is unable to install Windows and receives the following error. What steps does the administrator need to take to install the OS?

Load the Virtual SCSI pass-through controller.

Load the Nutanix VirtIO Serial Bus Driver.

Load the VirtIO Network Ethernet Adaper.

Load the Nutanix Virtual Balloon Driver.

Load the Virtual SCSI pass-through controller.

Refer to Exhibit: After configuring modules for a Remote Syslog Server, the settings are as shown. The administrator notices that even though the level parameter is set to EMERGENCY, that all monitor logs are being sent.What is the likely cause of this issue?

A Log Level of EMERGENCY includes all monitor logs.

A second rsyslog server is configured to send all monitor logs.

Having the Module Name set to STARGATE sends all monitor logs regardless of the level.

A Log Level of EMERGENCY includes all monitor logs.

The true setting for Include Monitor Logs sends all monitor logs regardless of the level.

While installing Windows 2019 on a new VM on an AHV cluster, an administrator notices there aren't any drives listed for the install.What might the problem be?

VirtIO drivers have not yet been installed and the disks are SCSI disks.

VirtIO drivers have not yet been installed and the disks are IDE disks.

VirtIO drivers have not yet been installed and the disks are SCSI disks.

VirtIO drivers must be installed on AHV for installations of Windows.

VirtIO drivers aren't supported on this version of Windows 2019.

Which baseline is used to identify a Zombie VM?

VM is powered off for the past 21 days. B. Memory usage is less than 1% and memory swap rate is equal to 0 Kbps for the past 21 days. VM has no logins for the past 21 days

VM has no logins for the past 21 days

Fewer than 30 1/Os and less than 1000 bytes per day of network traffic for the past 21 days

An administrator manages a cluster and notices several failed components shown in the exhibit. What two options does the administrator have to run all NCC checks manually? (Choose two.)

Using the Actions drop-down menu in the Health dashboard of Prism Element.

Running ncc health_checks run-alll on the CVM

Using the Actions drop-down menu in the Health dashboard of Prism Element.

Running ncc health_checks run-alll on the CVM

Using the action action drop-down menu in the Health dashboard of Prism Central

Running noc health_checks run_all on the PC VM

A newly-hired Nutanix administrator was tasked by the CIO to create a single VM on a test network. The network administrator stated that a native VLAN was used on the Cisco TOR switches with the following parameters:IP address:172,16.1.2Network Mask: 255.255.255.0Default gateway: 172.16.1.1VLAN:1The same parameters were used to create a network profile on Nutanix, but the when the VM was on ...What should the Nutanix administrator do to fix this issue?

Change VLAN field from vlan. 1 to vlan.0.

Nutanix removed support for native VLAN.

Change VLAN field from vlan. 1 to vlan.0.

Use DHCP as opposed to static IP

An administrator needs to provide access for a user to view real-time performance metric for all VMs on all clusters across the datacenter.Which method accomplishes this with the least effort and ongoing maintenance?

Configure AD authentication create a custom role, assign the user to the role, and apply the role to all clusters and VMs

Configure IDP authentication and assign the user to the Cluster Admin role in Prism Central.

Configure AD authentication and assign the user to the Viewer role in Prism Element.

Configure AD authentication create a custom role, assign the user to the role, and apply the role to all clusters and VMs

Upon logging into Prism Central, an administrator notices high cluster latency.How can the administrator analyze data with the least number of steps or actions?

Click on the chart in the widget to expand the data elements.

Modify Data Density in the main Prism Central dashboard.

Click on the chart in the widget to expand the data elements.

Take note of the duster name and create a new Analysis chart.

Click the cluster name in the cluster quick access widget.

An administrator would like to leverage the Reliable Event Logging Protocol (RELP) with their Remote Syslog Server. After completing the configuration, it is observed that RELP logging is not working as expected.What is the likely cause of this issue?

The remote server does not have rsyslog-relp installed.

The cluster does not have RELP installed.

The GENESIS was the only one chosen to forward log information.

The Remote Syslog Server was configure using TCP as the protocol.

The remote server does not have rsyslog-relp installed.

When a VM is connected to a Nutanix managed network, when is the IP addressed assigned?

When the vNIC is created on the VM.

When the guest OS sends a DHCP request.

When the guest OS receives a DHCP acknowledge.

Which two capabilities does IPAM provide in a Nutanix networking configuration? (Choose two.)

Allows AHV to assign IP addresses automatically to VMs using DHCP

Configures a VLAN with an IP subnet and assigns a group of IP addresses

Allows proxy server settings to be set up for a defined network

Allows AHV to assign IP addresses automatically to VMs using DHCP

Configures a VLAN with an IP subnet and assigns a group of IP addresses

Configures firewall rules to prevent or allow certain TCP/IP traffic

An administrator has been alerted to a VM that has high I/O latency and wants to determine if there are any other factors, such as insufficient network or memory resources that correlate, as part of a troubleshooting process.Which type of chart should the administrator create to allow all relevant data to be easily exported to CSV for later analysis?

A VM metric chart for each of the relevant metrics

A VM entity chart with each of the relevant metrics.

A cluster metric chart for each of the relevant metrics

A cluster entity chart with each of the relevant metrics

A VM metric chart for each of the relevant metrics

How should an administrator correct an SSL error when connecting to a Nutanix cluster?

Create a new SSL certificate for the cluster signed by an AD certificate authority

Add the SSL certificate to the workstation's trusted people store

Create a new self-signed certificate for the cluster with a 4096 bit key

Create a new SSL certificate for the cluster signed by an AD certificate authority

Add the SSL certificate to an AD group policy applied to all computer objects

A node with Erasure Coding fails.What is the impact?

Potentially increased amount of data stored in the SSD tier.

The node stops utilizing Erasure Coding.

Potentially increased amount of data stored in the SSD tier.

Increased Controller VM CPU Load.

AQS unable to do deduplication during the Erasure Coding failure.

A customer wants to isolate a group of VMs within their Nutanix environment for security reasons. The customer creates a VM with two NICs to act as a firewall and installs the appropriate software and certificates.However, no one from the outside can access the application.What is the likely cause of this problem?

One of the NICs needs to be configured on the internal VLAN

A shared volume group must be used by all isolated VMs

More than one NIC cannot be added to a VM

One of the NICs needs to be configured on the internal VLAN

Wireshark is installed on the NAT VM

Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)

Import the .vmdk into the Image Service.

Use shared nothing live migration.

A customer has a 24-node cluster with all containers configured with RF3. Two different nodes have incurred a simultaneous HDD failure.What is the result?

The Nutanix cluster recognizes the failures and immediately begins to rebuild lost data to three replicas.

The cluster runs in a degraded state until the failed drives are replaced and the data has been restored to three replicas.

Sixty minutes after the failures a rebuild of the lost data can remaining HDDs begins to restore to three replicas.

The VMs with data on those drives crash, and an HA event occurs, restarting them on a remaining healthy node.

The Nutanix cluster recognizes the failures and immediately begins to rebuild lost data to three replicas.

An Administrator is working on a one-node ROBO cluster configurationsWhich statement is true for this configuration?

Supported hardware is NX-1175-G5 and G6

Witness vm required to break cluster quoram

Supported hardware is NX-1175-G5 and G6

witness vm should be 8vcp and 20gb ram

the minimum RPO 8 hours required

Which best practice should be followed when creating a bond in a Nutanix cluster?

Place NICs of different speeds within the same bond

Only utilize NICs of the same speed within the same bond

Use the default bond configuration after installation

When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host failure?

Restart on other hosts in the AHV cluster

Restart on a best-effort basis if resources are available

Perform a live migration to other hosts in the AHV cluster

Restart on other hosts in the AHV cluster

Perform a live migration on a best-effort basis if resources are available

An administrator has set up a local web server accessible to the Nutanix clusters.Which two steps are required to set up LCM for an environment without Internet access? (Choose two.)

Edit LCM Advanced Settings in Prism Element and enter the address of the web server.

Download the lcm_dark_site_version. tar . gz LCM bundle from the support portal.

Download the lcai_disconnecced_version. tar.gz LCM bundle from the support portal.

Edit LCM Advanced Settings in Prism Element and enter the address of the web server.

Edit LCM Advanced Settings m Prism Central and enter the address of the web server.

Download the lcm_dark_site_version. tar . gz LCM bundle from the support portal.

A cluster has RF2. The cluster loses two drives on different nodes in the same storage tier.What is the effect on the replicas of the VMs?

No VMs lose data if the node has two or more SSDs

Some VMs may reboot and gain access to data

No VMs lose data because of RF2

Nutanix NCP-MCI-6.5 Practice Test 3 - Free Online Exam Prep & Questions

A customer has a newly-deployed AHV cluster with nodes that have 2.x 10 GBE and 2.x interface. The customer wants to use all available network interfaces to provide connectivity to the VMs.

Which option should the administrator use to achieve this while remaining consistent with Nutanix recommendations?

Become a Premium Member for full access

Unlock Premium Member

Nutanix NCP-MCI-6.5 Practice Test 3

Question

Nutanix NCP-MCI-6.5 Practice Tests

Practice Tests