An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster. Which metrics should the administrator review in Prism Analysis Graphs?

Cluster IO, CPU, Memory, Network, App Server CPU

Cluster IO, Network, Database and App Server CPU

Cluster IO, CPU, Memory and Database and App Server CPU

Cluster IO, CPU, Memory, Network, App Server CPU

A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements. Only three nodes in the cluster meet this requirement.The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.How should the administrator perform this task?

Configure VM-Host affinity for the nodes that meet the application's GPU requirement.

Create a sperate three-node cluster using the nodes that meet the requirement.

Configure VM-Host affinity for the nodes that meet the application's GPU requirement.

Over-Provision the application VM with additional virtual GPUs.

Configure anti-affinity rules between the application VM and the other VMs running on the cluster.

Where should an administrator unregister Prism Element from Prism Central?

From the Prism Central web console

From the Prism Element web console

A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.What occurs to the cluster and these VMs during an AHV upgrade?

One node hosts two VMs while the node being upgraded is in maintenance mode.

One VM out of the four powers down when the node hosting it reboots.

The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy.

The AHV pre-upgrade checks fail until the four VMs are powered off.

What are two minimum prerequisites for live migration to succeed? (Choose two.)

All AHV hosts have IP addresses in the same subnet

All VMs are configured for the same VLAN

All AHV hosts have IP addresses in the same subnet

All AHV hosts must be configured on the same VLAN

All VMs have an IP address in the same subnet

All VMs are configured for the same VLAN

When creating a VM on an AHV cluster, how is the initial placement of the VM determined?

The Acropolis Dynamic Scheduler selects a host which provides adequate resources for the VMs configuration

AHV uses a round robin algorithm, placing new VMs onto hosts based on the numerical order of their UUID

The administrator right clicks on the desired host and selects Power on VM from the dropdown menu

The Acropolis Dynamic Scheduler selects a host which provides adequate resources for the VMs configuration

Placement is determined by the host that holds the new_VM token at the time of VM creation

What is Prism Central primarily used for?

Multi-cluster network configuration

An administrator is configuring data protection and DR for a multi-tier application. All VMs must be protected at the same time.What must the administrator do to meet this requirement?

Create a consistency group for the application and place all VMs in it

Create a consistency group for each VM with identical schedules

Create a consistency group for the application and place all VMs in it

Create a protection domain for the application and select auto-protect related entities

Create a protection domain for each VM with identical schedules

An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit. Which three steps must the administrator take to increase throughput to the host? (Choose three.)

Connect the 10Gb interfaces to the physical switch.

Change the bond mode to balance-slb or balance---tcp.

Remove any 1Gb interfaces still connected from the default bond.

Connect the 10Gb interfaces to the physical switch.

Change the bond mode to balance-slb or balance---tcp.

Remove any 1Gb interfaces still connected from the default bond.

Add a new switch to the network and connect 1Gb interfaces to it.

Change the VLAN ID to a higher priority ID.

AHV IPAM assigns an IP address from the address pool when creating a managed VM NIC.At which two instances does the address release back to the pool? (Choose two)

The IP address is changed to static.

Refer to the exhibit. The Linux Admin role has been created to manage only Linux VMs in the environment. However, the Admin1 user does not have access to all Linux VMs.What step should be taken to grant the proper access?

Add the proper category to each Linux VM.

Add the hosts to the entities KM for the role.

Grant the admin1 user the viewer role (or the cluster.

Add the role to the Linux images.

Add the proper category to each Linux VM.

Refer to Exhibit. An administrator increases the cluster RF to 3. The containers are not modified.What will the new values in the data resiliency dashboard be for FAILURES TOLERABLE for the Zookeeper and Extent Groups components?

Zookeeper = 2 and Extent Groups = 1

Zookeeper = 1 and Extent Groups = 1

Zookeeper = 2 and Extent Groups = 2

Zookeeper = 2 and Extent Groups = 1

Zookeeper = 1 and Extent Groups = 2

Which three configuration scenarios are valid for the deployment of Prism Central? (Choose three.)

Environments use Network Address Translation.

Prism Elements and Prism Central art in different subnets.

Environments do not have Internet access.

Environments use Network Address Translation.

Prism Elements and Prism Central art in different subnets.

Environments do not have Internet access.

Prism Elements and Prism Central have proxy configured.

Environments use the 192.168.5.0/24 CVM management network.

An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container space for each application.How should the administrator meet this requirement?

Create two containers and reserve space for vDisks

Create one container and set capacity reservation

Create two containers and reserve space for containers

Create one container and enable compression

Create two containers and reserve space for vDisks

What is the expected behavior of the VMs residing on that host when a controller VM becomes unavailable?

The host will automatically redirect I/O and VMs will continue running.

A Live Migration will be performed on the affected VMs.

The host will automatically redirect I/O and VMs will continue running.

The impacted host and VMs will automatically shut down.

VM High Availability will restart the impacted VMs on another host

An administrator notices that most of the VMs in the cluster are on one host. Users report that an application seems to respond slowly. The application server VM has significantly more memory assigned to it than other VMs.How should the administrator fix this issue?

Reduce the amount of memory assigned to the VM.

Migrate the VM to a different host.

Increase the memory on the CVM.

An administrator migrates a VM onto a new Nutanix cluster- After the migration, the administrator observes the following conditions:* Cluster memory utilization: 64%* Cluster CPU utilization: 19%* Cluster storage utilization. 32%* Average VM CPU utilization: 25%* Average VM CPU ready%: 24%* Average VM memory utilization: 60%Which two changes should the administrator make to improve VM performance? (Choose two.)

Reduce the number of vCPUs assigned to VMs.

Reduce the number of VMs on the hosts.

Reduce the number of vCPUs assigned to VMs.

Reduce the number of VMs on the hosts.

Replace high core count CPUs with high clock rate CPUs.

An administrator needs to deploy an application with a large amount of data connected via Nutanix volumes.Which two actions should the administrator take when designing the Volume Group? (Choose two.)

Distribute workload across multiple virtual disks

Enable RSS (Receive Side Scaling)

Distribute workload across multiple virtual disks

Enable RSS (Receive Side Scaling)

Use multiple subnets for iSCSI traffic

Enable thick provisioning on the Volume Group(s)

Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic regardless of direction, between two groups of VMs identified by their category.Which policy should be used to meet this requirement?

An Isolation Environment Policy

A system administrator needs to add more VMs to their Nutanix cluster.Which two actions should the administrator perform to determine if the current cluster can accommodate the new VMs? (Choose two)

Utilize Optimize Resources for VM efficiency

Determine utilization with Cluster Runway

Enable Deduplication and Ensure Coding

Utilize Optimize Resources for VM efficiency

Determine utilization with Cluster Runway

Perform an inventory with Life Cycle Management

An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.What are two impacts on the cluster? (Choose two)

Increasing CPU counts will decrease memory utilization

An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.Which two steps should be taken to prepare for this task? (Choose two.)

Shut down all user VMs in the cluster

Stop all Nutanix Files clusters

Reconfigure IPMI for the new datacenter

Shut down all user VMs in the cluster

Relocate the linked LDAP server

Stop all Nutanix Files clusters

An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.What must be changed to enable full inter-VM communications?

Update the switch to specifically allow VLAN 15

Change the spanning-tree port type on the switch.

Change the network the VMs are connected to

Update the switch to specifically allow VLAN 15

The VMs need to have static IP addresses.

An administrator has a Custom backup application that requires a 2TB disk and runs m Windows. Throughput is considerably lower than expected.The application was installed on a VM with the following configuration:* FOU vCPUs with one core/vCPU* 4GB of Memory* One 50GB vDisk for the Windows installation* One 2TB vDisk for the applicationWhat is the recommended configuration change to improve throughput?

Span the 2TB disk across four vDisks

Increase the vCPUs assigned to the VM

Span the 2TB disk across four vDisks

Increase the number of cores per vCPU

An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure eventWhich storage optimizations should the administrator set to meet the requirements?

Compression Deduplication and Erasure Coding

Deduplication and Erasure Coding

Compression Deduplication and Erasure Coding

What is the function of the virbr0 bridge on AHV?

To carry management and storage communication between user VMs and AHV host.

To carry all traffic between the user VMs and the upstream network.

To carry management and storage communication between user VMs and the CVM.

To carry management and storage communication between user VMs and AHV host.

To carry storage communication between the guest VMs and the CVM

Nutanix NCP-MCI-6.5 Practice Test 4 - Free Online Exam Prep & Questions

Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?

Become a Premium Member for full access

Unlock Premium Member

Nutanix NCP-MCI-6.5 Practice Test 4

Question

Nutanix NCP-MCI-6.5 Practice Tests

Practice Tests