An administrator needs to migrate workloads from a Nutanix cluster running VMware ESXi to Nutanix AHV. The migration process needs to be completed in multiple VM groups and support roll back in case any problems are found during user acceptance testing.Which action should the administrator perform?

Use Nutanix one-click cluster conversion from ESXi to AHV

Use Cross Hypervisor DR to replicate VMs from ESXi to AHV

Use Nutanix one-click cluster conversion from ESXi to AHV

An administrator needs to expand a cluster based on AHV and running on Nutanix G5 hardware with a new Nutanix G7 system. The cluster is running AOS 5.10 but the operation fails when expanding the cluster. AOS is running on the new system. There are no issues discovering the node.Why is the operation failing?

AOS version running on G7 is older than the version on the cluster.

Foundation software has not been updated on the cluster.

G7 hardware cannot be added to a G5 cluster.

EVC needs to be configured before cluster expansion

Refer to the exhibit. An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.What must be changed to enable full inter-VM communications?

Update the switch to specifically allow VLAN 15

Change the network the VMs are connected to

Change the spanning-tree port type on the switch

The VMs need to have static IP addresses

Update the switch to specifically allow VLAN 15

An administrator is deploying Nutanix Files 3.5 and needs to configure the sizing of the FSVMs for an increased number of concurrent SMB connections over the default 750.What should the administrator do?

During installation, click Customize on the File Server Installation screen, change the number of connections, and finish the installation

Deploy the Files VMs. power down the three FSVMs. change the CPU and RAM via Prism, and then power the three FSVMs back up

During installation, click Customize on the File Server Installation screen, change the number of connections, and finish the installation

Complete the default installation change the CPU and RAM m Prism, and then log into the File Server dashboard and change the Filer Server Properties

During installation, input the correct number of connections in the File Server Installation screen and complete the installation

An administrator receives a notification that storage in a Nutanix cluster is unavailable. The cluster consists of five nodes and is configured with a Fault-Tolerance level of 1 (FT-1).Upon investigation, the administrator finds the following:* All AHV hosts are powered on and the CVMs are running* Nodes A, B, and C are connected to one top of rack switch* Nodes D and E are connected to a second top of rack switch* The cluster status command run on Node A shows that CVM services on nodes D and E are downWhich issue is causing the storage outage?

The switch connecting Nodes D and E is down.

The default gateway for the CVMs and AHV hosts is down.

The switch connecting Nodes D and E is down.

The genesis process is down on both Nodes D and E.

Nodes D and E are in maintenance mode.

Refer to the exhibit. An administrator notices a critical alert on the Metro Availability Protection Domain What is causing this alert?

Metro Availability Protection domain is active on the remote site.

VMware Site Recovery Manager is handling a failover event

Metro Availability did not fail over and caused an outage.

vSphere moved VMs to the remote container, and the VMs must be moved back.

A customer has an ESXi Cluster with two 10GbE NICs on each node with the following requirements:* Solution must follow Nutanix Best Practices* Network configuration should be redundant* A vSphere Standard Switch must be utilizedWhich load balancing method should be used?

Route based on originating port ID

Route based on physical NIC load

A consultant creates three storage containers (container-1, container-2, container-3). The customer requires that only container-1, which will be utilized as an NFS datastore, be presented to external hosts.However, users are able to mount all three containers.What is causing this problem?

A Global whitelist entry was configured.

Compression was turned on for all containers.

A Container-level whitelist entry was configured.

Deduplication was turned on for all containers.

A Global whitelist entry was configured.

What reference materials should be provided to the customer during the Knowledge Transfer?

As-Built Guide, technical slides and checklist, links to documentation and resources

Questionnaire, technical slides and checklist, links to documentation and resources

As-Built Guide, technical slides and checklist, Network Diagram

As-Built Guide, Project Plan, links to documentation and resources

As-Built Guide, technical slides and checklist, links to documentation and resources

A consultant is planning a new cluster installation and needs to locate the Shared IPMI port for each of the specific nodes that the customer has bought.Which Support Portal location contains the document that would identify the port?

Hardware Replacement Documentation

A customer has Metro Availability configured in Automatic Resume Mode between Site A and Site B What happens to VMs if Primary Site A has full network failure?

Automatic protection domain promotion in Site B. VMs automatically restart in Site B

VMs continue to run on Site A following an automatic disable of protection domains.

An administrator must unwitness in Site B and promote protection domains in Site B for VMs to restart

An administrator must promote protection domains in Site B for VMs to restart.

A Nutanix cluster is deployed with the following configuration:* Three four-node blocks (A, B, and C)* All Flash Redundancy Factor 2What is the effect of simultaneous disk failures on two nodes located in block A?

VM read and write operations continue normally.

VMs are migrated off of the nodes with disk failures.

Each node with a failed disk is marked as degraded.

VM read and write operations continue normally.

VMs on the nodes with failed disks are unable to write data

An administrator needs to make sure an RF2 cluster can survive a complete rack failure without negatively effecting workload performance. The current cluster configuration consists of the following:* 30 nodes: distributed 10 nodes per rack across three 42U rack* Each nodes is configured with 40TB usable storage all flash (Cluster Total 1.2 PB Usable)* Current cluster utilization is 900TB storageWhich configuration changes should be made to make sure that the cluster meets the requirements?

Expanse the cluster by adding 3 additional nodes per rack, 9 nodes total.

Expanse the cluster by adding 2 additional nodes per rack, 6 nodes total.

Expanse the cluster by adding 9 nodes to a new 42U rack

Expanse the cluster by adding 8 nodes to a new 42U rack

An administrator is currently using both 10g uplink with LACP and balance-tcp. A single VM should not be allowed to use more than a single 10G uplink, and both uplinks should be utilized.Which two command should be used to configure the bond? (choose two)

Ovs-vsctl set port br0-up bond_mode=balance-slb

Ovs-vsctl set port br0-up other_config: bond-rebalance-interval=30000

Ovs-vsctl set port br0-up bond_mode=balance-slb

Ovs-vsctl set port br0-up bond_mode=balance-tcp

Ovs-vsctl set port br0-up bond_mode=active-backup

Ovs-vsctl set port br0-up other_config: bond-rebalance-interval=30000

An organization is running a Nutanix Cluster based on AOS 5.10.x and VMware vSphere 6.7. Currently, the CVM network is segmented and Storage only nodes not present.A new security project based on NSX is coming. VMware Distributed Virtual Switches are required. The administrator needs to prepare the environment for the new project.Which step should the administrator use to initiate the project?

Manually disable CVM network Segmentation

Enable Nutanix Flow at the Prism Central Level

Manually disable CVM network Segmentation

Convert storage only nodes into vSphere nodes

Enable Jumbo Frames to accommodate network frames

Over the period of 2 to 3 weeks, a cluster displays the following:* Periods where Warning Alerts of memory usage over 75% are asserted* Periods where Critical Warnings of memory usage over 90% are asserted* Periods of slow of frozen VDI desktops have caused work stoppage or slowdown* VDI clones have periodically not powered up when called, causing work stoppageWhich steps should be used to prioritize the administrator's troubleshooting efforts?

* Review Analysis Page for memory use pattern * Alert with VDI workload demand * Analyze current and future workload in the Capacity Runaway tab for sufficient resources

* Assess resource health on Hardware page * Review the Analysis page for memory usage demand * Determine the VDI workload-to-host affinity across the cluster

* Analyze Alert Pages for a root cause of memory problem * Analyze VM table page to access the VM functionality * Analyze the VDI Clone properties for possible VDI Workload stress

* Check Analysis page for CPU demand * Verify VDI workload property for memory subscription * Review the Hardware page to determine if the cluster has sufficient RAM

* Review Analysis Page for memory use pattern * Alert with VDI workload demand * Analyze current and future workload in the Capacity Runaway tab for sufficient resources

After the migration, some SQL queries take longer to execute than prior to migration.The following SQL best practices were applied while creating the SQL VM on Nutanix:* 8 vDisks per SQL server VM* Database and Log files on separate vDisk* 2 TempDB database drives and 1 TempDB log driveWhat should the administrator to do improve the SQL Server performance?

Create multiple TempDB data files and enable autogrowth

Redistribute existing data by creating additional database file and enable autogrowth

Create multiple TempDB data files and enable autogrowth

Create multiple SQL log files and disable autogrowth

Redistribute existing data by creating additional database files and disable autogrowth

Refer to the exhibit. An administrator receive the warning massages shown in the exhibit while validating cluster conversion from EXSi to AHV.What should the administrator do to address this warning in v Center Server?

Keep homogeneous adapter as active and standby

Keep active adapters od different speeds as active standby

Remove adapters that are active but not homogeneous.

Keep homogeneous adapter as active and standby

Remove the standby adapters under Teaming and Failover.

An administrator configure Active Directory (AD) authentication for their Nutanix environment. When login in using an AD user account, the login process takes more than one minute to complete. No delay occurs when logging a local account.What should the administrator confirm to resolve this issue?

Active directory lookups are configured to use Non-Recursive mode.

The user search base for the group is configured correctly

The domain controller being used is configured as a global catalog server.

Active directory lookups are configured to use Non-Recursive mode.

The service Account Username is correct for the domain.

A customer has the following requirement for a Nutanix cluster:Must support high-performance Nutanix Volumes iSCSI workloadsMust utilize AHV nodesMust use 10 GbE interfaceHow should the customer optimize networking?

Enable the use of Jumbo Frame on Host and CVM

Enable Jumbo Frame on just the Host

Convert Cluster to ESXi and enable Jumbo Frame on Host and CVM

Enable Jumbo Frames on just the CVM

Enable the use of Jumbo Frame on Host and CVM

A customer has a four-node cluster and is using Volume Groups to provide storage services to a SQL cluster.In the event of a CVM failure in the cluster, what is the expected IO path of the volume group's iSCSI targets?

vDisk directed to failed CVM are redirected to another CVM and automatically reconnect

vDisk directed at failure CVM are redirected to Data Services IP until CVM is reconnected

vDisk directed to CVM that failed to disconnect and will not reconnect without manual intervention

vDisk directed to failed CVM are redirected to another CVM and automatically reconnect

vDisk directed at failed CVM will disconnect and reconnect when the failed CVM comes back online

Refer to the exhibit.An administrator logged into Prism Element, notices the following in the home dashboard, and showing the exhibit.Which action should the administrator take next?

Configure the fqdn for the hosts indicated

Troubleshoot the zookeeper server issue

Re-run NCC specifying data_resiliency_check

Check the hardware page for disk failures

An administrator is trying to correct high cluster IOPs and Cluster Controller Latency. Networking is the suspected issue.Which networking parameters should be configured in the Nutanix cluster?

Number of NICs connected and frame size

Number of NICs connected and network latency.

Number of NICs connected and frame size

Number of NICs connected and bond state.

An administrator needs to configure snapshots for DR scenarios. The databases get refreshed on Friday nights regularly. The search service application re-indexes the new application on Saturday nights regularly. The remaining front-end and middle tier VMs are static but do get minor version updates weekly.The administrator needs to have 2 weeks of daily snapshots for all the VMs in an app group and 2 weeks application consist local snapshots only on Fridays, Saturdays and Sundays on the same group of VMs.Which two options should the administrator use to configure snapshots?

Create one protection domain for all VMs in an application group with scheduled daily non-application consistent snapshots and another protection domain for all VMs in an application group with scheduled Friday. Saturday, Sunday application consistent snapshots.

Create a schedule in a protection domain for all applicable VMs to snap daily with application consistency enabled with 6 days of retention and with no application consistency and 14 days local retention.

Create two consistency groups in a protection domain, one for front-end and middle tier apps with no application consistency, one for database and Search apps with application consistency, and apply the correct schedule to both groups.

Create one protection domain for all VMs in an application group with scheduled daily non-application consistent snapshots and another protection domain for all VMs in an application group with scheduled Friday. Saturday, Sunday application consistent snapshots.

Create a protection domain for all VMs

An administrator needs to install prism central for their 2550 multi-cluster environment.How should they deploy the application?

Deploy a large 3-VM Prism Central instance

Deploy a large 1-VM Prism Central instance.

Deploy a small 3-VM Prism Central instance.

Deploy a small 1-VM Prism Central instance.

An administrator recently added in 3 nodes to an existing 5 node cluster. While 1 node came with its own block, the other 2 nodes where added to an existing share. After adding the nodes, the administrator sees that the hardware tab displays the correct number of nodes, but incorrect position in the diagram tab.What should the administrator do to resolve the issue?

Check the factory_config.json for all 3 nodes

SSH into CVM and perform genesis restart on each CVM

SSH into the CVMs and run genesis acropolis stop; cluster start

Check the factory_config. json for the two single nodes.

The following critical Availability Alert displays in prism Central: The protection Policy PP-BCA-1HR includes a business critical application with a 1-hour snapshot frequency.What is causing this issue?

Workloads included in PP-BCA-1HR are no longer within their intended RPO.

There is a scheduled outage for the Availability Zone referenced in Protection Policy PP-BCA-1HR.

Workloads included in PP-BCA-1HR are no longer within their intended RPO.

Prism Central in the Availability Zone for PP-BCA-1HR is unavailable.

NearSync replication between the Availability Zones has fallen out of scope.

The following alert appears on the file server alerts tab in the file server dashboard: Which two events can generate this alert? (choose two)

A node failed in a three-node cluster.

A node is set to the maintenance mode in a three node cluster.

A three-node duster hosting the file server is undergoing AOS upgrade.

A node failed in a three-node cluster.

A Nutanix file with four hie server VMs is deployed on a three-node duster.

A node is set to the maintenance mode in a three node cluster.

A systems administrator configures a protection domain replication between two Nutanix clusters. After the first successful replication , the administrator tests DR by clicking activate on the remote cluster.While VMs are active on the remote cluster, the protection domain is marked as active on both clusters.What steps are required to return both clusters to their original state?

1. On the prima7 site, suspend replications 2. On the remote site, deactivate the Protection Domain using ncli 3. On the remote site, migrate the protection domain back to the primary site

1. On the remote site, deactivate the Protection Domain using ncli 2. On the primary site, select the Protection Domain and dick migrate

1. On the remote site, promote the Protection Domain 2. On the primary site, change the Protection Domain state from Decoupled to Disabled 3 Enable the original primary site as remote site

1. On the prima7 site, suspend replications 2. On the remote site, deactivate the Protection Domain using ncli 3. On the remote site, migrate the protection domain back to the primary site

1 On the remote site, restore the snapshots from the Protection Domain 2. On the remote site, select the Protection Domain and migrate to the primary site