Which Data ONTAP option would you enable to set system wide throttling for all transfers?

options replication.throttle.enable

options transfer.throttle.enable

options replication.wide.enable

Fill in the blanks for the following statement:The qtree specified for_____must not exist on the secondary system before you run the_____command.

sec_qtree_path. snapvault start

pri_qtree_path. snapvault start

sec_qtree_path. snapvault enable

pri_qtree_path. snapvault enable

The snapvault restore command is ran on the:

Primary system to pull data from the secondary system

Primary Open System to pull data from the secondary system

Secondary system to push data to the primary storage appliance

Secondary system to push data to Open System

The snapvault snap create volume snapname command can be executed on the__________.

secondary or primary appliance systems

How can you 'throttle' Snap Vault updates and baseline transfers so that the primary or secondary is not transmitting data as fast as it can?

Use the -k option in the snapvault start command.

Use the snapvault throttle command.

SnapVault doesnt support throttling of network throughput

If an error message indicates that the cluster interconnect adapter itself is faulty, what is your corrective action?

Re-cable the cluster interconnect adapter or replace the adapter if needed.

Check the cabling of the Channel A disk shelf loop and reseat and tighten any loose cables.

Check the cabling of the Channel B disk shelf loop and reseat and tighten any loose cables.

Re-cable the cluster interconnect adapter or replace the adapter if needed.

You are troubleshooting a clustered failover problem at a customer site. The customer explains that both storage appliances were NFS mounted onto the Solaris host. You attempt to create a file on the NFS mount point for the inaccessible appliance, but you get the following error:NFS server filer2 not responding still trying.Symptoms:1) When not in takeover mode, both storage appliances operate normally.2) In takeover mode, the taken over node is not accessible on the network.You perform a 'cf giveback' and you can now create a file over NFS on both appliances.What should vou do first to resolve this issue?

Use the cluster-config-checker.cgi to identify the problem and corrective action.

Replace the cluster interconnect card and run diagnostics 'all' to ensure proper system operation.

Use the cluster-config-checker.cgi to identify the problem and corrective action.

While troubleshooting a double disk failure with SyncMirror. You decide to remove and destroy a plex from a mirrored volume. What steps would you perform to remove a plex from a mirrored volume?

Ensure the plex is offline and use the vol destroy plexname command.

Ensure the plex is online and use the vol destroy plexname command.

Take the volume offline and use the vol destroy command.

Take the volume offline and use the vol destroy -f command.

A mirrored volume. volX. is composed of twelve 36-Gigabyre disks: six in volX/plex0. six in volX/plex1. A drive fails in plexl. bur pool 1 contains only 72-Gigabyte spare disks. Data ONTAP will do which of the following?

Choose a 72-Gigabyte disk and downsize it

Halt after 24 hours of running in degraded mode

Alert you that there are no 36-Gigabyte disks and wait for one to be inserted

Stop any applications that are running

The required hardware to add SyncMirror to an existing Clustered Failover system consists of:

Disk shelves, adapters and cabling

Disk shelves and cluster interconnect

Disk shelves, adapters and cabling

Disk shelves and termination switches

You have determined that the failure to a MetroChister is a disaster. Which step should you take?

Ensure the surviving node is isolated from its partner.

Force the surviving node to take over the functions of its partner.

Remount the failed partners volume.

After you use SnapRestore to revert a volume to a specific snapshot,....

snapshots that are more recent than the snapshot you used to revert are deleted.

snapshots that are older than the snapshot you used to revert are deleted.

the storage appliance automatically performs a snapshot for that volume.

snapshots that are more recent than the snapshot you used to revert are deleted.

you must bring the volume back online.

SnapMirror will automatically tiy to restart a transfer after_________.

A scheduled incremental update is interrupted

Ail initial transfer is interrupted

A scheduled incremental update is interrupted

A transfer interrupted by reboot

Which statement describes the results of the snapmirror resync command?

Resynchronization finds the newest common snapshot shared by the two volumes or qtrees, and removes all newer information on the storage appliance on which the command is run.

Resynchronization will cause the loss of all data written to the destination after the original base snapshot was made.

Resynchronization will update the snapshot on the source filer

Resynchronization will update the snapshot on the destination filer.

Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)

using option semi-sync in DOT 7.3 and higher

In a fabric-attached MetroCluster, a 'site failure' is described as a __________.

complete failure of the primary controller and disk shelves

failure of the Inter-Switch-Links (ISL)

failure of the interconnect cable

complete failure of the primary controller and disk shelves

malfunction of the Fibre Channel adapter on the cluster node

Which is true of the SnapVault backup of NetApp storage system?

The qtree is the basic unit for SnapVault backup destination

The file is the basic unit for SnapVault backup destination.

The qtree is the basic unit for SnapVault backup destination

The volume is the basic unit of SnapVault backup destination.

The directory is the basic unit for SnapVault backup destination.

Network Appliance NS0-163 Practice Test 4 - Free Online Exam Prep & Questions

Which one of the following is not recommended as a secondary system for SnapVault?

NearStore R200

FAS900 series

F700 series

FS80

Comment (0)

Network Appliance NS0-163 Practice Test 4

Question

Network Appliance NS0-163 Practice Tests

Practice Tests