Which command disables client access to Snapshot copies on a volume called flexvol1?

vol options flexvol1 nosnapdir on

cifs shares-change flexvol1 -nosnap

vol options flexvol1 nosnapdir on

vol options flexvol1 snapdir off

vol options flexvol1 snapdir on

In a fabric-attached MetroCluster, hardware disk ownership by a node is determined by which two factors (Choose two.)

the location of the HBA or onboard port

which switch ports the controller and disks are connected to

the system ID of the controller

what types of ports are on the HBA

the location of the HBA or onboard port

what types of disks are used in the cluster

how the disks are configured by the administrator

which switch ports the controller and disks are connected to

After issuing the aggr split aggr0/plex0 aggrNew command ____________.

there are two unmirrored aggregates, aggr0 and aggrNew

there is a new plex called aggrNew

there are two new plexes, plex0 and plexNew

there is a new mirrored aggregate called aggrNew

there are two unmirrored aggregates, aggr0 and aggrNew

flexible volumes are evenly split between aggr0 and aggrNew

An aggregate is composed of twelve 36-Gigabyte disks. A drive fails and only 72-Gigabyte spare disks are available Data ONTAP will then perform what action?

chooses a 72-Gigabyte disk and right-size it

chooses a 72-Gigabyte disk and use it as is

chooses a 72-Gigabyte disk and right-size it

halts after 24 hours of running in degraded mode

alerts you that there are no 36-Gigabyte disks and wait for one to be inserted

To restore a qtree protected with SnapVault from the secondary storage system to the primary storage system, you can ______________. (Choose two.)

restore to a non existing qtree, with DOT 7. 2

overwrite the existing qtree on the primary storage system with DOT 7.3

restore to a non existing qtree, with DOT 7. 2

add the new qtree to the primary storage system with DOT 7.2

overwrite the existing qtree on the primary storage system with DOT 7.3

delete the existing qtree from the secondary storage system with DOT 7.3

Which are three valid data protection solutions? (Choose three.)

SnapVault to Volume SnapMirror to Volume SnapMirror

SnapVault to Volume SnapMirror to SnapVault

SnapVault to Volume SnapMirror to Volume SnapMirror

A SnapVault secondary volume can contain up to ______________ Snapshot copies for data protection.

Depends on capacity and number of disk drives

For DOT 7.3 and higher, which is true about SnapVault or Open Systems SnapVault and deduplication?

When enabled on the secondary system, deduplication runs after each SnapVault / Open Systems SnapVault transfer.

Deduplication is not supported with SnapVault/ Open Systems SnapVault.

A deduplication schedule can be enabled for SnapVault secondary systems.

Deduplication is recommended for SnapVault primary systems because it replicates data in a deduplicated state

When enabled on the secondary system, deduplication runs after each SnapVault / Open Systems SnapVault transfer.

Which three statements apply to NearStore Personality license? (Choose three.)

it converts the destination storage system to a NearStore system.

It requires the nearstore_option license on the destination storage system.

it provides increased concurrent streams when the storage systems are used as destinations for SnapMirror and SnapVault transfers.

it increases the storage capacity.

it converts the destination storage system to a NearStore system.

It requires the nearstore_option license on the destination storage system.

it provides increased concurrent streams when the storage systems are used as destinations for SnapMirror and SnapVault transfers.

Before enabling an active/active configuration, you should verify and compare the configuration of the nodes. Which tool can perform this task?

cf status command on both nodes

The required hardware to add SyncMirror to an existing system would be ___________.

disk shelves, Fibre Channel adapters, and cabling

disk shelves and cluster interconnect

disk shelves and termination switches

disk shelves, Ethernet adapters, and cabling

disk shelves, Fibre Channel adapters, and cabling

Which two configurations ensure end users are able to restore previous versions of files? (Choose two.)

Share previous versions enabled

An administrator has an ESXi cluster with VMware VMFS LUNs on an AFF system. Alter troubleshooting performance issues, the administrator determines that timeout best practices are not set on the hosts.Which NetApp tool would apply the best practice settings?

SnapCenter Plug-in for VMware vSphere

After configuring an ONTAP duster for SAN access, the administrator is notified that the cluster nodes are connected to separate fc switches.Given the following output: What action will correct the redundancy issue?

swap cable at node-01 / Id with cable at node-02 / Id

swap cable at node-01 / lb with cable at node-02 / lb

swap cable at node-01 / la with cable at node-01 / Id

swap cable at node-01 / lc with cable at node-02 / lc

What should be done to non-distuptlvely correct capacity Imbalances in a FlexGroup?

Perform a rebalance of the FlexGroup constituents

Convert the FlexGroup to a FlexVol

Move the FlexGroup to a different aggregate

Move the constituent to a new aggregate

Perform a rebalance of the FlexGroup constituents

Network Appliance NS0-163 Practice Test 5 - Free Online Exam Prep & Questions

Spam

Selling illegal goods, money scams etc.

Hate Speech

Serious attack on a group.

Harassment and bullying

Harassing an individual (including doxing)

Harmful activities

Threatening or glorifying violence or serious harm, including self-harm

Adult content (Consensual)

Nudity/Sexual content

Sexual exploitation and abuse (child safety)

Sexually explicit or suggestive imagery or writing involving minors

Sexual exploitation and abuse (adults and animals)

Sexually explicit or suggestive imagery or writing involving non-consenting adults or non-humans

Plagiarism

Reusing content without attribution (link and blockquotes)

Poorly written

Not in English or has very bad formatting, grammar, and spelling

Inappropriate credential

Author's credential is offensive, spam, or impersonation

Other

Ex. Illegal content, incomplete question...

Network Appliance NS0-163 Practice Test 5

Question

Network Appliance NS0-163 Practice Tests

Practice Tests