Refer to the exhibit. A network engineer configures an EEM script to get a syslog notification after a configuration change.This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?

event cli match ‘configure terminal’

event policy-default count 1 time 100

An upgrade of protected RPMs from the Bash shell did not take effect. Which action is required for the changes to take effect?

Upgrade the RPMs from the Guest shell.

Disable and reenable the Bash feature.

Refer to the exhibit. Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected.WAN-1 is for normal business-day activities.WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily.The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?

The applet called “Backup” must include an action to remove the current static route.

The event timer must be written in epoch time format.

The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail.

The Cron entry must be configured without double quotes.

The applet called “Backup” must include an action to remove the current static route.

A network administrator attempts to install an application in the Cisco NX-OS Guest shell and receives an error that there is not enough space on the disk. Which command must the administrator run to increase the disk space available in the Guest shell?

guestshell resize rootfs [size-in-MB]

guestshell growdisk rootfs [size-in-MB]

guestshell pvextend rootfs [size-in-MB]

guestshell resize rootfs [size-in-MB]

guestshell resize2fs rootfs [size-in-MB]

An engineer is troubleshooting a custom AV pair that was created by a client on an external authentication server to map a read-only role for a specific security domain. Which AV pair solves the problem?

shell:domains=Security_Domain_1/Read_Role_1|Read_Role_2

shell:domains=Security_Domain_1//Read_Role_1|Read_Role_2

shell:domains=Security_Domain_1/Write_Role_1|Read_Role_2

shell=Security_Domain_1/Read_Role_1|Read_Role_2

shell:domains=Security_Domain_1/Read_Role_1|Read_Role_2

A request to activate the port security database is rejected. Which action do you perform to investigate the cause of the issue?

Use the force option to identify rejected devices.

Enable the auto-learning feature.

Use the force option to identify rejected devices.

Find conflicting entries between the active and configuration databases.

Verify that devices are fully attached to the active database.

A server administrator attempts to change the Cisco IMC KVM certificate to one signed by a private CA, but the certificate is not being accepted. What can cause this process to fail?

using a certificate with a password-protected private key

RSA encryption being used in the generation of the certificate.

AES encryption being used in the generation of the certificate.

public IP addres of the Cisco IMC not being included in the SAN.

Refer to the exhibit. Cisco UCS Manager is being upgraded using the Auto Install feature, but the FSM fails. Which action resolves the issue?

Clear the startup version of the default infrastructure pack.

Acknowledge the primary fabric interconnect.

Remove the service pack from the subordinate fabric interconnect.

Clear the startup version of the default infrastructure pack.

Upgrade the firmware of the infrastructure firmware by using the force option.

An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?

Use AutoInstall to reinstall the firmware.

Restore UCSM configuration from backup.

Roll back to the previous firmware.

Use AutoInstall to reinstall the firmware.

From the peer IOM, reset the faulty module.

Refer to an exhibit. An engineer is troubleshooting an upgrade failure on a switch. Which action resolves the issue?

Save the system image in NVRAM.

Use the same system image as the kickstart image.

After upgrading a client’s fabric interconnect to the latest version, an engineer discovers that the appliance has lost its entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)

Equipment FSM page, InternalBackup stage

Equipment FSM page, PollInternalBackup stage

Equipment FSM page, InternalBackup stage

Service profiles page, InternalBackup stage

Admin page, PollInternalBackup stage

Equipment FSM page, PollInternalBackup stage

Admin page, InternalBackup stage.

Refer to the exhibit. A PC belongs to VLAN 68 The user experiences a large amount of packet loss when communicating with hosts that are outside of VLAN 68. Which action resolves the problem?

Enable the peer-gateway feature

Configure ip arp synchronization on both switches.

Refer to the exhibit. An upgrade operation fails with an error displayed. Which action resolve the issue?

Use a different kickstart image

Allocate extra space on a flash drive to extract a kickstart image

Allocate extra space on a flash drive to extract a system image

An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?

Install Infrastructure Firmware, then Install Server Firmware.

Install infrastructure Firmware, then Install Hypervisor Firmware.

Install Hypervisor Firmware, then Install Infrastructure Firmware

Install Server Firmware, then Install Infrastructure Firmware

Refer to the exhibit. The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration set must be added to the script to fix the issue?A. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1switch(config-apple)# action 0.2 cli enableswitch(config-apple)# action 0.5 cli switchto vdc Coreswitch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1switch(config-apple)# action 0.2 cli config tswitch(config-apple)# action 0.5 cli switchto vdc Coreswitch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1switch(config-apple)# action 0.2 cli enableswitch(config-apple)# action 0.5 cli switchto vdc Coreswitch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1switch(config-apple)# action 0.2 cli config tswitch(config-apple)# action 0.5 cli switchto vdc Coreswitch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1switch(config-apple)# action 0.2 cli config tswitch(config-apple)# action 0.5 cli switchto vdc Coreswitch(config-apple)# action 0.8 cli switchto vdc Distribution

An engineer must place a Cisco UCS B-Series Server in a single server pool in Cisco UCS Manager. The engineer creates a qualification policy, but the server is still seen in multiple pools. Which two actions resolve the issue? (Choose two.)

Select the Server Pool Policy Qualification from the qualification drop-down menu in the Server Pool Policy

Set the operating system qualifier inside the Server Pool Policy Qualification

Select the Server Pool Policy Qualification from the qualification drop-down menu in the Server Pool Policy

Select the Server Pool Policy from the qualification drop-down menu in the Server Pool Policy Qualification

Set the operating system qualifier inside the Server Pool Policy Qualification

Set the number of vNICs qualifier inside the Server Pool Policy.

Set the storage capacity qualifier inside the Server Poo. Policy Qualification.

Refer to the exhibit. An engineer deploys SAN environment with two interconnected Cisco MDS 9000 Series switches.When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit.Which action resolves the issue?

Ensure that the zone members have different names.

Import or export a zone set between the switches to synchronize the switches.

Change the name of one of the zones to match the other zone set.

Set the distribute policy of the zone to full.

Ensure that the zone members have different names.

Refer to the exhibit. During implementation of a Cisco UCS C-Series Server, an engineer receives the status that is shown in the exhibit. Which action resolves the issue.

Reconfigure the Drive Type from "Removable" to "Non-Removable"

Configure the RAID that is associated with the card.

Refer to the exhibit. An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues. Which action resolves the issue?

Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.

Set the local group number as 300 in the remote data center configuration

Run version 1 and version 2 HSRP on VLAN300 in the local data center.

Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.

During a boot process of a Cisco UCS C-Series Rack Server, an engineer receives a "No Signal" message from the vKVM and physical connection. Which set of steps resolves the issue?A. 1- Disconnect the power cord2- Confirm that all cards are property seated3- Connect the power cord and power on the server

1- Power off the server and disconnect the power cord2- Confirm that all cards are available3- Connect the power cord and power on the server

1- Power off the server and disconnect the power cord2- Confirm that all cards are property seated3- Connect the power cord and power on the server

1- Power off the server and disconnect the power cord2- Confirm that all cards are available3- Connect the power cord and power on the server

1- Disconnect the power cord2- Confirm that all cards are properly seated3- Connect the power cord

An engineer must configure Linux hosts that are deployed on Cisco UCS B-Series Servers to boot from SAN. The SAN boot policy is configured in Cisco UCS Manager, and the boot order is verified to be set as expected However, the Linux hosts fail to boot. Which action resolves the issue?

Remove all of the local storage that is installed

Delete and reconfigure the pWWN of the SAN boot target

Remove all of the ISO images that are mounted as a virtual CD-ROM

Delete and reconfigure the boot LUN

Refer to the Exhibit. An Engineer cannot log in to the Cisco IMC page of the Cisco UCS C220 server. Which action resolve the issue?

Replace the self-signed certificate that is installed on the Cisco IMC with a server certificate that is signed from the client corporate certificate.

Se the FQDN of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.

Use the DNS of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.

Replace the self-signed certificate that is installed on the Cisco IMC with a server certificate that is signed from the client corporate certificate.

Replace the self-signed certificate that is installed on the Cisco IMC with a user certificate that is signed from the client corporate certificate.

An engineer troubleshoots a VXLAN EVPN data center. The applications in the data center fail to reach the DNS server that is located at IP 10.10.10.10. The engineer examines the BGP EVPN routing table and notes that the IP prefix route covers the DNS server is missing. Which action resolve the issue?

Set the IP prefix route to represent [5]:[0]:[0]:[32]:[10.10.10.10]/224 in the routing table.

Configure an IP ARP entry to represent [2]:[0]:[0]:[48]:[0050.569f.1285]:[32]:[10.10.10.10]/272 in the routing table

Set the IP prefix route to represent [2]:[0]:[0]:[48]:[0050.569f.1285]:[0]:[0.0.0.0]/216 in the routing table

Configure an IP ARP entry to represent [4]:[0300.0000.00fc.bd00.0309l[32]:[10.10.10.10]/136,n the routing table

Refer to the exhibit. An engineer must connect N2K-Fex-1 and N5K-Core-1 so that the traffic flow between the two devices uses load balancing. After inspecting the statistics of the interconnecting interfaces, the engineer concludes that only one link is used.Which action resolves the problem?

Configure the pinning max-link as 2.

Configure source-destination load balancing on N5K-Core-1.

Configure each uplink to be a member of a separate LACP port channel.

Configure the pinning max-link as 2.

Configure destination-mac load balancing on N5K-Core-1

A system administrator adds two vNICs to an existing service profile that is used to run a vSphere environment to support disjoint Layer 2 network connectivity. However, after the server is rebooted, the host is not accessible on the networkWhich action resolves the issue?

Create a vNIC placement policy to avoid adapter renumbering

Remove all existing vNICs and add them in the desired order.

Build a new service profile with the desired network configuration

Add the disjoint Layer 2 VLANs to an existing vNIC rather than adding new vNICs

Create a vNIC placement policy to avoid adapter renumbering

An engineer enables the packet postcards feature on a Cisco Nexus 9000 Series Switch but receives the error message "Error: Cannot configure postcard when inband-telemetry is configured." Which action resolves the issue?

Disable the hardware-telemetry feature

Disable the software-telemetry feature

Disable the hardware-telemetry feature

Disable the inband-telemetry feature

A Cisco UCSB-Series Blade Server is configured to boot a VMwareESXi host from an EMC VNX storage array by using a Fibre Channel SAN. The boot order is confirmed to be configured as expected but the server fails to boot from the SAN. Which action reserves the problem?

Set the boot LUN to the lowest LUN ID in the storage array

Set the same WWPN pools for vHBA adapters

Set the boot LUN to the highest LUN ID in the storage array

Set the boot LUN to the lowest LUN ID in the storage array

Set the same WWNN pools for vHBA adaptor

The external routes fail to propagate to leaf switches in Cisco ACI fabric Which two actions resolve the issue? (Choose two.)

Assign an MP-BGP AS number to the fabric.

Specify the spine nodes as route reflectors

Enable the VTEP pool in the fabric

Assign an MP-BGP AS number to the fabric.

Specify the spine nodes as route reflectors

Associate the correct contract to the L30ut.

Refer to the exhibit. The vPC between switch1 and switch2 does not work. Which two actions resolve the problem?(Choose two.)

Correct the configuration of the vPC peer link and the vPC peer keepalive.

Match the vPC domain ID between the two devices.

Configure the IP address on the interface.

Configure one of the switches as primary for the vPC.

Correct the configuration of the vPC peer link and the vPC peer keepalive.

Match the vPC domain ID between the two devices.

Refer to the exhibits. An engineer troubleshoots switch N5K1, which fails to receive traffic from the file server Which set of actions resolves this problem?

Bind native VLAN 10 with Ethemet10/1/1 and allow VLAN 10 in trunk configuration

Bind native VLAN 10 with Ethemet1/10 and allow VSAN 101 in trunk configuration.

Assign native VLAN 10 with vfc111 and allow VLAN 1101 in trunk configuration.

Bind native VLAN 10 with Ethemet10/1/1 and allow VLAN 10 in trunk configuration

Assign native VLAN 10 with fc2.'l - 2 and allow VLAN 10 in trunk configuration.

Refer to the exhibit. A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues. What is the role of the interface Eth1/7?

fabric interconnect uplink interface

A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?A. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels 2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.3) Check for runtime link down status4) Reseat the affected IOM.

1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.3) Check for runtime link down status.4) Reseat the affected IOM.

1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.3) Check for runtime link down status4) Reseat the affected IOM.

1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.3) Check for runtime link down status.4) Reseat the affected IOM.

1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.3) Check for runtime link down status.4) Reseat the affected IOM.

Refer to the exhibit. Refer to the exhibit. One of the vPC VTEPs fails to route VXLAN traffic to vPC connected hosts. When the issue was being diagnosed, it was discovered that the packets that were expected to be forwarded to the MAC address on the SWITCH-VTEP-1 are instead forwarded to the MAC address onSWITCH-VTEP-2 and then dropped. Which action resolves the issue?

Configure peer-gateway under the VPC domain on both peers

Configure a distributed anycast gateway on both peers

Configure ip arp synchronize under the VPC domain on both peers

Configure peer-gateway under the VPC domain on both peers

Configure a different secondary IP address for one of the vPC peers

Refer to the exhibit. Refer to the exhibit. An engineer troubleshoots an OSPF neighborship problem between Router R2 and Router R10. Which action resolves the problem?

Resolve unicast reply from Router R2

Resolve authentication type on Router R10

Refer to the exhibit. Refer to the exhibit. VSAN traffic is not routed as expected. Which action should be taken to resolve the issue?

Configure the hello timer to match the neighbor

Configure the FSPF dead interval with a value higher than 80 seconds

Reset the inactivity timer on switch-2

Refer to the exhibit. Refer to the exhibit. A network engineer configures an authentication domain through an LDAP provider on the Cisco UCS Manager for users from different companies to log into their respective organizations created in the UCS Manager.The engineer tests the configuration and notices that any user has login access to any organization in the UCS Manager. Which action should be taken to resolve the issue?

Configure the Filter field with sAMAccountName=$company

Configure the Attribute field with the company

Configure the Attribute field with sAMAccountName=$company

Configure the Filter field with the company

Cisco 300-615 Practice Test 2 - Free Online Exam Prep & Questions

Refer to the exhibit.

Cisco 300-615 image Question 41 113222 10072024010022000000

An engineer is investigating a role mapping issue on a switch. The users report that they cannot view the IP addresses under the tenant “corp”. Which action resolves the issue?

Become a Premium Member for full access

Unlock Premium Member

Cisco 300-615 Practice Test 2

Question

Cisco 300-615 Practice Tests

Practice Tests