Ask Question
300-615: Troubleshooting Cisco Data Center Infrastructure (DCIT)
Cisco
Exam Questions:
166
.png)
2.370 Learners
The Cisco 300-615 DCIT exam is essential for professionals specializing in troubleshooting Cisco Data Center Infrastructure. Explore our comprehensive resource for 300-615 practice tests, curated from the experiences of those who have successfully passed the exam. These practice tests offer realistic scenarios and invaluable insights to enhance your exam preparation.
Why Use 300-615 Practice Test?
-
Real Exam Experience: Our practice test accurately replicates the format and difficulty of the actual Cisco 300-615 exam, providing you with a realistic preparation experience.
-
Identify Knowledge Gaps: Practicing with these tests helps you identify areas where you need more study, allowing you to focus your efforts effectively.
-
Boost Confidence: Regular practice with exam-like questions builds your confidence and reduces test anxiety.
-
Track Your Progress: Monitor your performance over time to see your improvement and adjust your study plan accordingly.
Key Features of 300-615 Practice Test:
-
Up-to-Date Content: Our community ensures that the questions are regularly updated to reflect the latest exam objectives and technology trends.
-
Detailed Explanations: Each question comes with detailed explanations, helping you understand the correct answers and learn from any mistakes.
-
Comprehensive Coverage: The practice test covers all key topics of the Cisco 300-615 exam, including troubleshooting data center networking, storage networking, and compute platforms.
-
Customizable Practice: Create your own practice sessions based on specific topics or difficulty levels to tailor your study experience to your needs.
Exam number: 300-615
Exam name: Troubleshooting Cisco Data Center Infrastructure (DCIT 300-615)
Length of test: 90 minutes
Exam format: Multiple-choice, drag-and-drop, fill-in-the-blank, testlet, simlet, and simulation questions
Exam language: English
Number of questions in the actual exam: 55-65 questions
Passing score: Varies, typically around 750-850 out of 1000
Use the member-shared Cisco 300-615 Practice Test to ensure you’re fully prepared for your certification exam. Start practicing today and take a significant step towards achieving your certification goals!
Related questions
DRAG DROP
Drag each item listed on the left to its proper category on the right Not all items will fit the categories.
Unlock Premium Member
An engineer is implementing a new BGP peering in their new data center. The engineer set up the BGP session that peers with the remote end. As soon as the BGP peers attempt to exchange routing prefixes, one of the BGP peers drops the connection. After reviewing the configuration, the engineer reviews the logging messages. The engineer discovers that the router is missing keepalives from the remote end and terminates the session. Which action resolves the issue?
Set the bgp transport path-mtu-discovery attribute on both peers
Set the higher values for the BGP keepalive and hold-down timers on both peers
Configure the matching BGP AS numbers between the peers
Configure the matching BGP passwords between the peers
Refer to the exhibit.
Refer to the exhibit. A functioning trunk port Ethernet1/48 exists between two identical Cisco Nexus 5000 Series Switches. The interfaces on the switches support the MACsec feature and are configured identically. To enable manual
MACsec, an engineer adds the configuration shown in the exhibit to both sides of the trunk. The trunk port stops functioning. Which action should be taken to resolve the issue?
Disable and then enable the port
Enable the license for the trunk ports to support MACsec
Lower the MTU value to less than 9216 bytes
Configure the PMK with a length of 2048 bytes
A network engineer is implementing the Cisco ACI Fabric and notices that the Leaf-1 switch is registered, has an assigned name, but is displayed as inactive in the APIC. After further investigation, it became clear that the leaf switch was recently moved from another Cisco ACI environment. Which action resolves the problem?
Clean reload the Leaf-1 switch
Define the new TEP address for Leaf-1
Change the clock offset from low to high between apic 1 and Leaf-1
Modify the ISIS interface peering IP address between apic 1 and Leaf-1
Refer to the exhibit.
A client configures an upgrade of its Cisco Nexus switches that are connected to the Cisco ACI controller, such that the switches are upgraded one at a time. After the upgrade is run, it is discovered that both Cisco Nexus switches were upgraded simultaneously. Which two actions ensure that the switches upgrade one at a time? (Choose two.)
Configure the *Do not pause on failure and do not wait on cluster health" Run Mode
Choose the 'Pause upon upgrade failure" Run Mode
Select the "Graceful Maintenance" checkbox
Place each leaf switch in a different upgrade group
Check the Ignore Compatibility" checkbox
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooting_chapter_0100.html
A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?
A. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels 2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status
4) Reseat the affected IOM.
1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status
4) Reseat the affected IOM.
1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status.
4) Reseat the affected IOM.
1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status.
4) Reseat the affected IOM.
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooting_chapter_01001.html
Refer to the exhibit.
The FCoE traffic fails to traverse the vfc2 interface. The VSAN 102 is configured for vfc2. Which action resolves the issue?
Refer to the exhibit.
Refer to the exhibit. The monitoring team reports an inability to access the devices after a new centralized management integration. Which action resolves the issue?
When the engineer runs the command, this error is received: opsengineer@wkst1:/home/auto/bash_scripts$ curl –s –b cookie_file_39422186.txt –X GET –k 192.15.132.101/api/node/class/Tenant.json
{“totalCount”:”1”,”imdata”:[{“error”:{“attributes”:{“code”:”400”,”text”:”Request failed, (output omitted)”}}}]} Which action resolves the issue?
Regenerate the API token object
Modify the URI to 192.15.132.101/api/node/class/fvTenant.json
Add the –c class Tenant flag to the cURL command
Change the HTTP verb to POST
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/DEVNET-2000.pdf
Refer to the exhibit.
An administrator directly connects a Fibre Channel storage array to ports 1 through 4 on a Cisco UCS 6454 Fabric Interconnect. The administrator configures a service profile to boot directly from the new Fibre Channel storage array, but the service profile fails to boot. When the administrator checks the output of the show flogi database command on the fabric interconnect, it shows the output presented in the exhibit. Which action resolves the issue?
Question