ExamGecko
Login
Home / Cisco / 300-510 / List of questions
Ask Question

Cisco 300-510 Practice Test - Questions Answers, Page 4

Add to Whishlist

List of questions

Question 31

Report Export Collapse

Which two statements about mapping multicast IP addresses to MAC addresses are true? (Choose two.)

All mapped multicast MAC addresses begin with 0x0100.5E

All mapped multicast MAC addresses begin with 0x0100.5E

The router performs the mapping before it hands the packet off to a switch

The router performs the mapping before it hands the packet off to a switch

All multicast MAC addresses end with 0x0100.5E

All multicast MAC addresses end with 0x0100.5E

The mapping process may generate overlapping addresses, which can cause receivers to receive unwanted packets

The mapping process may generate overlapping addresses, which can cause receivers to receive unwanted packets

All destination MAC addresses begin with an octet of binary 1s

All destination MAC addresses begin with an octet of binary 1s

Suggested answer: A, D
asked 01/04/2025
Rodrigo Serrano dos Santos
40 questions

Question 32

Report Export Collapse

You have configured routing policies on a Cisco IOS XR device with routing policy language. Which two statements about the routing policies are true? (Choose two.)

The routing policies affect BGP-related routes only.

The routing policies affect BGP-related routes only.

If you make edits to an existing routing policy without pasting the full policy into the CLI, the previous policy is overwritten.

If you make edits to an existing routing policy without pasting the full policy into the CLI, the previous policy is overwritten.

You can change an existing routing policy by editing individual statements.

You can change an existing routing policy by editing individual statements.

The routing policies are implemented in a sequential manner.

The routing policies are implemented in a sequential manner.

The routing policies are implemented using route maps.

The routing policies are implemented using route maps.

Suggested answer: C, D
asked 01/04/2025
Ezrah James panuelos
41 questions

Question 33

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 33 63879133849279800571652

Which task must you perform on interface g1/0/0 to complete the SSM implementation?

configure OSPFv3

configure OSPFv3

enable CDP

enable CDP

disable IGMP

disable IGMP

configure IGMPv3

configure IGMPv3

Suggested answer: D
asked 01/04/2025
Mohamed Nacer Ferhi
48 questions

Question 34

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 34 63879133849295426288014

Which statement about this configuration is true?

Router 1 sends and receives multiple best paths from neighbor 192.168.1.1

Router 1 sends and receives multiple best paths from neighbor 192.168.1.1

Router 1 sends up to two paths to neighbor 192.168.1.1 for all routes

Router 1 sends up to two paths to neighbor 192.168.1.1 for all routes

Router 1 receives up to two paths from neighbor 192.168.1.1 for all routes in the same AS

Router 1 receives up to two paths from neighbor 192.168.1.1 for all routes in the same AS

Router 1 receives only the best path from neighbor 192.168.1.1

Router 1 receives only the best path from neighbor 192.168.1.1

Suggested answer: A
asked 01/04/2025
Fathy Refay
51 questions

Question 35

Report Export Collapse

Which cost is the default when redistributing routes from BGP to OSPF?

20

20

1

1

infinite

infinite

automatic

automatic

Suggested answer: B
asked 01/04/2025
GULNUR FICICILAR
36 questions

Question 36

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 36 63879133849295426288014

An engineer is troubleshooting an OSPF issue. Router 1 has a neighbor relationship with router 2. Only router 1 classful EIGRP routes can be seen on router 2. In order for all EIGRP routes to be redistributed correctly, which action should be taken?

Router 1 must have the keyword subnets included in the redistribution command for all EIGRP routes to be redistributed.

Router 1 must have the keyword subnets included in the redistribution command for all EIGRP routes to be redistributed.

Router 1 must remove the AS number 1 from the redistribution command for all EIGRP routes to be redistributed.

Router 1 must remove the AS number 1 from the redistribution command for all EIGRP routes to be redistributed.

Router 1 must have the keyword ospf-metric included in the redistribution command for all EIGRP routes to be redistributed.

Router 1 must have the keyword ospf-metric included in the redistribution command for all EIGRP routes to be redistributed.

Router 1 must have the keyword metric-type 1 included in the redistribution command for all EIGRP routes to be redistributed.

Router 1 must have the keyword metric-type 1 included in the redistribution command for all EIGRP routes to be redistributed.

Suggested answer: A
asked 01/04/2025
Ann Nacua
55 questions

Question 37

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 37 63879133849311050752134

A network operator must inject a Level 1 route from XR2 (10.16.16.0/24) into the ISIS

topology. Which configuration allows the injection in a way that XR3 and XR1 have a valid and working route for 10.16.16.0/24?

Cisco 300-510 image Question 37 63879133849311050752134

Cisco 300-510 image Question 37 63879133849311050752134

Option A

Option A

Option B

Option B

Option C

Option C

Option D

Option D

Suggested answer: D
Explanation:

L1 route injected by XR2 won't be advertised to XR1, since L2 routes are NOT leaked to L1 by default. An [L2-L1] route leak policy should be configured on L1/L2 router (XR3).

asked 01/04/2025
Adam Vce
43 questions

Question 38

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 38 63879133849311050752134

CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2. IS-IS is the only routing protocol running in the service provider core. What step can be done to troubleshoot the issue?

Switch the IGPs running in the core from IS-IS to OSPF to support a Cisco MPLS TE tunnel from PE1 to PE2.

Switch the IGPs running in the core from IS-IS to OSPF to support a Cisco MPLS TE tunnel from PE1 to PE2.

Configure BGP between CE and PE routers.

Configure BGP between CE and PE routers.

Confirm that IS-IS is running with metric-style narrow.

Confirm that IS-IS is running with metric-style narrow.

Verify the MPLS LSPs.

Verify the MPLS LSPs.

Suggested answer: D
asked 01/04/2025
Matt Smith
56 questions

Question 39

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 39 63879133849326675416254

Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed. Which statement about this configuration is true?

Router 1 must define an explicit path to router 2

Router 1 must define an explicit path to router 2

Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces

Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces

Router 2 must have a tunnel interface created with router 1 as the destination

Router 2 must have a tunnel interface created with router 1 as the destination

Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1

Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1

Suggested answer: D
asked 01/04/2025
Kevin Boddy
37 questions

Question 40

Report Export Collapse

Refer to the exhibit

Cisco 300-510 image Question 40 63879133849326675416254

Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?

R5

R5

R3

R3

R4

R4

R2

R2

Suggested answer: D
asked 01/04/2025
ERIC LUM
45 questions
Total 269 questions
Go to page: of 27
Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

Refer to the exhibit. The service provider deployed segment routing in its core P2 is connected to P3 and P4 via a point-to-multipoint link as shown The service provider provides connectivity for a large enterprise with three main offices in different geographic regions Each office is connected via one of the three PEs The enterprise wants to implement multicast traffic across the service provider to stream mission-critical applications between sites The applications will be sourced from a server connected to the network through PE2 Which action must the network-engineering team take so that multicast traffic will flow between the enterprise sites over the point-to-multipoint link?
The engineering team at ISP_1 must improve network stability time and minimize the impact of routing instabilities from other domains to unicast transit services in the backbone R1 is part of an OSPF- enabled network, and acts as an ASBR connected via interface GiO/1 to the external domain The OSPF exponential backoff algorithm RFC 3623 with helper mode is already implemented on R1 Which additional configuration must the ISP_1 team apply to suppress routing instability for 3 minutes'?
Refer to the exhibit. A network engineer at a large ISP with an employee ID 4876 94 052 started to configure OSPF on two routers The engineer notices that router 1 learned about network 20 20 20 0/24 from router 2, but router 2 did not learn about 10.10 10.0/24 from router 1 Layer 2 and Layer 3 connectivity are working between the two routers and the physical connection between the devices is functioning. Which action must the engineer take to resolve the issue?
Which BGP well-known attributes are preserved between peers with a BGP confederation?
Which fact must a network architect consider when implementing IGMP in a multicast routing environment?
RPL has several fundamental capabilities that differ from those present in configurations oriented to traditional route maps Routing policy language introduces the notion of sets Which group of set types is valid in RPL?
What are two major differences between OSPF and IS-IS routing protocols? (Choose two.)
Refer to the exhibit. Early in the growth cycle of a small enterprise the network-engineering team implemented segment routing to support automation of the IPv4 network As the network grew organically more devices were added and the company migrated to SRv6 The company is now planning to significantly expand the number of hosts connected to R2 and R6 which will require further path manipulation Which action must the team take to customize the route that traffic takes between endpoints in the network?
Refer to the exhibit. EBGP peering is up between BGP AS 65101 and BGP AS 65201 The service provider expects traffic convergence within 300ms between the two autonomous systems but the network operations team sees that route and traffic convergence is too slow Which two actions improve the convergence time? (Choose two.)
Refer to the exhibit. AJI four routers on the network reside in the same data center The four routers are running IS-IS between them in Level 1 mode within an IPv4 network After a network engineer installed several new servers connected to R4, users connected via R1 reported they could not connect to applications on the servers The engineer has determined that R4 is receiving routes from R3 but it is failing to receive routes from R1 Which action must the engineer take to resolve the issue?