Huawei H12-831_V1.0 Practice Test - Questions Answers, Page 11

In what ways can log information be viewed:

As shown in the figure, private network routing information is exchanged between PE1 and PE2 and their respective CEs through OSPF, and the same DomainlD is set on both PE1 and PE2. When routes are imported from BGP to OSPF on PE2, it is possible that Which of the following types of SAs are passed to CE2?

To prevent hackers from attacking user devices or networks through MA, C addresses, you can configure the MA, C addresses of untrusted users as black hole MA, C addresses to filter out illegal MA, C addresses.

Which of the following community attributes can ensure that the propagation scope of BGP routing entries is only within the AS?

A campus has deployed IPv6 for service testing. There are 4 routers (R1, 22, R3 and R4) in this network, running 0SPFV3 to realize the interconnection of IPv6 network. A new router R5 needs to be connected to the network for testing. An engineer introduces a direct route in the OSPFVV3 process of R4 so that devices in the campus network can access the GE0/0/1 port address of R5. Which of the following statements about the scene is true of?

As shown in the figure, MPLS/BGP IPVPN is deployed on the network. The MP-BGP neighbor relationship is established between PE1 and PE2 through the LoopbackD interface. After the configuration is complete, it is found that CE1 and CE2 cannot learn routes from each other. Run the command to check the error on PE2. The neighbor information is shown in the figure, what is the most likely cause of the problem?

You have set IS-IS IPv6 enable under the interface, what is the meaning of this command?

The ORF function of BGP can control the routing entries sent by neighbors. In order to achieve this purpose, the BGP router will send the list of routes to be filtered to the neighbors. Which tool is generally used to send the list to the neighbors?

Which of the following is not a hardware preparation for cutover?