Home / Huawei / H12-891

Huawei H12-891 Practice Test - Questions Answers, Page 27

Question list

List of questions

Question 261

(0)

When there are multiple redundant links in an IS-IS network, multiple equivalent routes may occur. Regarding equivalent routing within an IS-IS network, which of the following descriptions is wrong

Question 262

(0)

MQC, like PBRócan only be called under the device's Layer 3 interface.

Question 263

(0)

IsIS IPv6 cost 50 is configured under the interface, and the meaning of the command is ?

Question 264

(0)

Regarding the description of the BGP neighbor, the error is:

Question 265

(0)

The following statement about IS-IS (IPv6) is correct?

Question 266

(0)

In the evolution from IPv4 networks to IPv6, some transition technologies have emerged, which of the following are common types of transition technologies?

Question 267

(0)

Regarding the description of the encapsulation format of the labels in MPLS, the correct one is ?

Question 268

(0)

In an MPLS domain, depending on how the LSR handles the data, the LSR can be divided into Ingress LSR, Transit LSR, and Transit LSR Egress LSR? For the same FEC An LSR can be an Iningress LSR for th

Question 269

(0)

The following statement about the VPNv4 address is wrongly described as ?

Question 270

(0)

What about the description of IGMP Snooping, is it correct?

Question 261

When there are multiple redundant links in an IS-IS network, multiple equivalent routes may occur.

Regarding equivalent routing within an IS-IS network, which of the following descriptions is wrong?

When the number of equivalent routes present in the networking is greater than the number configured by the command, and these routes have the same priority, the next hop device System IlD large routes are preferred for load sharing

After you configure the equivalent routing priority, when the IS-S device forwards traffic to the destination segment, it will not use load sharing, but forward the traffic to the next hop with the highest priority

For each of the equivalent routes, you can assign a priority, with the highest priority routes preferred and the rest as backup routes

If load sharing is configured, traffic is evenly distributed across each link

Show Answer Comment (0)

Question 262

MQC, like PBRócan only be called under the device's Layer 3 interface.

TRUE

FALSE

Show Answer Comment (0)

Question 263

IsIS IPv6 cost 50 is configured under the interface, and the meaning of the command is ?

The LEVEL-1 and Level-2 costs of the interface's IS-IS IPv6 are 50

The LEVEL-1 and Leve1-2 costs of the INTERFACE's IS-IS IPv6 are both 60

The LEVEL-2 cost of the interface's IS-IS IPv6 is 50

The LEVEL-1 cost of the interface's IS-IS IPv6 is 50

Show Answer Comment (0)

Question 264

Regarding the description of the BGP neighbor, the error is:

BGP routers that support autodiscovery neighbors

BGP establishing neighbors must be configured with MD5 authentication

BGP needs to establish a UDP connection before establishing a neighbor

BGP to establish a neighbor relationship needs to first interact with the link state information

Show Answer Comment (0)

Question 265

The following statement about IS-IS (IPv6) is correct?

In order to support the processing and calculation of IPv6 routes, IS-IS has added TLV232 and 236

By default, IS-IS has the multi-topology feature turned on

IS-IS works at the data link layer and only needs to add a new TLV to support IPv6

In order to support the processing and calculation of IPv6 routes, IS-IS has added NLPID to the 129 TLV

Show Answer Comment (0)

Question 266

In the evolution from IPv4 networks to IPv6, some transition technologies have emerged, which of the following are common types of transition technologies?

Dual-stack technology

Tunneling Technology

Compatible with Technology

Conversion Technology

Show Answer Comment (0)

Question 267

Regarding the description of the encapsulation format of the labels in MPLS, the correct one is ?

The TTL field in the label has a similar meaning to the TTL (Time To Live) in the IP packet, and also has the effect of preventing loops

The total length of an MPLS single tag is 4 bytes (32 bits).

For Ethernet, PPP packets, the tag stack is like a "cushion layer", located between the layer 2 header and the data, and when there is a VLAN tag, the MPLS header is placed on the Ether head and VLANtag between

label in the S field, lbit Used to identify whether the label is a bottom label, and a value of 1 indicates that it is the penultimate label

Show Answer Comment (0)

Question 268

In an MPLS domain, depending on how the LSR handles the data, the LSR can be divided into Ingress LSR, Transit LSR, and Transit LSR Egress LSR? For the same FEC An LSR can be an Iningress LSR for that EC or a Transit for that FEC LSR.

TRUE

FALSE

Show Answer Comment (0)

Question 269

The following statement about the VPNv4 address is wrongly described as ?

By default, PE does not perform VPN-target filtering on received VPNv4 routes.

Local PE sets up An Export Target for these routes before releasing VPNv4 routes learned from sites that are directly connected to them to other PEEs attributes, and are published with routes as extended community attributes for BGP.

Carries the RD attribute when BGP publishes both reachable and unreachable VPNv4 routes.

The VPNv4 address has a total of 12 bytes, including an 8-byte route identifier RD (Route Distingulisher) and a 4-byte IPv4 Address prefix.

Show Answer Comment (0)