A customer just purchased a ProLiant DL385Gemo Plus and warns 10 team more about HPE intelligent Provisioning features.Which task can the customer complete using HPE Intelligent Provisioning?

install supported ESXt operating system

configure iLO Federation groups

Which storage array feature allows replication between the data center and AWS and Microsoft Azure?

Fully Provisioned Virtual Volume

Thin Provisioned Virtual Volume

A customer needs a storage solution to host a new virtualization platform that will host a database application. The customer is considering an HPE Nimble array.What features would lead you to propose an HPE Nimble array over an HPE 3PAR array (Select two.)

inline deduplication and compression

A customer wants to optimize the performance or its storage array by moving data residing in one class or disks to a more appropriate class of disks based on data access patterns without manual intervention.Which HPE storage techno logy/feature will meet the customer requirement when the data is stored on an HPE 3PAR storage?

Enable Automated Tiering on the Storage Pool level

Configure Adaptive Optimization with a minimum of 2 CPG's

Use Wide striping on the Storage Pool level

Activate SSD read cache on volume level

Enable Automated Tiering on the Storage Pool level

Refer to the exhibit. A customer has been using VEEAM and the HPE StoreOnce 3620 shown in the exhibit to backup their environment. The customer's legal team has asked to double their retention times for all backup sets, and they are starting to run out of space on the StoreOnce.Which options could you recommend that the customer add to their existing configuration to accommodate the new requirement? (Select two. Each option represents a separate solution.)

HPE StoreOnce Cloud Bank Storage

HPE StoreOnce 3620 24TB Capacity Upgrade Kit

HPE StoreOnce Cloud Bank Storage

HPE StoreOnce 3620 24TB Capacity Upgrade Kit

HPE StoreOnce Gen4 16Gb Fibre Channel Network Card

HPE StoreOnce Gen4 10/25Gb SFP Network card

When is it appropriate for a customer to implement HPE OneView Standard?

To enable the Advanced iLO license

What is an access port on an Ethernet switch?

A port that carries untagged frames inside the network

A port that carries FCP frames inside the network

A port that carries multiple VLANs

A port that is connected to an FCF

A port that carries untagged frames inside the network

A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type. The administrator expected the links to be aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.Switch A has the lower LACP System Priority.Which LACP operation states describe the failure above?

Switch A: Passive; Switch B: Passive

Switch A: Active; Switch B: Active

Switch A: Active; Switch B: Passive

Switch A: Passive; Switch B: Passive

Switch A: Passive; Switch B: Active

A customer has a VMware environment with HPE ProLiant servers and Nimble storage. They have been using a Windows VM to provide file services for their employees.The customer is experiencing performance issues with the solution due to memory constraints on the virtual environment.What could be added to the existing environment that will provide dedicated file services with better performance that would still utilize the existing storage and backup solutions?

HPE Storage Performance File Controller

HPE StoreEasy 1650 Expanded Storage

What is a feature of the MSA 1050 that will help your Storage Customer better utilize storage resources?

99.9999% guaranteed availability

Refer to the exhibit. A customer is planning to deploy a branch office server rackWhat should you change in your configuration to ensure it meets the customer requirements?

Change the 10GbE Optical ports to Fibre Channel.

Change the controller to an AF20.

Change the 10GbE Optical ports to Fibre Channel.

Change the 10GbE Optical ports to 10BaseT.

Change the controller to an HF20H.

A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASET Ethernet ports which need to be connected to the network.The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep the number of managed devices on the network to a minimum.Which architecture meets the customer requirements?

One IRF stack of four HPE 5710 48-port 1/10GBASE-T switches

One VSX stack of four Aruba 8320 48-port 1/10GBASE-T switches

Two IRF stacks of two HPE 5710 48-port 1/10GBASE-T switches

One IRF stack of four HPE 5710 48-port 1/10GBASE-T switches

Two VSX stacks of two Aruba 8320 48-port 1/10GBASE-T switches

A client complains about systems reliability issues caused by their staff's inability to identify the root cause of failures. The client's lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.What should you configure in HPE OneView to enable the external monitoring of the managed devices?

Configure SNMP Trap Forwarding.

Configure a scope to include the listener.

Configure SNMP Trap Forwarding.

Configure scheduled reports to export the data to the listener.

Configure the listener as a managed device.

A customer is planning to deploy a branch office server rack. The environment will have the following requirements:Single rack with 20 HPE ProLiant DL360 Gen10 Servers.Each Server will have 6 x 10G SFP+ Ports.Each Server will have a dedicated iLO port.The customer requires that only two switches be used.The customer requires separate control planes.Which switch configuration can meet these requirements?

2 × HPE 5945 Series switches standalone

2 × HPE 5945 Series switch with IRF

2 × Aruba 8325 Series switches with VSX

2 × HPE 5945 Series switches standalone

2 × Aruba 8325 Series switches with backplane stacking.

HPE Support asks you to generate an SSD wear gauge report for local storage on an HPE DL360 Gen10 server running VMware.Which procedure will ensure that the server will boot directly into a maintenance state so you can generate the requested report?

Changing the one-time boot option to Intelligent Provisioning in iLO web-based user interface

Changing the one-time boot option to Smart Storage Administrator in iLO web-based user interface

Use Always On functionality of Intelligent Provisioning

Changing the one-time boot option to Intelligent Provisioning in iLO web-based user interface

Click Boot to System Setup Utilities in iLO web-based user interface

Changing the one-time boot option to Intelligent Provisioning in HPE OneView

A customer needs a shared storage solution for a virtualization platform that will host a database application. The customer is considering an HPE Nimble array.Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?

Predictable performance event with one failed controller

Supported by Infosight for predictive analytics

Predictable performance event with one failed controller

HP HPE0-V14 Practice Test 1 - Free Online Exam Questions 1-40

Question 1 / 40

A customer purchased a Nimble HF20 a year ago They are experiencing an issue with a few of their VMware servers in the RTP Nimble date center and asked that you make a recommendation based on the data in infoSight.

HP HPE0-V14 image Question 1 13103 09162024180419000000

What should you recommend'?

Add cache to the array for the RTP Nimble Datacenter.

increase the cache size for VMware-DS-Space-NoDeDup

increase the datastore size for VMware-DS-Space-NoDeDup.

Add another datastore for the RTP Nimble Datacenter

Comment (0)

HP HPE0-V14 Practice Test 1

Question

HP HPE0-V14 Practice Tests

Practice Tests