A customer needs to enable HPE Proactive Care and automated case creation for server hardware failures in their OneView environment.Which step do you need to complete in OneView to accomplish these tasks?

Enable remote support from the Settings page.

Apply the OneView Advanced monitoring license.

Add the hosts to the managed devices group.

Configure proactive scan reports.

A customer wants to safeguard their server firmware and asks you about the HPE ProLiant Gen10 features that provide this level of security.Which Gen10 feature best addresses the customer's concern?

Gen10 servers use silicon root of trust to validate and detect corrupted firmware, and authentication to block unauthorized updates.

The Secure Boot feature in Gen10 servers checks the signature of the firmware drivers and other files to ensure that the firmware is trusted by the operating system.

Gen10 servers use silicon root of trust to validate and detect corrupted firmware, and authentication to block unauthorized updates.

Gen10 servers support data encryption at rest, which uses cryptography on the database housing the data and on the physical storage where the databases are stored.

The Trusted Platform Module (TPM) in Gen10 servers protects firmware by using public and private key encryption.

A customer needs a high level of flexibility and the most efficient use of available capacity in their MSA storage system.How should the MSA be configured?

Create multiple virtual volumes in a storage pool to share resources.

Assign drives directly to servers with Fibre Channel connections on the SAN.

Create multiple virtual volumes in a storage pool to share resources.

Create virtual volumes and map them to a host group without using initiators.

Create a linear disk group and add dedicated spares to the group.

Which statement is true regarding configuring memory in an HPE ProLiant server?

Different capability DIMMs of the same speed can be mixed.

LRDIMMS in 64 GB and 128 GB can be mixed.

RDIMM and LRDIMMs can be mixed in one system.

Different capability DIMMs of the same speed can be mixed.

The first CPU memory channel must be fully populated before the second.

You are creating an internal array on an HPE ProLiant server.What can you do to maximize the storage space efficiency?

Install drives that have the same capacity.

Populate drive bays with the smallest-capacity drive first.

Install drives that have the same capacity.

Match the device numbers for the drives with their bay numbers.

Populate drive bays with the largest-capacity drive first.

You are installing an HPE ProLiant server in a rack at a customer site. The customer's facility is in a high-voltage utility service area, and they want to be certain that the power supply is supported.Which ProLiant feature addresses the customer's concern?

ProLiant servers include auto-sensing power supplies with a power input range of 100-240 VAC, so they can be used globally.

ProLiant servers can be configured for 380 – 400V AC in low-line and high-line utility service areas.

ProLiant servers support 240 V DC power supplies because components in a direct current line are less prone to failure.

Rack-mountable HPE servers ship with 110 V DC power supplies because direct current is less expensive for a low-line utility service over short distances.

ProLiant servers include auto-sensing power supplies with a power input range of 100-240 VAC, so they can be used globally.

You are troubleshooting a customer's HPE ProLiant rack-mount server. The customer has configured the server in Legacy Boot BIOS Mode and is trying to boot from a USB 3.0 drive. The server will not boot from the drive.What should you do?

Set the USB 3.0 mode to Enabled.

Use the internal USB 3.0 connector.

Use the front-facing USB 3.0 connector.

You are configuring a FlexFabric switch for a customer environment. The customer has requested specific SFP+ transceivers, power options, and cables.Which HPE tool enables you to select and configure a switch according to precise specifications?

Single Point of Connectivity Knowledge (SPOCK)

A customer needs to purchase a redundant pair of SAN switches for their virtualization environment.The customer requires a total of eight 16 Gbps FC storage ports and eighteen 8 Gbps FC host attachments.Which switch meets the customer's needs at the lowest cost?

HPE StoreFabric SN6010C 12-port Switch with an On Demand Port Activation License

HPE StoreFabric SN6010C 48-port Switch

HPE StoreFabric SN6010C 12-port Switch with an On Demand Port Activation License

HPE 8/24 SAN Switch 16-port Switch with an 8-port Upgrade License

HPE 8/24 SAN Switch 16-port Switch

You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party networking equipment.Which HPE management solution meets the customer's needs?

Intelligent Resilient Framework

What can you do when installing an HPE switch to provide protection from electrostatic discharge?

Connect the switch grounding cable correctly.

Install the switch in a rack with rubber insulators.

Load balance the power supplies.

Connect the switch grounding cable correctly.

A customer requires a high level of network bandwidth and reliability. You are installing a pair of HPE switches that can provide redundancy with multiple connections between them for high availability and faster throughput.Which technology should you configure on the switches to enable the capability the customer requires?

Multichassis Link Aggregation (MLAG)

Rapid Spanning Tree Protocol (RSTP)

Virtual Extensible Local Area Network (VxLAN)

Multichassis Link Aggregation (MLAG)

Multiple Spanning Tree Protocol (MSTP)

When should you use the HPE Switch Selector?

when you need to compare features between multiple switches

when you need to list the price information of the switches

when you need to select a switch VLAN configuration

when you need to compare features between multiple switches

when you need to perform a competitive analysis between vendors

HP HPE0-V14 Practice Test 5 - Free Online Exam Questions 161-200

You plan to perform maintenance on several systems in a rack. You need to ensure that the rack does not tip when you are working on the equipment.

What should you use?

Become a Premium Member for full access

Unlock Premium Member

HP HPE0-V14 Practice Test 5

Question

Drag and Drop

Hot Area

HP HPE0-V14 Practice Tests

Practice Tests