You are onsite at a customer location to install a new network switch. The customer wants users to be able to manage the switch through the IP network.How should you connect the switch to the network?

Configure the management IP address on the switch and enable Telnet or SSH access

Configure multiple user IDs or roles for the console connection

Configure the management IP address on the switch and enable Telnet or SSH access

Use a dedicated console cable to create a dedicated management network for every user

Connect the switch to the network by using the serial cable that ships with the switch

You are installing a server solution in a customer's data center.How can you ensure that the installation complies with relevant electrical best practices? (Choose two.)

Do not allow the overall system AC current load to exceed 80% of the branch circuit AC current rating

Balance the server power load between available AC supply branch circuits

Use a single-phase, two-wire power receptacle with protective earth or ground (PE) to filter interference from the power grid

Do not allow the overall system AC current load to exceed 80% of the branch circuit AC current rating

Use fanout cables when connecting the server to the network for maximum electrical impedance

Balance the server power load between available AC supply branch circuits

Configure the server power to a single electrical circuit in the data center

Which two HPE applications are installed on Windows operating systems with intelligent Provisioning? (Choose two.)

Lights-Out Online Configuration Utility

You are designing a server solution that requires a significant amount of memory.Which guideline should you keep in mind when working with memory channels?

To maximize performance, balance the total memory capacity across all installed processors, and load the channels similarly

Install memory DIMMs of different speeds and sizes in pairs in adjoining sockets on the same memory data bus

To maximize performance, balance the total memory capacity across all installed processors, and load the channels similarly

On a single-CPU server, install the first memory DIMM in channel one, the second in channel two, the third in channel three, and so on

For the best reliability, install DIMMs of different speeds and sizes in a single memory channel

You are troubleshooting a HPE ProLiant rack-mount server. You notice that all front-panel status LEDs flash simultaneously.What does this indicate has occurred on the server?

an invalid memory configuration

A customer plans to use HPE ProLiant servers for an application that requires low latency for all components.Which workload profile should the customer use?

Virtualization – Max Performance

Transactional Application Processing

A Nimble storage customer is experiencing rapid data growth and needs to scale their storage resources.Which action should the customer take first?

Access InfoSight for recommendations

Access the SSMC for upgrade advice

Access the clustering feature in the CMC to configure active/active clustering

Access Smart Storage Administrator to configure additional storage resources

You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to install the firmware on the second switch.What must you do to install the firmware on the second switch?

Perform a hot reset on the second switch after the first switch is activated

Perform a hot reset on the first switch to initiate the installation on the second switch

Reactivate the upgrade on the first switch before attempting to update the firmware on the second switch

Reinitialize the devices attached to the first switch before installing the firmware on the second switch

Perform a hot reset on the second switch after the first switch is activated

Which HPE tool can securely erase current content of a server and help with consistent and easy operating system installation?

HPE Intelligent Management Center (IMC)

You are installing a data center switch.Which methods are recommended to configure the switch? (Choose two.)

Use out-of-band management with a dedicated management connection

Use in-band management with an IP address and subnet mask that is reachable on the management network

Use out-of-band management with a dedicated management connection

Use in-band management with an IP address and subnet mask that is reachable on the management network

Use out-of-band management and keep the default settings

Use in-band management and configure the AUX0 interface for scheme authentication

You are installing new drives into the internal cage of a HPE ProLiant DL380 server.How is the drive device number set?

The Smart Array controller assigns the device number automatically based on the bay

HPE OneView uses the server profile to assign the device number

The operating system assigns the device number automatically based on the drive installation order

You must use Smart Storage Administrator to assign the device number

You are creating a logical array on an HPE ProLiant server. The customer asks you to use drives with different capacities in a single array.What should you explain to this customer?

The extra capacity of the larger drives will not be utilized

Using drives with different capacities in a single array increases the chance of disk failure

The extra capacity of the larger drives will not be utilized

The process to create the array will fail, and the server will not boot

The RAID level will be set at RAID 0 automatically

A customer is configuring their SAN.Which types of data typically require block storage? (Choose two.)

Bridgehead medical image archive

A customer has a HPE OneView environment and has added all their HPE ProLiant servers and enclosures.Which benefits does a customer gain by configuring Remote Support on their environment? (Choose two.)

HPE Proactive Care is enabled and cases are created automatically in the event of hardware failures

Proactive Scan reports and firmware/software analysis reports can be provided from collected data

Support case resolutions are automatically generated for them based on real-time analyses

HPE is given remote access rights to registered devices for quick and accurate problem resolution

HPE Proactive Care is enabled and cases are created automatically in the event of hardware failures

Proactive Scan reports and firmware/software analysis reports can be provided from collected data

Real-time performance analytics result in failure predictions and online self-healing

Why is RAID 6 the best option for a large RAID set for archive storage on large-capacity drives?

to reduce risk during volume rebuild

to increase write performance on the volume

to maximize capacity of the volume

You are installing a combined server and storage solution at a customer location. What must you keep in mind regarding the typical requirements for the location? (Choose two.)

Room temperature must not exceed 35 °C (95 °F)

There must be at least a 10 cm (4 in) clearance space at the front and back of the components within the racks

Room temperature must not exceed 35 °C (95 °F)

Rack tie kit should be installed on the rack for proper airflow

UPSs should be installed at the top of the rack for top mounted power feed

There must be at least a 10 cm (4 in) clearance space at the front and back of the components within the racks

Rack doors must be unlocked for easy component removal and maintenance

A customer needs a storage to run a database in an environment with many virtual machines. You have recommended a HPE MSA 2042 solution, but the customer has reservations about whether the MSA 2042 can deliver the required performance.Which feature of MSA 2042 will help to improve iOP performance?

RAID 6 Advanced Data Guarding (ADG)

HP HPE0-V14 Practice Test 6 - Free Online Exam Questions 201-240

You are installing a HPE MSA storage system and need to connect the power cooling module (PCM).

What should you do to ensure power redundancy?

Become a Premium Member for full access

Unlock Premium Member

HP HPE0-V14 Practice Test 6

Question

HP HPE0-V14 Practice Tests

Practice Tests