Home / HP / HPE0-V14

HP HPE0-V14 Practice Test - Questions Answers, Page 23

Question list

List of questions

Question 221

(0)

You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient temperature of 45 °C (113 °F). Which additional option is required?

Question 222

(0)

You are installing additional components to a server. Which HPE resource provides Quickspecs that verify the compatibility of the server hardware with the server?

Question 223

(0)

You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to install the firmware on

Question 224

(0)

Which HPE tool can securely erase current content of a server and help with consistent and easy operating system installation?

Question 225

(0)

You are installing a data center switch. Which methods are recommended to configure the switch? (Choose two.)

Question 226

(0)

You are installing new drives into the internal cage of a HPE ProLiant DL380 server. How is the drive device number set?

Question 227

(0)

A customer is planning an upgrade in their data center. The customer needs to deploy on bare-metal and virtual servers easily through a common interface. In addition, they have expressed an interest

Question 228

(0)

You are creating a logical array on an HPE ProLiant server. The customer asks you to use drives with different capacities in a single array. What should you explain to this customer?

Question 229

(0)

A customer is configuring their SAN. Which types of data typically require block storage? (Choose two.)

Question 230

(0)

A customer requires a MSA storage system that they use for archiving dat a. The system needs to provide a large amount of storage. Which drive type meets the customer's needs?

Related questions

A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following: Multi-protocol connectivity Flash-accelerated storage Low-cost midline SAS drives Which HPE storage platform will meet these requirements?

A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch. Which feature should the customer implement at the switch level?

A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability. Which HPE server family meets the customer's needs?

A customer needs to know if the storage solution you proposed contains components that are compatible with existing products currently in the data center. Which HPE resource should you use to provide this information?

DRAG DROP A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch. Match the fan tray option with the airflow direction.

Which storage array feature duplicates all the data from one original base volume to another volume called the destination volume?

A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering implementing Kerberos network authentication in their environment. Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers?

A customer with a Microsoft server environment wants to consolidate their employee home directories and other company file shares presented from an appliance as a single name space. Which HPE product should you recommend to the customer?

A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASET Ethernet ports which need to be connected to the network. The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep the number of managed devices on the network to a minimum. Which architecture meets the customer requirements?

DRAG DROP Match the speed and protocol with the appropriate component.

Question 221

You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient temperature of 45 °C (113 °F).

Which additional option is required?

500W Flex Slot Platinum PS Kit

M.2 Solid State Enablement Kit

Gen10 Bezel Kit

High Performance Fan Kit

Show Answer Comment (0)

Question 222

You are installing additional components to a server.

Which HPE resource provides Quickspecs that verify the compatibility of the server hardware with the server?

iQuote Universal

Smart Selling tool

Product Bulletin

SPOCK

Show Answer Comment (0)

You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to install the firmware on the second switch.

What must you do to install the firmware on the second switch?

Perform a hot reset on the first switch to initiate the installation on the second switch

Reactivate the upgrade on the first switch before attempting to update the firmware on the second switch

Reinitialize the devices attached to the first switch before installing the firmware on the second switch

Perform a hot reset on the second switch after the first switch is activated

Show Answer Comment (0)

Question 224

Which HPE tool can securely erase current content of a server and help with consistent and easy operating system installation?

HPE System Insight Manager

HPE Intelligent Management Center (IMC)

HPE OneView

HPE Intelligent Provisioning

Show Answer Comment (0)

Question 225

You are installing a data center switch.

Which methods are recommended to configure the switch? (Choose two.)

Use out-of-band management with a dedicated management connection

Use in-band management with an IP address and subnet mask that is reachable on the management network

Use out-of-band management and keep the default settings

Use in-band management and configure the AUX0 interface for scheme authentication

Show Answer Comment (0)

Question 226

You are installing new drives into the internal cage of a HPE ProLiant DL380 server.

How is the drive device number set?

The Smart Array controller assigns the device number automatically based on the bay

HPE OneView uses the server profile to assign the device number

The operating system assigns the device number automatically based on the drive installation order

You must use Smart Storage Administrator to assign the device number

Show Answer Comment (0)

Question 227

A customer is planning an upgrade in their data center. The customer needs to deploy on bare-metal and virtual servers easily through a common interface. In addition, they have expressed an interest in software-defined storage.\ Which

HPE compute platform should you suggest?

SimpliVity

ProLiant DL servers

Synergy

BladeSystem

Show Answer Comment (0)