Home / HP / HPE6-A69

HP HPE6-A69 Practice Test - Questions Answers

Question list

List of questions

Question 1

(0)

Refer to the exhibit. Aruba CX 6300 switch has routes in three different VRFs as per the example above. The user needs to leak routes between VRF Secure and VRF Dev. and also between VRF default

Question 2

(0)

You have created an OSPF neighbor configuration with ArubaOS-CX 8320 VSX and a third-party switch The OSPF peering falls. In the event togs you see the following entries. 2020-10-28:03:14 20.371489

Question 3

(0)

When applying me following access-Iist to an ArubaOS-CX 6300 switch: How does this ACL behave on the selected switch? (Select two.)

Question 4

(0)

The customer is considering Implemented the following VSX configuration that will host an Aruba mobility cluster servicing 9000 dual stack employee devices. The client's default gateways will be ho

Question 5

(0)

(Scenarios may contain multiple errors which may or may not Impact the solution > Refer to the exhibit. An engineer has attempted to configure two pairs of switches in the referenced configura

Question 6

(0)

(Scenarios may contain multiple errors which may or may not impact the solution ) Refer to the exhibit. An engineer has attempted to configure two pairs of switches in the referenced configuratio

Question 7

(0)

(Scenarios may contain multiple errors which may or may not impact the solution) Refer to the Exhibit. An engineer has attempted to configure two pairs of switches m the referenced configuration

Question 8

(0)

An administrator is utilizing the orchestration capabilities of NetEdit. What are the two plan types that can be created'' (Select two.) Configuration management plan

Question 9

(0)

An administrator has identified a denial of service attack that is stressing the management processor on the switch. Which actions can be applied to CoPP to mitigate the issue? (Select two.)

Question 10

(0)

DRAG DROP Match the repotted status to the Aruba 8325 issue (Each option may Be used once more than once, or not at all)

Related questions

A customer wants to implement a new Aruba 6300M 48-port iGbE Class 4 PoE and d-port SFP56 Switch solution. The customer wants to automatically provision devices, connected to the switch with correct settings. VoIP phones need to be placed in VLAN 10, send out traffic with a VLAN tag. The phone is LLDP-MED capable How can you accomplish this with the least amount of administrative effort? A) B) C) D)

With the given topology, the customer Has ArubaOS-CX 6300 switches and Aruba Gateway in use. What is required for the client traffic to be tunneled as per best practice between the connected switch port and the Aruba Gateway'' (Select two.)

(Scenarios may contain multiple errors which may or may not impact the solution) Refer to the Exhibit. An engineer has attempted to configure two pairs of switches m the referenced configuration it Is required to implement Multi-Chassis Link Aggregation for each pair of switches The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows The configuration includes: There is an error message stating "mismatched group speed" What should you add to the configuration to correct the error?

Which statements are true with regards to Strict Priority scheduling? (Select two.)

The customer is considering Implemented the following VSX configuration that will host an Aruba mobility cluster servicing 9000 dual stack employee devices. The client's default gateways will be hosted on the VSX stack. The customer is seeking advice about how to ensure ArubaOS-CX VSX best practices have been applied. What advice can you offer the customer? (Select two)

Refer to the exhibit. Aruba CX 6300 switch has routes in three different VRFs as per the example above. The user needs to leak routes between VRF Secure and VRF Dev. and also between VRF default and VRF Dev The customer Is not able to establish routing between directly connected networks 10.100.50.0/24 and 10.102.26.0/24 Which statement is true regarding the routing troubleshooting?

Refer to the exhibit. • For all traffic within VLAN 10. a remark action or DSCP value EF must be set • For all traffic exiting VLAN 10, a remark action of DSCP value AF41 must be set Which is the correct configuration? A) B) C) D)

A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address What are the minimum steps that should be performed to mitigate this condition? (Select two.)

Company A and Company B are merging their BGP routed networks The companies have overlapping IP ranges and security concerns during the migration phase. Which Aruba CX 8325 functionality would help the merging of networks in a secure way?

Question 1

Refer to the exhibit.

Aruba CX 6300 switch has routes in three different VRFs as per the example above. The user needs to leak routes between VRF Secure and VRF Dev. and also between VRF default and VRF Dev The customer Is not able to establish routing between directly connected networks 10.100.50.0/24 and 10.102.26.0/24 Which statement is true regarding the routing troubleshooting?

Multi-protocol BGP routing needs to be defined for route leaking

Route Distinguisher needs to be set to 1 for default VRF.

Route leaking is supported between non-default VRFs only

Route leaking between default and non-default VRFs is supported with Aruba CX 8400.

Show Answer Comment (0)

Question 2

You have created an OSPF neighbor configuration with ArubaOS-CX 8320 VSX and a third-party switch The OSPF peering falls. In the event togs you see the following entries.

The ArubaOS-CX switch requires plain-text authentication with OSPF.

The third-party switch should be configured with MD5 authentication

The ArubaOS-CX switch does not expect authentication with OSPF.

The third-party switch should be configured with key chain authentication

Show Answer Comment (0)

Question 3

When applying me following access-Iist to an ArubaOS-CX 6300 switch:

How does this ACL behave on the selected switch? (Select two.)

The mp traffic to MANAGEMENT-SERVERS group is logged to me event logs

The tftp traffic to MANAGEMENT-SERVERS group is not logged to the event logs.

The snmp-trap traffic to MANAGEMENT-SERVERS is logged to the event togs.

The denied tcp traffic to the MANAGEMENT-SERVERS group is logged to event logs.

The denied tcp traffic to the MANAGEMENT-SERVERS group is not logged to event logs

Show Answer Comment (0)

Question 4

The customer is considering Implemented the following VSX configuration that will host an Aruba mobility cluster servicing 9000 dual stack employee devices.

The client's default gateways will be hosted on the VSX stack. The customer is seeking advice about how to ensure ArubaOS-CX VSX best practices have been applied.

What advice can you offer the customer? (Select two)

The ISL Bandwidth should be upgraded

Agg-1 and Agg-2's hardware forwarding table profile should be changed to "L3-agg''.

The -system-mac' of Agg-1 should be changed to an unused address from the unicast private address range

The vsx linkup-delay timer is unnecessarily high; it should be reduced to prevent excessive delay of packet forwarding when a VSX peer joins an existing master.

The Keepalive interface should be changed to interface LAG2 so there is redundancy through the mobility cluster.

The keepalive subnet is misconfigured, it has an inappropriate address on Agg-1.

Show Answer Comment (0)

Question 5

(Scenarios may contain multiple errors which may or may not Impact the solution > Refer to the exhibit.

An engineer has attempted to configure two pairs of switches in the referenced configuration it is required to implement VSX keep-alive at the aggregation layer.

The ports of the ArubaOS-CS 8325 switches used for Agg01 and Agg02 are populated as follows:

The configuration of switch AGG01 includes:

VSX keep-alive is not working. Which modification should you make lo resolve the error condition?

Edit interface 1/1/48, adding the command "vpn-instance KA"

Modify the Interface lag 2 command, removing "multi-chassis"

Modify the Keepalive peer 192.168.20.2 source 192 168.20.1 command, adding "vrf KA"

Edit the vsx-sync command, adding "keep-alive"

Show Answer Comment (0)

Question 6

(Scenarios may contain multiple errors which may or may not impact the solution ) Refer to the exhibit.

An engineer has attempted to configure two pairs of switches in the referenced configuration It is required to implement VSX at the aggregation layer The pons of the ArubaOS-CX 8325 switches used for Agg01 and Agg02 are populated as follows:

The configuration of switch AGG01 includes

The VSX cluster is not forming. Which modification should you make to resolve the error condition?

Modify the system interface-group 4 speed tOg command change "25g" to "10g"

Modify the keepalive peer 192.168 20.2 source 192 168.20 1 command, changing "vrf KA" to "vrf mgmt"

Edit the vsx-sync command, adding "keep-alive"

Modify the vsx definition, changing "inter-switch-link lag 2" to" inter-switch-link lag 256"

Show Answer Comment (0)

Question 7

(Scenarios may contain multiple errors which may or may not impact the solution) Refer to the Exhibit.

An engineer has attempted to configure two pairs of switches m the referenced configuration it Is required to implement Multi-Chassis Link Aggregation for each pair of switches The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows

The configuration includes:

There is an error message stating "mismatched group speed" What should you add to the configuration to correct the error?

"system Interface-group 1 speed I0g"

"allow-unsupported-transceiver

"speed 10-full" under interfaces 1/1/12 and 1/1/13

"speed 40-full" under interfaces 1/1/49 and 1/1/50

Show Answer Comment (0)

Question 8

An administrator is utilizing the orchestration capabilities of NetEdit. What are the two plan types that can be created'' (Select two.)

Configuration management plan

Firmware plan

Deployment plan

Configuration plan

Show Answer Comment (0)

Question 9

An administrator has identified a denial of service attack that is stressing the management processor on the switch. Which actions can be applied to CoPP to mitigate the issue? (Select two.)

Set the processing priority

Create a policy that matches the payload of GRE traffic.

Regulate traffic from the OOBM Ethernet port

Apply multiple active polices for the classes of traffic

Show Answer Comment (0)