Home / Microsoft / MB-320

Microsoft MB-320 Practice Test - Questions Answers, Page 17

Question list

List of questions

Question 161

(0)

You are a process engineer evaluating Lean vs. Discrete processing. You want to convert a Kanban item. The item has the following Lean setup: The setup uses a Lean schedule group with a throughput

Question 162

(0)

Note: This question-is part of series of questions that present the same scenario. Each question-in the series contains a unique solution that might meet the stated goals. Some question-sets might h

Question 163

(0)

Note: This question-is part of series of questions that present the same scenario. Each question-in the series contains a unique solution that might meet the stated goals. Some question-sets might h

Question 164

(0)

Note: This question-is part of series of questions that present the same scenario. Each question-in the series contains a unique solution that might meet the stated goals. Some question-sets might h

Question 165

(0)

You need to create the production orders for standard model bicycles. Which method should you use?

Question 166

(0)

You need to configure the bicycles' production resource. Which option should you use?

Question 167

(0)

A company uses cost groups to track calculated costs of items preassembled by vendors. The company needs to analyze service costs for each vendor's preassembled items. You need to assign the cost

Question 168

(0)

You are using the manufacturing execution module in Dynamics 365 Supply Chain Management. License plate labels must be printed for products in the Report as finished step. You need to use the manu

Question 169

(0)

A vendor plans to supply replacements for a product that they manufactured. The cost associated with manufacturing most components of the replacement product differ from costs associated with the o

Question 170

(0)

Note: This question-is part of series of questions that present the same scenario. Each question-in the series contains a unique solution that might meet the stated goals. Some question-sets might h

Related questions

DRAG DROP A skateboard manufacturer uses route operations to schedule resources and estimate units per hour. All products use the sample sub assembly item and resource sanding process. You observe an increase in the number of units a sanding belt resource can produce. The production schedule is now inaccurate due to the number of units the sanding belt line can produce. You must make a permanent change to the number of units the resource can produce for all future orders. You need to adjust the process quantity on the route operation. Which three actions should you perform in sequence? To answer, move the appropriate actions form the list of actions to the answer area and arrange them in the correct order.

You are responsible for product and formula maintenance for a paint manufacturer. You create a formula for white paint and add its lines. When the formula size increases or an ingredient changes, the quantity of the pigment ingredient must be adjusted proportionately. You need to set up the formula line for the pigment. Which formula feature should you use?

You produce 100 total units of finished goods. The amount of material used to produce the goods is the equivalent amount of material needed to produce 105 finished goods. The company must track variances in material compared to the original estimated amount. You must only use one picking list journal for each production order. You need to post a picking list that accounts for the material required to produce 105 finished goods. What should you do?

HOTSPOT You are the production scheduler for a manufacturing company. You have run the Resource Group Capacity report as shown in the Resource Group 21 Capacity exhibit. (Click the Resource Group 21 Capacity tab). After reviewing that report, you run Resource Capacity reports as shown in the Resource 2101 and 2102 Capacity exhibits. (Click the 2101 Capacity and 2102 Capacity tabs.) You run the Gantt chart report as shown in the Gantt exhibit to determine the production orders scheduled on the resources. (Click the Gantt tab.) You need to determine the method to schedule the production lines. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

You are responsible for training the operations staff on production transactions in Dynamics 365 Supply Chain Management. The company uses backflushing for material consumption principles. You need to train the operators on how to report unintended scrap. What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

SIMULATION You are a functional consultant for Contoso Entertainment System USA (USMF). You need to assign a cost of 1,000 US dollars to the night shift. To complete this task, sign in to Dynamics 365 portal. You must complete Task 1 before completing this task. Task 1 is the creation of a new cost category named NightShift for the night shift.

You are a process engineer evaluating Lean vs. Discrete processing. You want to convert a Kanban item. The item has the following Lean setup: The setup uses a Lean schedule group with a throughput ratio = 2. The process activity tied to production flow has the following runtime activity times: time = 3 min, per quantity = 1. The work cell capacity has a model type of Throughput and an average throughput quantity of 60 per a capacity period of standard workday (8-hour day). The throughput is 10 per hour. You need to set up a Discrete operation to mirror the item's production flow activity. What should you do?

A company is implementing Dynamics 365 Supply Chain Management in their manufacturing environment. The manufacturing process uses formulas to direct material consumption on the batch orders. During production some items in the formula must be consumed automatically from the production area, while some must be picked with their actual consumption reported on a pick list. You need to determine which setup method is used for formula lines to allow for the desired mixed method picking processes. What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

DRAG DROP You need to set up the system to calculate the overhead rates automatically for production. Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

A company implements manufacturing in Dynamics 365 Supply Chain Management. The company wants to efficiently produce products comprised of different order types. You need to select the appropriate production plan. Which production process should you use for the production run?

Question 161

You are a process engineer evaluating Lean vs. Discrete processing. You want to convert a Kanban item.

The item has the following Lean setup:

The setup uses a Lean schedule group with a throughput ratio = 2.

The process activity tied to production flow has the following runtime activity times: time = 3 min, per quantity = 1.

The work cell capacity has a model type of Throughput and an average throughput quantity of 60 per a capacity period of standard workday (8-hour day).

The throughput is 10 per hour.

You need to set up a Discrete operation to mirror the item's production flow activity.

What should you do?

Create a route with a runtime = 1, a process quantity = 6, and the operation's hours/time = 0.0167 (e.g. 1 hour/60 minutes)

Create a route with a runtime = 1, a process quantity = 10, and the operation's hours/time = 1

Create a route with a runtime = 1, a process quantity = 6, and the operation's hours/time = 1

Create a route with a runtime = 1, a process quantity = 1, and the operation's hours/time = 1

Show Answer Comment (0)

Note: This question-is part of series of questions that present the same scenario. Each question-in the series contains a unique solution that might meet the stated goals. Some question-sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question-in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. IngredientA is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient.

You need to ensure that the system is set up to support the manufacturing process.

Solution: Set up the IngredientB formula line as a phantom BOM.

Does the solution meet the goal?

Yes

Show Answer Comment (0)

Question 163

After you answer a question-in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

You need to ensure that the system is set up to support the manufacturing process.

Solution: Create a formula version for each concentration level.

Does the solution meet the goal?

Yes

Show Answer Comment (0)

Question 164

After you answer a question-in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

You need to ensure that the system is set up to support the manufacturing process.

Solution: Configure the catch weight of IngridientA to allow for the variances of the concentrations received from the different vendors.

Does the solution meet the goal?

Yes

Show Answer Comment (0)

Question 165

You need to create the production orders for standard model bicycles.

Which method should you use?

Sales order line

Master planning execution

Supply schedule form

Released item

All production orders form

Show Answer Comment (0)

Question 166

You need to configure the bicycles' production resource.

Which option should you use?

Exclusive capacity set to yes and enter a Batch capacity.

Exclusive capacity set to no and infinite capacity.

Exclusive capacity set to yes and infinite capacity.

Exclusive capacity set to no and enter a Batch capacity.

Show Answer Comment (0)

Question 167

A company uses cost groups to track calculated costs of items preassembled by vendors.

The company needs to analyze service costs for each vendor's preassembled items.

You need to assign the cost group type to the preassembled items.

Which costs should you assign?

Direct material

Indirect

Direct manufacturing

Direct outsourcing

Show Answer Comment (0)

Question 168

You are using the manufacturing execution module in Dynamics 365 Supply Chain Management.

License plate labels must be printed for products in the Report as finished step.

You need to use the manufacturing execution functionality that meets this requirement.

What should you use?

Job card device

Production waves

License plates

Operations schedules

Show Answer Comment (0)

Question 169

A vendor plans to supply replacements for a product that they manufactured.

The cost associated with manufacturing most components of the replacement product differ from costs associated with the original product.

You need to plan for the new cost of the item in determining the sales price.

Which costing version explosion mode should you use?

According to BOM line type

Multilevel

Single level

Make to Order

Show Answer Comment (0)

Question 170

After you answer a question-in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A manufacturing company has a new speaker that is available with standard and premium carbon fiber options.

For the premium option, speakers are made to order. Customers can choose from seven product attributes at different prices.

You need to create and configure the product and pricing for the new speaker.

Solution: Create a constraint-based product with configurations. Use a price model to calculate the different configurable option costs.

Does the solution meet the goal?

Yes

Show Answer Comment (0)

Total 203 questions

15 16 17 18 19

Go to page: of 21