Home / Microsoft / MB-335

Microsoft MB-335 Practice Test - Questions Answers, Page 5

Question list

List of questions

Question 41

(0)

You need to address the ignition switch issue. Which three actions should you perform? Each answer presents part of the solution. NOTE: Each correct selection is worth one point.

Question 42

(0)

A company produces homeopathic lotions for pain relief. The lotions use a combination of ProductA and ProductB. ProductA is the primary ingredient. You use Products to adjust the concentration of ac

Question 43

(0)

HOTSPOT A company makes engine parts used in the automotive industry. They are in the process of retooling an existing manufacturing plant. They are looking to use Dynamics 365 for Finance and Ope

Question 44

(0)

A company uses engineering change management in Dynamics 365 Supply Chain Management. The Product readiness checks feature is turned off. An existing engineering product must be reconfigured for a

Question 45

(0)

You are building the Bill of materials (BOM) for a new production item. The new item has a subcomponent. Subproduction orders for the subcomponent must be created when estimating production orders.

Question 46

(0)

HOTSPOT You are developing a new car audio system kit. The kit configuration has restrictions based on car model, speaker size, and other expression constraints. You need to set up a new item for

Question 47

(0)

DRAG DROP A company produces custom-made bicycles that offer many different configurations. Your standard bicycle, B-0001, is made with many common components such as a frame and wheels. Customers

Question 48

(0)

You work for a gem wholesaler that sells raw diamonds. Diamonds are purchased and sold in individual boxes but weighed and inventoried in carats. You are setting up a catch weight item for diamonds

Question 49

(0)

You are the production supervisor in charge of setting effective cost prices for the labor force in a manufacturing company. It is the end of the year and the labor rates have been recalculated bas

Question 50

(0)

HOTSPOT You are a manufacturing consultant helping a client test out different bill of material (BOM) and route consumption options when starting production orders. Material and labor consumption a

Related questions

DRAG DROP A company uses separate finished good item numbers for size variations of the same product. The company wants to minimize the number of variously-sized items that are created. You need to perform the setup to allow variants in size to the product master. Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

A company uses Dynamics 365 Supply Chain Management. Equipment installations in multiple regional locations require monthly maintenance. Two maintenance technicians have holiday time off scheduled this month. You need to ensure that all scheduled work orders are completed within the month around the holiday schedules. Which feature should you use?

You need to configure production control parameters for liquid cleaning solution manufacturing. What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

A manufacturer uses discreet orders and manually consumes raw material after reporting products as finished. You are performing an end-of-month closing for remaining picking lists on production orders. You must not be required to consume the full amount of material on production order picking lists as a result of improved production efficiency. When the production manager verifies that no material is left to consume, there are remaining back-ordered amounts. You need to pick the line item short and eliminate the remaining demand. What should you do?

A customer produces light projection toys for holiday decorations throughout the year. You are in the first month of a season. Production flows take one day to complete. The floor supervisor reports that seasonal production targets will not be met. You review the Kanban schedule board and identify thousands of unplanned jobs. You need to plan the jobs to be completed two weeks prior to the start of the next season. What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE; Each correct selection is worth one point.

DRAG DROP A manufacturer uses route operations and job scheduling. You use a unique calendar for a conveyor line. The company observes a decrease in the number of hours a conveyor line resource is operational due to breakdowns. You must make a temporary change to the number of hours the resource is available. You need to adjust the efficiency percentage for the conveyor line calendar. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

DRAG DROP A recreational vehicle (RV) manufacturing company is implement Dynamics 365 Supply Chain Management. All RVs are configured to order. Quality checks show that there is an issue with the sealant used with the windows in some of the RVs. You need to identify which RV models use the sealant and change the sealant item. Which function should you use for each requirement? To answer, drag the appropriate functions to the correct requirements. Each function may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

You need to set up the configuration model to price the motorcycles correctly. What should you do?

DRAG DROP A company uses Discrete manufacturing concepts to produce cables. The company's production scheduler uses internal documents to track issues on in-process production orders. The production scheduler must group all in-process production orders according to issues. The scheduler must be able to easily determine issues with production orders. You need to implement a method to easily identify production orders with issues. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

A manufacturing company uses master planning in Dynamics 365 Supply Chain Management. Purchase orders for a raw material are created more frequently than needed. This results in missed discounts with the vendor who sells the raw material. The raw material items have a 30-day lead time. The company is willing to delay sales and production order demand that may consume the raw material for up to 15 days to consolidate purchase orders. You need to configure the setup to include lead time and consolidate purchase orders. What should you configure?

Question 41

You need to address the ignition switch issue.

Which three actions should you perform? Each answer presents part of the solution.

NOTE: Each correct selection is worth one point.

Set product readiness to manual,

Copy link and products.

Define business impact.

Change product lifecycle state.

Set product readiness to automatic.

Show Answer Show Case Study Comment (0)

A company produces homeopathic lotions for pain relief. The lotions use a combination of ProductA and ProductB. ProductA is the primary ingredient. You use Products to adjust the concentration of active ingredients in the lotion. ProductC represents the remainder.

You need to ensure that the lotion final product has a consistent concentration of anti-inflammatory agents.

Which two actions should you perform? Each correct answer presents part of the solution.

NOTE: Each correct selection is worth one point.

Set the formula line type of ProductB to Active

Set the formula line type of ProductA to Compensating

Set the formula line type of ProductC to None

Set the formula line type of ProductA to Active.

Set the formula line type of ProductB to Compensating

Show Answer Comment (0)

Question 43

HOTSPOT

A company makes engine parts used in the automotive industry.

They are in the process of retooling an existing manufacturing plant. They are looking to use Dynamics 365 for Finance and Operations to help support the Bill of Materials (BOM) product lifecycle for engineering version control.

You must translate existing production processes into the proper elements. You need to create BOM lifecycle states to translate existing production processes into the proper elements.

What type of BOM product lifecycle state should you create? To answer, select the appropriate BOM state in the answer area.

Show Answer Comment (0)

Question 44

A company uses engineering change management in Dynamics 365 Supply Chain Management. The Product readiness checks feature is turned off.

An existing engineering product must be reconfigured for a new product readiness policy.

You need to change the product readiness policy.

Where should you make this change?

default order settings

shared product

engineering category

product configuration model

released product

Show Answer Comment (0)

Question 45

You are building the Bill of materials (BOM) for a new production item. The new item has a subcomponent.

Subproduction orders for the subcomponent must be created when estimating production orders.

You need to configure the BOM line to generate sub production orders.

Which BOM line type should you use?

Vendor

Item

Phantom

Pegged supply

Show Answer Comment (0)

Question 46

HOTSPOT

You are developing a new car audio system kit. The kit configuration has restrictions based on car model, speaker size, and other expression constraints.

You need to set up a new item for the car audio system.

How should you create the new product? To answer, select the appropriate option in the answer area.

NOTE: Each correct selection is worth one point.

Show Answer Comment (0)

Question 47

DRAG DROP

A company produces custom-made bicycles that offer many different configurations.

Your standard bicycle, B-0001, is made with many common components such as a frame and wheels. Customers can choose between two frames: F-0001 or F-0009. Wheel W-0001 is only compatible with frame F-0001.

You create the following configuration groups: Frames, Wheels

You need to ensure that users can only select valid combinations of frames and wheels.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

Assign the Frames and Wheels configuration..

Create a new Bill of materials version..

Add the Frames and Wheels configuration groups to the configuration route

Configure the two bicycle configurations

https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration

Show Answer Comment (0)

Question 48

You work for a gem wholesaler that sells raw diamonds. Diamonds are purchased and sold in individual boxes but weighed and inventoried in carats.

You are setting up a catch weight item for diamonds. Each box of diamonds must be tracked by its individual container weight.

You need to set up this item as a full visibility catch weight item.

Which two steps must you perform? Each correct answer presents part of the solution.

NOTE: Each correct selection is worth one point.

Assign the item a Tracking dimension group with active serial number control

Assign it a Serial number group with per qty. defined as 1.

Assign a Tracking dimension group with batch number as the only active tracking dimension.

Create an inter-class unit of measure conversion between boxes and carats.

Show Answer Comment (0)

Question 49

You are the production supervisor in charge of setting effective cost prices for the labor force in a manufacturing company.

It is the end of the year and the labor rates have been recalculated based on new salary data.

You need to update the effective labor costs for all labor groups.

Which element must be updated?

cost groups

cost category

resource group

shared category

production orders

Show Answer Comment (0)

Question 50

HOTSPOT

You are a manufacturing consultant helping a client test out different bill of material (BOM) and route consumption options when starting production orders. Material and labor consumption are to be completed before Report as finish.

You are running a production order with BOM lines that have a Flushing principle set to Start. The Automatic Route Consumption Runtime has been set to Yes.

You have set up the default Start user options for all production orders as shown in the exhibit below.

Show Answer Comment (0)

Total 152 questions

3 4 5 6 7

Go to page: of 16