CompTIA N10-008 Practice Test - Questions Answers, Page 66

A wireless survey is the first step that a network administrator should do before adding access points to the network. A wireless survey is a process of collecting data about the wireless environment, such as signal strength, channel usage, interference, and coverage. A wireless survey can help the network administrator to determine the optimal locations and configurations for the access points to provide the best possible coverage and performance for the wireless network. A wireless survey can also help to identify and troubleshoot any issues that may cause improper coverage in some areas. https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidelines-wlan-00.html

The fire suppression system is a design consideration when building out an IDF because it can affect the safety and reliability of the network equipment and cabling. A fire suppression system is a system that detects and extinguishes fires in a building, using water, gas, or chemicals. Depending on the type of fire suppression system, it can have different impacts on the IDF design, such as:

Water-based systems, such as sprinklers, can damage the network equipment and cabling if they are activated by a fire or a false alarm. Therefore, the IDF should be designed to protect the equipment and cabling from water exposure, such as using waterproof cabinets, drip pans, and conduits.

Gas-based systems, such as clean agent systems, can displace the oxygen in the IDF and cause suffocation for anyone inside. Therefore, the IDF should be designed to allow for ventilation and air circulation, as well as warning signs and alarms to alert anyone in the IDF before the gas is released.

Chemical-based systems, such as dry chemical systems, can leave a residue on the network equipment and cabling that can affect their performance and lifespan. Therefore, the IDF should be designed to minimize the contact between the chemical and the equipment and cabling, as well as provide a means for cleaning and restoring them after a fire.

The other options are not correct because:

The source panel amperage is not a design consideration when building out an IDF, as it is determined by the electrical circuit and the power needs of the network equipment and cabling. The source panel amperage does not affect the layout, location, or protection of the IDF.

The humidity levels are not a design consideration when building out an IDF, as they are controlled by the HVAC system and the ventilation of the IDF. The humidity levels do not affect the layout, location, or protection of the IDF.

The cable transmission speeds are not a design consideration when building out an IDF, as they are determined by the type and quality of the network cabling and the network equipment. The cable transmission speeds do not affect the layout, location, or protection of the IDF.

A /30 subnet is the smallest possible subnet that can be used for a point-to-point configuration between two routers. A /30 subnet has only two usable host addresses, one for each router, and a network address and a broadcast address. A /30 subnet conserves IP space by minimizing the number of wasted addresses. A /24, /26, or /28 subnet would have more usable host addresses than needed for a point-to-point configuration and would waste IP space.

Routing Technologies -- N10-008 CompTIA Network+ : 2.21

CompTIA Network+ Certification Exam Objectives, page 10

NS stands for Name Server, and it is a DNS record that specifies which servers are authoritative for a domain. The registrar is the entity that manages the domain registration and delegation, and it maintains the NS records for each domain. To change where the outside DNS records are hosted, the network administrator needs to change the NS records at the registrar to point to the new DNS servers that will host the outside DNS records.

DNS Record Types -- N10-008 CompTIA Network+ : 1.61

CompTIA Network+ N10-008 Cert Guide, page 1472

The syslog entries are indicative of link flapping, which is when a switch port rapidly transitions between the up and down states. This can cause intermittent connectivity issues, network instability, and increased CPU utilization on the switch. Link flapping can be caused by various factors, such as faulty cables, misconfigured interfaces, duplex mismatches, or network attacks. To troubleshoot link flapping, the technician should check the physical layer, verify the interface settings, and monitor the network traffic for anomalies.

What is Link Flapping?- CompTIA1

Troubleshooting Switch Port and Interface Problems - Cisco2

Network Troubleshooting - N10-008 CompTIA Network+ : 4.1 - YouTube3

Data center interconnect (DCI) is a solution that allows Layer 2 connectivity and data replication between geographically dispersed data centers. DCI can be implemented using various technologies, such as optical networks, MPLS, VPNs, or Ethernet. DCI can provide benefits such as improved disaster recovery, load balancing, resource pooling, and cloud services.

Data Center Interconnect - CompTIA Network+ N10-008 Domain 1.4 - YouTube1

CompTIA Network+ Certification Exam Objectives, page 92

Hub-and-spoke is a network topology where each node connects to a central switching device, such as a hub or a switch. All traffic between the nodes must pass through the central device, which acts as a single point of communication and control. Hub-and-spoke topology is simple, easy to manage, and cost-effective, but it also has drawbacks, such as low redundancy, high latency, and scalability issues.

Network Topologies -- N10-008 CompTIA Network+ : 1.21

CompTIA Network+ Certification Exam Objectives, page 92

A toner is a tool that generates an audible signal that can be traced by a probe. A network technician can use a toner to identify the appropriate patch panel port by connecting the toner to one end of the patch cord and using the probe to scan the patch panel until the signal is detected. A toner is the easiest way to identify the patch panel port when the patch panel is not labeled, as it does not require a laptop, a cable tester, or a visual fault locator. A toner can also be used to locate breaks or shorts in a cable, or to verify continuity.

Using a Toner and Probe - CompTIA Network+ Certification (N10-008): The Total CourseVideo

CompTIA Network+ Certification Exam Objectives, page 141

Subinterfaces are logical divisions of a physical interface that allow a router to communicate with multiple networks using a single LAN port. Subinterfaces can have different IP addresses, VLANs, and routing protocols. They are useful for reducing the number of physical interfaces and cables needed, as well as improving network performance and security.

Subinterfaces - CompTIA Network+ N10-008 Domain 1.21 - YouTube1

CompTIA Network+ Certification Exam Objectives, page 92