What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)

uses all available uplink bandwidth

maintains a single control plane

What is a design consideration when implementing FSPF?

Routes are based on the domain ID.

Routes are based on the distance vector protocol.

FSPF runs on a per-chassis basis.

Which two features are provided by deploying an OOB management network in a Cisco Nexus data center? (Choose two.)

Layer 2 path for server traffic

Layer 2 path for a vPC peer link

Layer 3 path for monitoring purposes

Layer 2 path for server traffic

Layer 2 path for a vPC peer link

Layer 3 path for vPC keepalive packets

Layer 3 path for server traffic

The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches.How is out-of-band management access provided for each VDC?

Each VDC has a unique out-of-band IP address from the same IP subnet.

All the VDC have the same out-of-band IP address.

Each VDC has a dedicated out-of-band Ethernet management port.

Each VDC has a unique out-of-band IP address from the same IP subnet.

Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.

Which two configurations allow for routing traffic between two VDCs? (Choose two.)

Connect the VDCs to an external Layer 3 device.

Create a policy map in the default VDC that routes traffic between the VDCs.

Connect the VDCs to an external Layer 3 device.

Cross-connect the ports between the VDCs.

Create VRF-aware software infrastructure interfaces.

Create a policy map in the default VDC that routes traffic between the VDCs.

Create interfaces in the VDC that can be accessed by another VDC.

What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)

Overlapping IP addresses are permitted on different VRFs.

Interfaces that belong to VRFs can be physical or logical.

Layer 3 interfaces can belong to multiple VRFs.

VRF-Lite interfaces can be Layer 2.

Overlapping IP addresses are permitted on different VRFs.

Interfaces that belong to VRFs can be physical or logical.

VRF-Lite interfaces support MPLS.

When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?

Layer 4 to Layer 7 device package

What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)

Layer 3 failures do not propagate beyond the OTV edge device.

It extends the spanning tree between data centers.

It propagates hosts reachability without support of traffic flooding.

Layer 3 failures do not propagate beyond the OTV edge device.

It extends the spanning tree between data centers.

It constrains HSRP hello messages to each data center.

An engineer is designing a Cisco Nexus 7000 Series disaster recovery site using the data center interconnect solution to provide gateway redundancy and needs to ensure that devices use gateways in their own data centers.Which design approach should be used to accomplish this goal?

FHRP localized to its own data center

CFS localized to its own data center

vPC localized to its own data center

FHRP localized to its own data center

STP localized to its own data center

Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects? (Choose two.)

STP runs on the uplink ports of each VLAN, as defined by PVSTP+.

The STP parameter configuration is unsupported.

STP runs on the uplink ports of each VLAN, as defined by PVSTP+.

STP runs on the uplink ports of each VLAN, as defined by MSTP.

The STP parameter configuration is unsupported.

The STP parameter configuration is supported.

Refer to the exhibit. A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel.What is the result of this policy?

Cisco UCS Manager creates two separate fabric port channels.

Cisco UCS Manager creates a single fabric port channel.

The port channel is disabled until an administrator enables it manually.

Each uplink that connects an IOM is configured as a discrete link.

What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?

Cisco Intersight automatically creates an invisible cloud witness.

Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios.

Cisco UCS Manager provides service profile portability across nodes.

Cisco HyperFlex Edge provides native container support through the KVM hypervisor.

Which approach splits a pair of clustered fabric interconnects into two standalone devices?

Unplug the Layer 1 and Layer 2 interfaces between the devices.

Run the disable fips-mode command on each fabric interconnect.

Run the connect local-management command on each fabric interconnect.

Erase the configuration of both fabric interconnects.

Unplug the Layer 1 and Layer 2 interfaces between the devices.

Refer to the exhibit. An engineer must assign multiple Fibre Channel IDs to a single port channel.Which two features must be enabled this goal? (Choose two.)

NPV feature on the Cisco MDS Series.

NPIV feature on the Cisco MDS Series

SAN Pin Groups on the Cisco UCS Fabric Interconnects.

NPV feature on the Cisco MDS Series.

end-host mode feature on the Cisco UCS Fabric Interconnects

NPIV feature on the Cisco MDS Series

Smart Zoning feature on the Cisco UCS Fabric Interconnects

Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?

8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.

8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.

8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.

8-Gbps links and 10-Gbps links use 8B/10B encoding.

8-Gbps links and 10-Gbps links use 64B/66B encoding.

Cisco 300-610 Practice Test 1 - Free Online Exam Prep & Questions

Question 1 / 40

What is an advantage of using OTV as compared to VPLS for data center redundancy?

prevents loops on point-to-point links

provides head-end replication

uses a proactive MAC advertisement

provides full-mesh connectivity

Comment (0)

Cisco 300-610 Practice Test 1

Question

Cisco 300-610 Practice Tests

Practice Tests