An engineer deploys VMware ESXi hypervisor on blade servers. The virtual networking is managed by Cisco Nexus 1000VSeries Switches.Which configuration aligns with Cisco recommended practices for providing high availability and a maximum throughput to the VMware ESXi hosts?

dual vNICs with LACP link aggregation

dual vNICs with static EtherChannel link aggregation

dual vNICs with hardware fabric failover on the fabric interconnects

dual vNICs with MAC pinning link aggregation

dual vNICs with LACP link aggregation

An engineer is operating data center environment that hosts data-intensive financial applications. The applications are mostly processing HTTP/HTTPS data with large data segments, which results in a CPU contention due to the significant network processing.Which set of the Ethernet adapter policies must be selected to resolve the issue?

Receive Checksum Offload field set to Enabled TCP Segmentation Offload field set to Disabled Transmit Queues field: 64 Ring Size field: 128

Receive Checksum Offload field set to Disabled TCP Segmentation Offload field set to Disabled Transmit Queues field: 32 Ring Size field: 256

Receive Checksum Offload field set to Enabled TCP Segmentation Offload field set to Disabled Transmit Queues field: 64 Ring Size field: 128

Receive Checksum Offload field set to Enabled TCP Segmentation Offload field set to Enabled Transmit Queues field: 128 Ring Size field: 64

Receive Checksum Offload field set to Disabled TCP Segmentation Offload field set to Enabled Transmit Queues field: 256 Ring Size field: 128

A network consultant proposes that the configuration of the Cisco UCS servers be based on service templates to facilitate the UCS infrastructure operation. The service profiles must remain connected to the template and be modified when the template settings are changed.Which configuration meets these requirements?

service profile template with type set to Updating

service profile with type set to Global

service profile with type set to Local

service profile template with type set to Updating

service profile template with type set to Initial

An engineer must integrate Layer 4 to Layer 7 services within Cisco ACI Fabric. The main requirement is to have a single point of configuration for network elements and firewall policies.Which action meets these requirements?

Define the service graph model as service policy mode.

Define the service graph model as network policy mode.

Deploy the firewalls in routed mode with PBR.

Deploy the firewalls in transparent mode.

Define the service graph model as service policy mode.

An engineer is building a data center network with VXLAN EVPN. The requirement is to use multicast for the broadcast, unknown unicast, and multicast replication.Which two VNI to multicast group mapping methods must be used to meet these requirements? (Choose two.)

many NVE to one multicast group

many VNI to one multicast group

many NVE to one multicast group

many VNI to one multicast group

one NVE to many multicast groups

many VNI to many multicast groups

An engineer must design a solution based on Cisco Nexus 7709 Switches. The solution must connect test and development network segments and separate the enterprise applications from the production network. The network security team requires routing instances and the IP stack to be completely separated from each other and for traffic between the environments to undergo a deep packet inspection.The development team also requests the ability to allocate additional physical interfaces from the Cisco Nexus 7709 device in each environment.Which solution meets these requirements?

1. Enable new routing instances for the testing and development environments in the same VDC.

1. Create a VRF for the testing and development environments.

Use ACLs to control traffic between the two environments.

1. Enable new routing instances for the testing and development environments in the same VDC.

Control reachability by using firewall access policies.

1. Assign a separate VDC for the testing and development environments.

Place a firewall between the VDCs.

1. Create a separate VRF for the testing and development environments.

Control reachability by using firewall access policies.

A customer connects a high-speed Fibre Channel storage array to a Cisco MDS 9000 Series Switch using an 8 Gbps interface.Which action guarantees line rate traffic processing on the interface?

Configure the interface rate mode as dedicated.

Set global buffering with B2B_credits for the interface.

Set local buffering with B2B_credits for the interface.

Configure the interface rate mode as dedicated.

Configure the interface rate mode as shared.

An engineer must design a Cisco HyperFlex solution to support a virtualized environment in a single data center location.The design must consider these customer requirements:a large-scale cluster with eight or more nodes distributed high-performance file system for virtualized servers high fault tolerance to multiple node failures Which action meets these objectives?

Implement a replication factor of four.

Configure data destaging and deduplication.

Implement a replication factor of four.

Enable logical availability zones.

Create multiple datastores for storage of VM.

A Cisco UCS chassis with several blade servers, a pair of IOMs, and a pair of Cisco UCS Fabric Interconnects are installed in a data center.Which two high-availability architectures are recommended between the IOMs and fabric interconnects? (Choose two.)

IOM is connected to the fabric interconnect that is acting as fabric A, and IOM B is connected to the fabric interconnect that is acting as fabric B.

Any combination of one to eight links are supported to be used between each IOM and fabric interconnect.

One, two, four and eight links are supported to be used between each IOM and fabric interconnect.

IOM is connected to the fabric interconnect that is acting as fabric A, and IOM B is connected to the fabric interconnect that is acting as fabric B.

Any combination of one to eight links are supported to be used between each IOM and fabric interconnect.

The IOMs are connected with multiple straight and cross-connect links toward a pair of nonclustered fabric interconnects.

Straight and cross-connect links should be used between the IOMs and fabric interconnects to offer higher availability.

A company needs a solution to virtualize their legacy desktop computers. The solution must be highly resilient and able to withstand the loss of a data center site. Each compute node requires a minimum of 20 disk drives.Which solution meets these requirements?

virtual desktop infrastructure solution installed in multiple data centers that are close to the end users solution based on Cisco HX240 compute nodes

thin client installed at each user's end station with a separate profile to retrieve sensitive data using the RDP protocol solution based on Cisco HX220 compute nodes

data center site with a strict security policy that provides access to users using a bespoke software client solution based on Cisco HX240 compute nodes

virtual desktop infrastructure solution installed in multiple data centers that are close to the end users solution based on Cisco HX240 compute nodes

dedicated virtual machine per hypervisors for each user in a centralized data center solution based on Cisco HX220 compute nodes

A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches. The Ethernet interconnection must use all redundant links and have no impact on the STP domain size.Which connectivity solution must be used?

Cisco UCS Fabric Interconnect in end host mode with dual uplinks distributed evenly to the upstream switches

Cisco UCS Fabric Interconnect in switch mode with dual uplinks distributed evenly to the upstream switches

Cisco UCS Fabric Interconnect in switch mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size

Cisco UCS Fabric Interconnect in end host mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size

Cisco UCS Fabric Interconnect in end host mode with dual uplinks distributed evenly to the upstream switches

An engineer must implement a WWPN pool for the vHBA template inside the Cisco UCS Manager. The template is used to connect a Cisco UCS B-Series blade to an external storage array.Which addressing sequence accomplishes this goal?

from 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF

from 192. 168.1.1 to 192.168.1.254

from iqn.2020-c41i4p21y5a165.lab.ucs-00 to iqn.2020-ceiD1pj5y135-8.lab.ucs-FF

from 00:0A:E6:3E:00:00 to 00:0A:E6:3E:00:FF

An engineer needs to configure multiple network devices using Ansible Device passwords must meet these requirements: be stored securely not be visible as plaintext be available to Ansible playbooks for executing scripts Which solution must the engineer choose?

Encrypt a password variable file using Ansible Vault.

Store the passwords within a Git repository Secrets Manager

Encrypt passwords as Ansible environment variables

Encrypt the passwords within the Ansible inventory file.

A network architect designs the iSCSI architecture. The requirements are to achieve high performance and a low amount of oversubscription and to minimize latency. Which two actions must be taken to meet these requirements? (Choose two.)

Configure the size of the payload in each frame to MTU 9000.

Enable iSCSI port binding on the Initiator device.

Configure the size of the payload in each frame to MTU 9000.

Minimize the number of hops between the storage and the hosts.

Enable iSCSI port binding on the Initiator device.

Set the size of the payload in each frame to MTU 1500.

Use a software-based iSCSI adapter on the client side.

The user traffic destined to all web servers located in the data center must pass first through a set of firewalls for deep packet inspection. A network architect must design the Cisco Intelligent Traffic Director (ITD) deployment that meets these requirements:The firewalls are connected to a set of two Cisco Nexus switches to provide stateful handling of traffic.The ITD service is provided for inside and outside segments of the firewall.Which ITD deployment mode must be implemented to meet these requirements?

server load-balancing deployment mode

Cisco 300-610 Practice Test 4 - Free Online Exam Prep & Questions

An engineer must implement an iSCSI storage connectivity in the existing Cisco UCS environment. The environment is based on Cisco UCS Ð¡-Series rack server, Cisco Nexus 1000V Series Switches, and VMware ESXi hosts. The implementation must meet these requirements:

Provide multipathing and high availability in the event of a critical path failure. Be cost-effective and not require the purchase of new equipment.

Which two components must be selected to meet these requirements? (Choose two.)

A.

software iSCSI adapter

B.

storage binding

C.

uplink pinning

D.

system VLAN

E.

hardware iSCSI NIC

Cisco 300-610 Practice Test 4

Question

Cisco 300-610 Practice Tests

Practice Tests