A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications.Which action should be implemented for the Fibre Channel traffic from the vHBA of this server to pass through the I/O Module in the Cisco UCS chassis to a specified uplink Fibre Channel port?

Update the applied Fibre Channel adapter policy.

Update the applied global QoS policy.

Update the applied Fibre Channel adapter policy.

Enable Persistent Binding in the vHBA policy.

Include a SAN pin group in the vHBA policy.

A network engineer is designing a Cisco Hyperflex infrastructure. The infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.Which storage connectivity method must be used to meet these requirements?

Internet Small Computer Systems Interface

An engineer installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-2208XP I/O modules. The full bandwidth of the I/O module must be utilized.Which two elements should be used in this environment? (Choose two.)

eight twinax cables from each I/O module to each fabric interconnect

four twinax cables from each I/O module to each fabric interconnect

eight twinax cables from each I/O module to each fabric interconnect

A customer needs to deploy a three-tier network architecture that will consist of web, app, and other business-critical applications. The solution will include Cisco UCS 6324 Fabric Interconnects managing B and C series servers. The fabric interconnects will be connected to the Cisco Nexus 7706 Series Switch for network access. A storage array will be directly connected to the UCS fabric interconnects.Which UCS deployment type must be used to meet these requirements?A. UCS interconnect in Ethernet switching modeUCS interconnect in Fibre Channel switching modeFabric Interconnects uplinked to the Nexus device using an LACP port-channel in passive mode

UCS interconnect in Ethernet end-host modeUCS interconnect in Fibre Channel end-host modeFabric Interconnects uplinked to the Nexus device using an LACP port-channel in passive mode

UCS interconnect in Ethernet end-host modeUCS interconnect in Fibre Channel switching modeFabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode

UCS interconnect in Ethernet switching modeUCS interconnect in Fibre Channel end-host modeFabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode

An engineer designs a Cisco UCS solution that must provide guaranteed and deterministic bandwidth to a specific server in the environment. The solution must apply to network and storage traffic of C-Series and B-Series servers.Which solution should be included to meet these requirements?

Pin the server ports of the service profile to dedicated uplink ports.

Pin the vNICs and the vHBAs of the service profile to dedicated uplink ports.

Pin the IOM ports of the service profile to dedicated server ports.

Pin the server ports of the service profile to dedicated uplink ports.

Pin the vNICs and vHBAs of the service profile to dedicated server ports.

What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?

reduction in application performance

Where does Cisco UCS handle Fibre Channel traffic failover?

on the host, by using multipathing software

on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode

on the host, by using multipathing software

in the hardware on the Cisco UCS VIC 12xx adapter or later

in the hardware on any Cisco UCS VIC adapter

What influences the number of ISLs that are required between Cisco MDS Series switches?

end-to-end oversubscription ratio

Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?

Ethernet and unified ports on the same port channel

Which two configuration methods can be used to deploy QoS to Cisco MDS Series switches? (Choose two.)

multiple QoS policies that match individual devices

multiple QoS policies that match multiple devices

An engineer is designing a data center that uses FCIP.How is QoS configured in this environment?

Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.

A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP frames in the data connection.

A separate DSCP value must be configured for all FCIP VSAN traffic.

A separate DSCP value and priority queuing must be configured for all FCIP traffic.

Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.

Which two methods mitigate congestion in a SAN network? (Choose two.)

Use the port-monitor command to detect slow drain devices.

Configure the port monitor to allow categorization of a specific device as slow.

Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.

Use the port-monitor command to detect slow drain devices.

Configure the port channel to enable individual buffer-to-buffer credits.

Configure the port monitor to allow categorization of a specific device as slow.

Configure the flow control for the FC to use R_RDY.

A storage engineer requires a solution that achieves multiple paths between a server and storage array. The design must support complete traffic isolation and support a 50% growth in the next year.Which FCoE solution meets these requirements?

at least two VSANs across the fabric

single switch with multiple links

at least two VSANs across the fabric

at least two FC zone sets with multiple zones

A network architect designs a high-availability architecture for the Cisco UCS Fabric Interconnects that are installed in a data center. The architecture must support clustering and redundancy.Which architecture meets these requirements?

dual connections from port L1 to L1 and one connection from port L2 to L2 with Ethernet cables

dual connections from port L1 to L1 and one connection from port L1 to L1 with twinax cables

dual connections from port L1 to L2 and one connection from port L2 to L1 with twinax cables

dual connections from port L1 to L2 and one connection from port L2 to L1 with Ethernet cables

dual connections from port L1 to L1 and one connection from port L2 to L2 with Ethernet cables

Which two automation requirements can be met by using Puppet? (Choose two.)

Push configuration updates immediately to servers.

Enable clients to pull changes to configuration files.

Push configuration updates immediately to servers.

Enable clients to pull changes to configuration files.

Enable clients to pull changes without installing an agent.

Provide support for writing new modules in Python.

Enable one-off infrastructure changes to be performed manually.

Which orchestration tool should be used for the management and analytics of servers across multiple sites?

Cisco Data Center Network Manager

Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?

Cisco Data Center Network Manager

What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)

It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.

It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.

It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.

It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.

It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.

It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer.

It operates at the customer-facing services layer and provides the management interface for the virtual network devices.

Cisco 300-610 Practice Test 2 - Free Online Exam Prep & Questions

Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?

HyperFlex Edge support

encryption offload cards

dedicated compute nodes

fabric interconnects

Comment (0)

Cisco 300-610 Practice Test 2

Question

Cisco 300-610 Practice Tests

Practice Tests