Which two automation requirements are met when Puppet is used? (Choose two.)

Enable clients to pull changes without installing an agent.

Immediately push configuration updates to servers.

Enable clients to pull changes without installing an agent.

Enable clients to pull changes to configuration files.

Enable one-off infrastructure changes to be performed manually.

Immediately push configuration updates to servers.

Provide support for writing new modules in Python.

An engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including Cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure.Which tool meets these requirements?

Cisco Data Center Network Manager

A cloud service provider is managing day-2 operations of over 200 blade servers installed in the Cisco UCS environment. This pool of network resources is providing virtual networks to their customers. To successfully operate this environment, frequent changes to vNICs and other operational policies are required across multiple UCS domains. The operations team must streamline these repetitive tasks. Which orchestration tool must be used to meet this requirement?

Cisco ACI Multisite Orchestrator

A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?

Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.

Reserve bandwidth for FCoE VLAN on the port-channel interface connected with storage.

Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.

Increase the queuing buffer in the port-channel interface connected to the storage array.Add an additional FCoE VLAN to the SAN network.

Add an additional FCoE VLAN to the SAN network.

The end users report issues with datastore reachability between the newly installed virtual machines (VMs) and the storage array. The VMs are deployed on a Cisco C-Series server, directly connected with Cisco Nexus 5672UP switches over FCoE VLAN. The data traffic on VLAN 99, which is designated as a native VLAN, reaches its default gateway, but FCoE VLAN 99 fails to access the datastore. Which action resolves the problem?

Configure the FCoE VLAN in the VSAN database before including it in the trunk port.

Implement FCoE traffic on VLAN 10 and data traffic on VLAN 99.

Implement host-facing FCoE ports as spanning-tree port type edge.

Configure the FCoE VLAN in the VSAN database before including it in the trunk port.

Configure the FCoE VLAN traffic on a separate interface from any other VLANs that traverse the network.

A network administrator must create a redundant vHBA for the mission-critical virtual machines (VMs) installed on a Cisco UCS Fabric Interconnect blade server. The VMs access multiple datastores using VSAN55 and VSAN95. The datastore on which the VMs are hosted must be accessible if any of the uplinks goes offline. Which action meets these requirements?

Assign VSAN55 and VSAN95 to vHBA1 and vHBA2.

Attach VSAN55 to vHBA1 and VSAN95 to vHBA2.

Assign VSAN55 and VSAN95 to vHBA1 and vHBA2.

Enable failover for the vHBA with VSAN55 and VSAN95 enabled.

Configure load-balancing for vHBAs with VSAN55 and VSAN95 attached.

A cloud service provider provisioned four active/active data centers in various locations within the country at 50 miles between each data center. The data centers must provide redundant network infrastructure and always be available to customers.Which two data center design steps must be used to meet these requirements? (Choose two.)

Provide application hosting services to customers from the closest data center.

Configure application data replication to all backup data centers.

Provide application hosting services to customers from the closest data center.

Implement active cluster in data centers 1 and 2 and backup in 3 and 4.

Use asynchronous replication between data centers 1 and 2.

Deploy database services in data center 1 and application layer to other data centers.

Configure application data replication to all backup data centers.

Refer to the exhibit. Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch.The requirements are to redesign the storage network and keep these considerations in mind:The traffic from each of the server must be redundant and isolated.The design must tolerate hardware and software failures and upgrades of SAN fabric devices.Which action must be taken to meet these requirements?

Place an additional Fibre Channel switch to create two physically independent storage fabrics.

Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.

Create a SAN port channel that faces the storage device to sustain a link failure.

Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.

Place an additional Fibre Channel switch to create two physically independent storage fabrics.

A storage administrator receives reports of network delays when database software attempts to access the storage array.The virtual machines that host the database software are installed on different rack servers connected to the Cisco UCSFabric Interconnect domain. The existing SAN switches are connected to the Fabric Interconnects using two 8 Gb portchannel interfaces to connect the storage array.The storage administrator has decided to deploy iSCSI storage with four 10 Gbps interfaces connected to the Cisco UCSFabric Interconnects.Which deployment type resolves the problems with storage contention?

iSCSI storage appliance on Cisco UCS Fabric Interconnect uplink trunk port

iSCSI storage with Cisco UCS Fabric Interconnect in the virtual port-channel mode

iSCSI storage with Cisco UCS Fabric Interconnect using an appliance port

iSCSI storage appliance on Cisco UCS Fabric Interconnect uplink trunk port

iSCSI storage appliance on Cisco UCS Fabric Interconnect in the storage end-host mode

An end user is experiencing network latency when accessing a database in a disaster recovery site. The monitoring team concluded that the database was writing simultaneously to the storage arrays on the primary and disaster recovery sites.Which design resolves this issue?

asynchronous replication between data centers

synchronous replication between data centers

FCoE tunnel between data center

FCIP tunneling between data center

Refer to the exhibit. A customer must ensure that the interface on a switch has enough resources to sustain the line rate traffic during peak load.Which action meets this requirement?

Change the rate mode to dedicated.

Increase the data field size to 9000 bytes.

Cisco 300-610 Practice Test 3 - Free Online Exam Prep & Questions

Question 1 / 40

An engineer manages hundreds of Cisco Nexus 3000 Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive library support, and is object-oriented.

Which automation tool should be used to meet these requirements?

Python

Bash

Perl

YAML

Comment (0)

Cisco 300-610 Practice Test 3

Question

Cisco 300-610 Practice Tests

Practice Tests