Refer to the exhibit: Export statistics received do not include the BGP next hop.Which statement about the NetFlow export statistics is true?

To include the BGP next hop in the export statistics, those keywords must be included with the version 9 entry.

Only the origin AS of the source router will be included in the export statistics.

Loopback 0 must be participating in BGP for it to be included in the export statistics.

The origin AS and the peer-as will be included in the export statistics.

To include the BGP next hop in the export statistics, those keywords must be included with the version 9 entry.

Which statement about segment routing prefix segments is true?

It is linked to a prefix SID that is globally unique within segment routing domain.

It is the longest path to a node.

It is linked to an adjacency SID that is globally unique within the router.

It requires using EIGRP to operate.

Which statement about Network Services Orchestrator (NSO) is true?

It uses YANG modeling language to automate devices

It is used only in service provider environments

It can be used only with XML coding

It uses YANG modeling language to automate devices

It must use SDN as an overlay for addressing

Which task must be performed first to Implement BFD in an IS-IS environment?

Configure BFD in an interface configuration mode

Disable Cisco Express Forward.ng on all interfaces running routing protocols other than IS-IS

Configure BFD under the IS-IS process

Configure all ISIS routers as Level 2 devices

Configure BFD in an interface configuration mode

An engineer working for telecommunication company with an employee id: 3715 15 021 needs to secure the LAN network using a prefix list Which best practice should the engineer follow when he implements a prefix list?

An engineer must use non sequential sequence numbers in the prefix list so that he can insert additional entries later.

The final entry in a prefix list must be /32

An engineer must identity the prefix list with a number only

An engineer must include only the prefixes for which he needs to log activity.

Refer to the exhibit: A network operator working for service provider with an employee id 3715 15:021 applied this configuration to a router.Which additional step should the engineer use to enable LDP?

Enable MPLS LDP on the interface

Disable Cisco Express Forwarding globally

Enable MPLS LDP on the interface

Configure the both keyword to enable LDP globally

Which statement describes the advantage of a Multi-Layer control plane?

It supports dynamic wavelength restoration in Layer 0

It automatically provisions monitors, and manages traffic across Layer 0 to Layer 3

It minimizes human error configuring converged networks

It supports dynamic wavelength restoration in Layer 0

It provides multivendor configuration capabilities for Layer 3 to Layer 1

Refer to the exhibit: Which statement about the status of the neighbor relationship between R1 and R2 is true?

The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area

The neighbor relationship is down because the two routers are configured with different area types

The neighbor relationship is down because the two routers are in the same subnet.

The neighbor relationship is up because R2 is level 1 and level 2 router.

The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area

Refer to the exhibit: A network engineer is implementing a BGP protocol. Which effect of the local-as keyword in this configuration is true?

It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 without additional configuration.

It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 and the VPNv4 address family

It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 without additional configuration

It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 and the VPNv4 address family

It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 without additional configuration.

Refer to the exhibit: Which condition must be met by the OSPF peer of router R1 before the two devices can establish communication?

The interface on the OSPF peer must use the same key ID and key value as the configured interface

The interface on the OSPF peer may have a different key ID, but it must use the same key value as the configured interface

The OSPF peer must be configured as an OSPF stub router

The OSPF peer must use clear-text authentication

Refer to the exhibit: Which statement about the neighbor statements for 192.168.1.1 is true?

The router sends BGP labels for its prefixes to this peer

The router must have TDP configured for the send-label command to operate

The neighbor router receives at least four labels from this router

The router sends BGP labels for its prefixes to this peer

The router sends only a label for the prefix for LoopbackO.

Refer to the exhibit: When implementing an LDP protocol, an engineer experienced an issue between two directly connected routers and noticed that no LDP neighbor exists for 1.1.1.1.Which factor should be the reason for this situation?

LDP needs to be enabled on the R2 physical interface

R2 does not see any hellos from R1

LDP needs to be enabled on the R2 loopback interface

R2 sees the wrong type of hellos from R1

What are the two uses of the YANG data modeling language? (Choose two.)

It Is used to model the configuration used by NETCONF operations.

It is used to shape state data of network elements.

It is used to access a device by HTTP.

It Is used to model the configuration used by NETCONF operations.

It is used to shape state data of network elements.

It Is used to replace RESTCONF as a mechanism to install and manipulate configuration.

It is used to replace the OSI model for troubleshooting.

How can shared services in an MPLS Layer 3 VPN provide Internet access to the customers of a central service provider?

The customer VRF uses route targets to import and export routes to and from a shared services VRF

The CE router can establish a BGP peering to a PE router and use the PE device to reach the Internet

Route distinguishes are used to identify the routes that CEs can use to reach the Internet

The customer VRF uses route targets to import and export routes to and from a shared services VRF

Static routes on CE routers allow route leakage from a PE global routing table

How can a network administrator secure rest APIs?

They can authenticate user sessions and provide the appropriate privilege level

They can allow read and write privileges to all users

They can ensure that user sessions are authenticated using TACACS+ only

They can have a general administrator login for multiple users to access that has command entries logged

They can authenticate user sessions and provide the appropriate privilege level

Refer to the exhibit. A network engineer is configuring customer edge routers to finalize a L2VPN over MPLS deployment Assume that the AToM L2VPN service that connects the two CEs is configured correctly on the service provider network Which action causes the solution to fail?

The routing protocol network types are not compatible

A loopback with a /32 IP address has not been used

OSPF does not work with L2VPN services

The xconnect statement has not been defined

The routing protocol network types are not compatible

After you analyze your network environment, you decide to implement a full separation model for Internet access and MPLS L3VPN services For which reason do you make this decision?

It enables you to choose whether to separate or centralize each individual service.

It is easier to manage a system in which services are mixed

It requires only one edge router

It enables EGP and IGP to operate independently

Refer to the exhibit: An engineer is preparing to implement data plane security configuration.Which statement about this configuration is true?

Router 1 is the trigger router in a RTBH implementation.

Router 2 must configure a route to null 0 for network 192 168.1 0/24 for the RTBH implementation to be complete.

Router 1 is the trigger router in a RTBH implementation.

Router 1 must be configured with uRPF for the RTBH implementation to be effective.

Router 2 is the router receiving the DDoS attack

Refer to the exhibits: R1 and R2 are directly connected and IS-IS routing has been enabled between R1 and R2 R1 message periodically Based on this output, which statement is true?

IS-IS neighbor authentication is failing for Level 1 PDUs only

IS-IS neighbor authentication is failing for Level 2 first and then for Level 1 PDUs

1S-1S neighbor authentication is failing for Level 1 and Level 2 PDUs .

IS-IS neighbor authentication is failing for Level 1 PDUs only

IS-IS neighbor authentication is failing for Level 2 PDUs only.

While implementing TTL security, you issue the PE(config-router-af)#neighbor 2.2.2.2 ttl-security hops 2 command.After you issue this command, which BGP packets does the PE accept?

from 2.2.2.2, with a TTL ol 253 Of more

from 2.2.2.2, with a TTL of less than 2

to 2.2.2.2, with a TTL of less than 253

to 2.2.2.2, with a TTL of 2 or more

Refer to the exhibit: This configuration is being applied on an IOS XR router.Which statement about this configuration is true?

It is used to create a streaming subscription with a 60-second interval

It is used to set up configuration to poll network data

It is used to create a streaming subscription with a 60-second interval

It is used to create a streaming subscription with a 600-second interval

What do Ansible and Salt Stack have in common?

They both can be designed with more than one master server

They both use DSL configuration language

They both use YAML configuration language

They both have agents running on the client machine

They both can be designed with more than one master server

Refer to the exhibit: What is the effect of this configuration?

The two routers fail to form a neighbor relationship because they have different ISIS area types.

The two routers fail to form a neighbor relationship because their system IDs are different.

The two routers successfully form a neighbor relationship

The two routers fail to form a neighbor relationship because the authentication configuration is missing

The two routers fail to form a neighbor relationship because they have different ISIS area types.

Refer to the exhibit: What does this value mean when it is received in XML?

It shows the ending of the script

It indicates a break in a sequence

It indicates a value assigned by a network administrator to tag a route

Refer to the exhibit: Which effect of this configuration is true?

It enables AToM on interface gigabitethemet1/0

it creates a pseudowire class named Cisco

It enables tagging for VLAN 12 on the interface

It enables MPLS on the interface

It enables AToM on interface gigabitethemet1/0

Refer to the exhibit: Which command is used to complete this configuration for QoS class-based marking?

PE-A(config-pmap-c)#set dscp ef

PE-A(config-pmap-c)#random-detect

Cisco 350-501 Practice Test 1 - Free Online Exam Questions 1-40

Question 1 / 40

Egress PE NAT is being used via a single centralized router to provide Internet access to L3VPN customers.

Which description of the NAT operation is true?

Users m different VRFs cannot share the same outside global IP address

The NAT table contains a field to identify the inside VRF of a translation

Multiple address pools are needed for the same L3VPN because each site has a separate NAT

The different L3VPNs using the Internet access must not have IP overlaps internally

Comment (0)

Cisco 350-501 Practice Test 1

Question

Cisco 350-501 Practice Tests

Practice Tests