How does an administrator make Cisco IP phone display the last 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?

Change the service parameter Apply Transformations On Remote Number to True.

Configure a calling party transformation pattern that keeps only last 10 digits.

Configure a translation pattern that has a calling Party Transform Mask of XXXXXXXXXX.

On the inbound SIP trunk, change Significant Digits to 10.

Change the service parameter Apply Transformations On Remote Number to True.

Multiple route patterns match a number. How does Cisco Unified Communications Manager determine which pattern to use?

the one that discards everything PreDot

the one that comes first in numerical order

A user forwards a corporate number to an international number. What are two methods to prevent this forwarded call? (Choose two.)

Configure a Forced Authorization Code on the international route pattern.

Set call forward All CSS to restrict international dial patterns.

Configure all forced code on all router.

Block international dial patterns in the SIP trunk CSS.

Configure a Forced Authorization Code on the international route pattern.

Set the call Classification to OnNet for the international route pattern.

Set call forward All CSS to restrict international dial patterns.

An administrator recently upgraded a Cisco Webex DX80 through its web interface but discovered the next morning that the unit had reverted to its previous version. What must the administrator do to prevent this from happening again?

Confirm the phone load name in the phone configuration.

Set the prepare cluster for rollback to pre-8.0 enterprise parameter to true.

Assign a universal device template to the phone.

Assign a phone security profile with secure SIP.

When a phone is registered over Mobile and Remote Access, where does it register?

Cisco Unified Communications Manager

A network administrator deleted a user from the LDAP directory of a company. The end user shows as Inactive LDAP Synchronize User in Cisco Unified Communications Manager. Which step is next to remove this user from Cisco UnifiedCommunications Manager?

Wait 24 hours for the garbage collector to remove the user.

Restart the Dirsync service after the user is deleted from LDAP directory.

Delete the user directly from Cisco Unified Communications Manager.

Wait 24 hours for the garbage collector to remove the user.

Execute a manual sync to refresh the local databased and delete the end user.

Which description of the Mobile and Remote Access feature is true?

Collaboration Edge feature that enables remote individuals to access enterprise collaboration services via Jabber without the use of a VPN connection

Collaboration Edge feature that enables remote individuals to perform international calls from Jabber with a VPN connection

Collaboration Edge feature that enables remote individual to access enterprise collaboration services via Jabber with the use of a VPN connection

Collaboration Edge feature that enables remote individuals to access enterprise collaboration services via Jabber without the use of a VPN connection

Collaboration Edge feature that enables remote individuals to access all enterprise collaboration services using a PC within the corporate environment

What causes poor voice quality and video pixelization in a video call?

The QoS is configured incorrectly.

Cisco Unified Communications Manager is configured to use G.711 instead G.729.

1 Gbps network ports are used instead of 100 Mbps network ports.

The QoS is configured incorrectly.

A firewall is blocking the RTP ports.

A presence redundancy group is deployed, and an engineer with ID012345678 initiates a Manager fallback. Which statement about Cisco server Recovery Manager is true?

disconnects all users that had been failed over, and the users must log in again

restart the Cisco Presence Engine

disconnects all user that had been failed over

restarts critical services on the secondary node

disconnects all users that had been failed over, and the users must log in again

Which statement describes the outcome when the trust boundary is defined at the Cisco IP phone?

Packets of Ethernet frames are not remarked at the access layer switch.

Packets or Ethernet frames are not remarked by the IP phone.

Packets or Ethernet frames are remarked at the distribution layer switch.

Packets of Ethernet frames are remarked at the access layer switch.

Packets of Ethernet frames are not remarked at the access layer switch.

An engineer is notified that the Cisco TelePresence MX800 that is registered in Cisco Unified communications Manager shows an empty panel, and the Touch 10 shows a corresponding icon with no action when pressed. Where does the engineer go to remove the inactive custom panel?

The In-Room control Editor on the webpage of the MX800

The phone configuration page in CUCM Administration

The SIP Trunk security profile page in CUCM Administration

The software Upgrades page in CUCM OS Administration

The In-Room control Editor on the webpage of the MX800

Which action prevent toll fraud in Cisco Unified Communications Manager?

Configure ad hoc conference restriction.

Implement toll fraud restriction in the Cisco IOS router.

Allow off-net to off-net transfers.

Implement route patterns in Cisco Unified CM.

Refer to the exhibit. What is a possible cause of the PRI issue?

The framing is configured incorrectly

Which issue cause slips on a PRI?

incorrectly configured time zone.

What is the major difference between the two possible Cisco IM and presence high-availability modes?

Balanced mode provides user load balancing and user failover in the event of an outage.Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.

Balanced mode provides user load balancing and user failover only for manually generated failovers. Active/standby made provides an unconfigured standby node in the event of an outage, but it does not provide load balancing.

Balanced mode provides user load balancing and user failover in the event of an outage.Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.

Balanced mode does not provide user load balancing, but it provides user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, but is does not provide load balancing.

Balanced mode provides user load failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, and is also provides load balancing.

Which two DNS records must be created to configure Service Discovery for on-premises Jabber?(Choose two.)

_cuplogin._tcp.cisco.com pointing to a record of IM&P

_cisco-uds._tcp.cisco.com pointing to a record of Cisco Unified CM

_cuplogin._tcp.cisco.com pointing to a record of IM&P

_cisco-uds._tcp.cisco.com pointing to a record of Cisco Unified CM

_cuplogin._tls.cisco.com pointing to the IP address of IM&P

_cisco-uds._tls.cisco.com pointing to the IP address of Cisco Unified Communications manager

_xmpp._tls.cisco.com pointing to a record of IM&P

An engineer implements QoS in the enterprise network. Which command can to verify the correct classification and marking on a cisco IOS switch?

show policy-map interface GigabitEthernet 1/0/1

show class-map interface GigabitEthernet 1/0/1

show policy-map interface GigabitEthernet 1/0/1

Which filed is configured to change the caller ID information on a SIP route pattern?

Calling party Transformation Mask

Called party Transformation Mask

Which filed id configured to change the caller ID information on a SIP route pattern?

Calling party transformation Mask

Called party Transformation Mask

Refer to the exhibit. The translation rule is configured on the voice gateway to translate DNIS. What is the outcome if the gateway receives 0255-343-1234 as DNIS?

The translation rule is matched and the translated number is 02553431234.

The translation rule is not matched because DNIS does not end with a "$".

The translation rule is matched and the translated number is 02553431234.

The translation rule is not matched because DNIS contains "-".

The translation rule is matched and the translated number is 025553431234.

Which action is required if an engineer wants to have Cisco Unified Communications Manager configuration for an MGCP gateway?

Apply the ccm-manager configuration commands to the gateway.

Upload the custom configuration in the TFTP server in cisco Unified CM.

Configure the Cisco Unified CM's IP in voice service VoIP.

Apply the ccm-manager configuration commands to the gateway.

From Cisco Unified CM >Device > Gateway > Add gateway, check the auto-configuration check box.

Which two functionalities does Cisco Expressway provide in the Cisco collaboration architecture?(Choose two.)

Secure firewall and NAT traversal for mobile or remote Cisco Jabber and TelePresence video endpoints

Secure business-to-business communications

Survivable Remote site Telephony functionality

Secure firewall and NAT traversal for mobile or remote Cisco Jabber and TelePresence video endpoints

Customer interaction management services

Secure business-to-business communications

Which Cisco Unified Communications Manager service parameter should be enabled to disconnect a multiparty call when the call initiator hangs up?

Block OffNet to OffNet Transfer

Enterprise Feature Access code for conference

Which description of the function of call handlers in Cisco Unity Connection is true?

They answer calls, take message, and provide menus of options.

They control outgoing calls by allowing you to specify the numbers that Cisco Unity Connection can dial to transfer calls, notify users of massages, and delivery faxes.

They collect information from callers by playing a series of questions and recording the answers.

They answer calls, take message, and provide menus of options.

They provide access to a corporate directory by playing an audio list that users and outside callers users and leave messages.

An engineer with ID012345678 must build an international dial plan in Cisco Unified Communications Manager. Which action should be taken when building a variable -length route pattern?

Create a second route pattern followed by the # wildcard

Configure single route pattern for international calls

Reduce the T302 timer to less than 4 seconds

Create a second route pattern followed by the # wildcard

Set up all international route pattern to 0.1

Cisco 350-801 Practice Test 1 - Free Online Exam Prep & Questions

An administrator is trying to change the default LINECODE for a voice ISDN T1 PRI. Which command makes the change?

linecode ami

linecode hdb3

linecode b8zs

linecode esf

Comment (0)

Cisco 350-801 Practice Test 1

Question

Cisco 350-801 Practice Tests

Practice Tests