A company wants to provide remote users with access to its on-premises Cisco collaboration features. Which components are required to enable Cisco Mobile and Remote Access for the users?

Cisco Expressway-E, Cisco Expressway-C, and Cisco UCM

Cisco Unified Border Element, Cisco IM and Presence Server, and Cisco Video Communication Server

Cisco Unified Border Element, Cisco UCM, and Cisco Video Communication Server

Cisco Expressway-E, Cisco Expressway-C, and Cisco UCM

Cisco Expressway-E, Cisco IM and Presence Server, and Cisco Video Communication Server

Refer to the exhibit. Cisco Unified Border Element is attempting to establish a call with Subscriber 1, but the call fails.Cisco Unified Border Element then retries the same call with Subscriber 2, and the call proceeds normally. Which action resolves the issue?

Verify that the Run On All Active Unified CM Nodes checkbox is enabled.

Verify that the correct calling search space is selected for the Inbound Calls section.

Verify that the Significant Digits field for Inbound Calls is set to All.

Verify that the PSTN Access checkbox is enabled.

Refer to the exhibit. A collaboration engineer is configuring the Cisco UCM IM and Presence Service. Which two steps complete the configuration of the SIP trunk security profile? (Choose two.)

Check the box to accept replaces header.

Check the box to accept unsolicited notification.

Check the box to accept replaces header.

Check the box to allow charging header.

Check the box to enable application-level authorization.

Check the box to transmit security status.

Check the box to accept unsolicited notification.

Refer to the exhibit. An engineer is troubleshooting this video conference issue:A video call between a Cisco 9971 in Region1 and another Cisco 9971 in Region1 works.As soon as the Cisco 9971 in Region1 conferences in a Cisco 8945 in Region2, the Region1 endpoint cannot see the Region2 endpoint video.What is the cause of this issue?

Cisco 8945 does not have a camera connected.

Maximum Audio Bit Rate must be increased.

Maximum Session Bit Rate for Video Calls is too low.

Maximum Session Bit Rate for Immersive Video Calls is too low.

What is the purpose of Mobile and Remote Access (MRA) in the Cisco UCM architecture?

MRA is used to make B2B calls through Expressway registration.

MRA is used to access Webex cloud services only if authenticated with on-premises LDAP service.

MRA is used to make secure PSTN calls by Cisco UCM only while on-premises authentication.

MRA is used to make B2B calls through Expressway registration.

MRA is used to access the collaboration services offered by Cisco UCM from off-premises network connections.

When a call is delivered to a gateway, the calling and called party number must be adapted to the PSTN service requirements of the trunk group. If a call is destined locally, the + sign and the explicit country code must be replaced with a national prefix. For the same city or region, the local area code must be replaced by a local prefix as applicable. Assuming that a Cisco UCM has a SIP trunk to a New York gateway (area code 917), which two combinations of solutions localize the calling and called party for a New York phone user? (Choose two.)

Configure the gateway to translate called numbers and apply it to the dial peer. Combine it with a translation profile for calling numbers.! voice translation-rule 1rule 1 /^1917!/ //rule 2 /^[+]1917!/ //!voice translation-profile strip+1 translate called 1 !

Configure two calling party transformation patterns:\+1917.XXXXXXX, strip pre-dot, numbering type: subscriber\+1.!, strip pre-dot, numbering type: national

Configure the gateway to translate the calling number and apply it to the dial peer. Combine it with a translation profile for called numbers.! voice translation-rule 1rule 1 /^1917/ //rule 2 /^ [+]1917/ //!voice translation-profile strip+1 translate calling 1 !

Configure two calling party transformation patterns:\+1917.CCCCCC, strip pre-dot, numbering type: subscriber\+!, strip pre-dot, numbering type: national

Configure two called party transformation patterns:\+1917.XXXXXXX, strip pre-dot, numbering type: subscriber\+1.!, strip pre-dot, numbering type: national

Configure the gateway to translate called numbers and apply it to the dial peer. Combine it with a translation profile for calling numbers.! voice translation-rule 1rule 1 /^1917!/ //rule 2 /^[+]1917!/ //!voice translation-profile strip+1 translate called 1 !

Configure two calling party transformation patterns:\+1917.XXXXXXX, strip pre-dot, numbering type: subscriber\+1.!, strip pre-dot, numbering type: national

A customer reports that the Cisco UCM toll-fraud prevention does not work correctly, and the customer is receiving charges for unapproved international calls as a result. Which two configuration changes resolve the issues? (Choose two.)

Mark patterns as off-net or on net.

Modify the Block OffNet to OffNet Transfer service parameter.

Use Cisco Unified Border Element to debug the calls.

Disable call forwarding on the phone.

Make the calls route through a firewall.

Mark patterns as off-net or on net.

Modify the Block OffNet to OffNet Transfer service parameter.

A Cisco UCM administrator sets up new route patterns to support phones in four different locations, all with local gateways. The administrator wants to use the same route pattern for all four locations.How must the system be configured to achieve this goal?

Use standard local route groups.

Use transforms in the route groups.

Use standard local route groups.

Add a CSS to each local gateway.

Use CSS alternate routing rules.

What are two QoS requirements for VoIP traffic? (Choose two.)

Loss must be no more than 1 percent.

Voice traffic must be marked to DSCP EF.

Loss must be no more than 1 percent.

Voice traffic must be marked to DSCP AF41.

One-way latency must be no more than 200 ms.

Voice traffic must be marked to DSCP EF.

Average one-way jitter is greater than 50 ms.

What is an indicator of network congestion in VoIP communications?

jitter increase due to variable delay

video loss due to video frame corruption

gaps in the voice due to packet loss

discards in the interface of routers and switches

An engineer configures a SIP trunk for MWI between a Cisco UCM cluster and Cisco Unity Connection. The Cisco UCM cluster fails to receive the SIP notify messages. Which two SIP trunk settings resolve this issue? (Choose two.)

accept unsolicited notification

accept out-of-band notification

What are the predefined call handlers in Cisco Unity Connection?

opening greeting, operator, and goodbye

opening greeting, welcome, and default system

greetings, operator, and closed

caller input, greetings, and transfer

An administrator configures the voicemail feature in a Cisco collaboration deployment. The user mailboxes must be configured when the Cisco Unity Connection server is configured. Which action accomplishes this task?

Configure a SIP integration with Cisco UCM to sync users.

Configure an SCCP integration with Cisco UCM.

Configure a SIP integration with Cisco UCM to sync users.

Configure an AXL server to access the Cisco UCM users.

Configure an active directory to sync the users who will have a voicemail box.

A company has an excessive number of call transfers to local and long-distance PSTN from Cisco Unity Connection voicemail. Which action in the Cisco Unity Connection restriction table resolves this issue?

Block PSTN patterns on Default Transfer, Default Outdial, and Default System Transfer.

Implement password complexity on voicemail boxes to prevent accounts from being compromised.

Create a custom restriction table *********** and block it.

Create a custom restriction table ??????????? and block it.

Which configuration concept allows for high-availability on IM and Presence services in a UC environment?

Presence Redundancy Groups (configured on Cisco UCM)

IM and Presence subclusters (configured on Cisco UCM)

Presence Redundancy Groups (configured on Cisco Unified IM and Presence)

IM and Presence subclusters (configured on Cisco Unified IM and Presence)

Presence Redundancy Groups (configured on Cisco UCM)

Refer to the exhibit. Refer to the exhibit. A collaboration engineer adds an analog gateway to a Cisco UCM cluster. The engineer chooses MGCP over SCCP as the gateway protocol. Which two actions ensure that the gateway registers? (Choose two.)

Enter "ccm-manager mgcp" on the gateway in configuration mode.

Enter "mgcp" on the gateway in configuration mode.

Enter "no seep" on the gateway in configuration mode.

Enter "ccm-manager mgcp" on the gateway in configuration mode.

Enter "mgcp" on the gateway in configuration mode.

Enter "ccm-manager config" on the gateway in configuration mode.

Delete and re-add the gateway configuration in Cisco UCM.

An engineer must configure switch port 5/1 to send CDP packets to configure an attached Cisco IP phone to trust tagged traffic on it’s access port. Which command is required to complete the configuration?

platform qos trust extend cos 3

platform qos trust extend cos 5

An administrator uses the Cisco Unified Real-Time Monitoring Tool to investigate recent calls on a Cisco UCM cluster. The SIP trace for an on-net. direct-media call shows two 180 Ringing and two 11 BYE messages. Why are there multiples of each message type in the trace?

The source phone sends a 180 Ringing signal to the Cisco UCM. which sends a 180 Ringing signal to the destination phone. The same process applies to 11 BYE messages.

The source phone must signal to the destination phone that it is ringing, and the destination phone signals back with a 180 Ringing message. The same process applies to 11 BYE messages.

The calls have an MTP in the call path due to different codec support. The calls are subsequently split into two call legs.

The destination phone signals back to the Cisco UCM that it is ringing, and the Cisco UCM signals back to the source phone.

Which dial plan function restricts calls that are made by a lobby phone to internal extensions only?

manipulation of dialed destination

Which service on the Presence Server is responsible for maintaining the point-to-point chat connections between Jabber clients?

Cisco XCP Text Conference Manager

Cisco XCP XMPP Federation Manager

Which information is needed to restore the backup of a Cisco UCM publisher successfully?

the security password for Cisco UCM

the application credentials for Cisco UCM

the security password for Cisco UCM

Which value should be changed when each Cisco UCM node does not allow for more than 50phones to be registered?

Maximum Number of Registered Devices service parameter on each node

Maximum Number of Registered and Unregistered Devices service parameter on each node

Minimum Number of Phones service parameter on each node

Maximum Number of Registered Devices service parameter on each node

Maximum Number of Phones service parameter on the Publisher

Which behavior occurs when Cisco UCM has a CallManager group that consists of two subscribers?

Endpoints attempt to register with the top subscriber in the list.

Endpoints attempt to register with the bottom subscriber in the list.

Endpoints attempt to register with the top subscriber in the list.

Endpoints attempt to register with both subscribers in a load-balanced method.

If a subscriber is rebooted, endpoints deregister until the rebooted system is back in service.

Refer to the exhibit. Refer to the exhibit. An engineer configures ISDN on a voice gateway. The provider confirms that the PRI is configured with 10 channels the engineer ordered and is working from the provider side, but the engineer cannot get a B-channel to carry voice. The rest of the configuration for the serial interface and voice network is functioning correctly. Which actions must be taken to carry voice?

The engineer must activate the controller card on the voice gateway before configuring the device.

The engineer used a T1 interface but must use an E1 interface.

The pri-group timeslots command must be 0-9 for the 10 channels because all values on a routerstart with 0.

The engineer must manually revert the order of using the channels.

When multiple potential patterns are present, which two things are considered when Cisco UCM selects a destination pattern? (Choose two.)

The pattern matches the shortest explicit prefix.

The pattern matches the dialed string.

The pattern matches the shortest explicit prefix.

The pattern does not match the dialed string.

The pattern represents the smallest number of endpoints.

The pattern matches the dialed string.

The pattern represents the largest number of endpoints.

What is a characteristic of a SIP endpoint configured in Cisco UCM with ’Use Trusted Relay Point' setto "On’?

It enables Cisco UCM to insert an MTP or transcoder designated as a TRP.

It creates a trust relationship with the called party.

It enables the Use Trusted Relay Point setting from the associated common device configuration.

It enables Cisco UCM to insert an MTP or transcoder designated as a TRP.

If TRP is allocated and MTP is also required for the endpoint. calls fail.

Cisco 350-801 Practice Test 8 - Free Online Exam Prep & Questions

A customer wants to conduct B2B video calls with a partner using an on-premises conferencing solution. Which two devices are needed to facilitate this request? (Choose two.)

Become a Premium Member for full access

Unlock Premium Member

Cisco 350-801 Practice Test 8

Question

Cisco 350-801 Practice Tests

Practice Tests