ExamGecko
Login
Home / HP / HPE0-V14 / List of questions
Ask Question

HP HPE0-V14 Practice Test - Questions Answers, Page 5

Add to Whishlist

List of questions

Question 41

Report Export Collapse

A customer needs to verify inbound packet statistics for interfaceTen-GigabitEthernet 1/0/10 on an HPE FlexFabric 5900 series switch used by an iSCSI storage array.

Which command can be used in the CLI to perform this operation?

show inbound counters port 1/0/10
show inbound counters port 1/0/10
display counters inbound interface Ten-GigabitEthernet 1/0/10
display counters inbound interface Ten-GigabitEthernet 1/0/10
display all statistics from port 1/0/10
display all statistics from port 1/0/10
interface Ten-GigabitEthernet 1/0/10 show counters
interface Ten-GigabitEthernet 1/0/10 show counters
Suggested answer: B
Explanation:

https://techhub.hpe.com/eginfolib/networking/docs/switches/5950/5200-4013a_l2-lan_cr/content/504039110.htm

asked 16/09/2024
brandon millette
57 questions

Question 42

Report Export Collapse

What is a primary benefit of DAS?

It takes advantage of Common Internet File System (CIFS).
It takes advantage of Common Internet File System (CIFS).
It is presented as an iSCSI LUN to the attached server.
It is presented as an iSCSI LUN to the attached server.
It can be accessed by both server and non-server devices simultaneously.
It can be accessed by both server and non-server devices simultaneously.
It is connected directly to a server.
It is connected directly to a server.
Suggested answer: D
asked 16/09/2024
Oktorio Rizki Prasetya
48 questions

Question 43

Report Export Collapse

Refer to the exhibit.

HP HPE0-V14 image Question 43 13145 09162024180419000000

When performing a code upgrade on an HPE Nimble array, you noticed a connection failure on ESX1.

Refer to the exhibit showing the complete zoning configuration of one of the HPE SN3000B switches.

What should you do to ensure storage access is not interrupted when doing the next update?

Create and ISL between the two HPE SN3000B switches.
Create and ISL between the two HPE SN3000B switches.
Create a new zone for ESX1 and the second storage controller.
Create a new zone for ESX1 and the second storage controller.
Change the timeout values on the SN3000B switch.
Change the timeout values on the SN3000B switch.
Configure the same zone on a second HPE SN3000B.
Configure the same zone on a second HPE SN3000B.
Suggested answer: B
asked 16/09/2024
Alejandro Ramirez Cuesta
41 questions

Question 44

Report Export Collapse

You have configured a port on an HPE FlexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs.

HP HPE0-V14 image Question 44 13146 09162024180419000000

Given the configuration above, what should happen to any of the untagged traffic coming from the VMware ESXi host?

The untagged traffic with be dropped.
The untagged traffic with be dropped.
The untagged traffic will be transmitted in vlan 2.
The untagged traffic will be transmitted in vlan 2.
The untagged traffic will be transmitted in vlan 50.
The untagged traffic will be transmitted in vlan 50.
The untagged traffic will be transmit.ted in vlan 1.
The untagged traffic will be transmit.ted in vlan 1.
Suggested answer: C
asked 16/09/2024
e m
38 questions

Question 45

Report Export Collapse

Which hardware and software components make up a Nimble dHCI infrastructure?

HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and VMware
HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and VMware
Aruba Switches, HPE Synergy, HPE Nimble, and VMware
Aruba Switches, HPE Synergy, HPE Nimble, and VMware
HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and Hyper-V
HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and Hyper-V
Aruba Switches, HPE Synergy, HPE Nimble, and Hyper-V
Aruba Switches, HPE Synergy, HPE Nimble, and Hyper-V
Suggested answer: A
Explanation:

Reference: https://community.hpe.com/t5/HPE-Storage-Tech-Insiders/HPE-Nimble-Storage-dHCITechnical-Overview/ba-p/7054163#.XnxfMW5RWQ4

asked 16/09/2024
Angela Cappa
39 questions

Question 46

Report Export Collapse

A customer just purchased a ProLiant 300 series Gen10 server and wants to install the latest version of Windows.

Which feature of this server will assist the customer with the initial Windows installation?

HPE SSA Diagnostics
HPE SSA Diagnostics
HPE SmartStart
HPE SmartStart
Smart Storage Administrator
Smart Storage Administrator
Intelligent Provisioning
Intelligent Provisioning
Suggested answer: D
Explanation:

Reference: https://community.hpe.com/t5/Alliances/Get-HPE-Gen10-Servers-with-Windows-Server-2019-up- and-Running-in/ba-p/7066128#.XnxeVG5RWQ4

asked 16/09/2024
Massimo Cerqui
43 questions

Question 47

Report Export Collapse

Refer to the exhibit.

HP HPE0-V14 image Question 47 13149 09162024180419000000

An administrator connected a hypervisor to interface Ten-GigabitEthernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. VLAN 10 is configured to be tagged, and VLAN 20 is configured to be untagged on the hypervisor.

The administrator found that all the virtual machines in VLAN 20 can communicate with each other, but not with any virtual machines on VLAN 20 external to the hypervisor.

Given the output in the exhibit, customer needs a new environment to support an ERP system. The sizing information you received shows the following

Permit VLAN 1 on the interface.
Permit VLAN 1 on the interface.
Configure the PVID of the interface to be VLAN 20.
Configure the PVID of the interface to be VLAN 20.
Configure the interface as an access port.
Configure the interface as an access port.
Configure the interface as an IRF port. check
Configure the interface as an IRF port. check
Suggested answer: B
asked 16/09/2024
cheitram patel
38 questions

Question 48

Report Export Collapse

Refer to the exhibit.

HP HPE0-V14 image Question 48 13150 09162024180419000000

A customer has two HPE ProLiant DL380 Gen10 servers running as an Oracle cluster. They are trying to reduce licensing costs and want to move to the best processor available from the list to minimize licensing costs while still providing a high level of performance for the Oracle database.

Which DL380 Gen10 processor would you recommend?

Intel Xeon-Platinum 8280M
Intel Xeon-Platinum 8280M
Intel Xeon-Platinum 8280
Intel Xeon-Platinum 8280
Intel Xeon-Platinum 8256
Intel Xeon-Platinum 8256
Intel Xeon-Platinum 8253
Intel Xeon-Platinum 8253
Suggested answer: C
asked 16/09/2024
Tony Hardyanto
37 questions

Question 49

Report Export Collapse

A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.

Which HPE tool should you recommend to performing this task?

OneView Advanced
OneView Advanced
iLO Amplifier Pack
iLO Amplifier Pack
Smart Update Manager
Smart Update Manager
OneView Standard
OneView Standard
Suggested answer: B
Explanation:

Reference: https://www.hpe.com/emea_europe/en/servers/smart-update.html

asked 16/09/2024
Valencia, Luis
45 questions

Question 50

Report Export Collapse

Which HPE feature enables the customer to achieve this A customer has a new virtual environment.

They selected HPE servers for the environment in order to achieve better performance for their applications. server performance improvement?

embedded application
embedded application
workload performance advisor
workload performance advisor
workload profile
workload profile
Active Health System
Active Health System
Suggested answer: C
asked 16/09/2024
Ali Alaqoul
42 questions
Total 297 questions
Go to page: of 30
Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

A customer is upgrading their network infrastructure to provide the best performance for IP storage. Which technologies in a network switch meet the customer's needs? (Choose three.)
DRAG DROP Match the HPE Tool with its use case. Select all that apply.
When should you use the HPE Switch Selector?
DRAG DROP Match each workload profile description with the corresponding profile. (Select all that apply.)
A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following: Multi-protocol connectivity Flash-accelerated storage Low-cost midline SAS drives Which HPE storage platform will meet these requirements?
You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient temperature of 45 °C (113 °F). Which additional option is required?
A customer plans to use HPE ProLiant servers for an application that requires low latency for all components. Which workload profile should the customer use?
Which HPE tool can you use to ensure a consistent level of firmware exists across all BladeSystem interconnects and servers in an environment?
A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch. Which feature should the customer implement at the switch level?
A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability. Which HPE server family meets the customer's needs?