Home / HP / HPE6-A71

HP HPE6-A71 Practice Test - Questions Answers, Page 7

Question list

List of questions

Question 61

(0)

An administrator has ArubaOS-Switches that support tunneled node. The administrator wants to tunnel all user traffic from the Ethernet ports on the switches, and have the controllers authenticate th

Question 62

(0)

An administrator manages an Aruba wireless network. ClearPass is used to centralize AAA functions. The administrator wants to implement server role derivation. Which information will the ClearPass

Question 63

(0)

What are the responsibilities of a cluster leader in a cluster of Aruba Mobility Controllers (MCs)? (Choose two.)

Question 64

(0)

An administrator wants to implement a Live Upgrade (in-service upgrade) of a cluster in an Aruba wireless solution. Which ArubaOS feature does the Mobility Master (MM) use to ensure RF redundancy, s

Question 65

(0)

Refer to the exhibit. An administrator configures a split-tunnel policy to be used by RAPs at branch offices. Under the Configuration section on the Mobility master (MM) shown in the exhibit, whe

Question 66

(0)

Which ArubaOS CLI command can an administrator execute to determine if AP load balancing is enabled in a cluster?

Question 67

(0)

What must an administrator configure in order for the ClearPass server to execute a RADIUS Change of Authorization (CoA) to Aruba Mobility Controllers (MCs) in a cluster?

Question 68

(0)

An administrator configures a network scan set in AirWare to scan a subnet to discover new switches. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access. Ho

Question 69

(0)

Which Aruba AP mode constantly scans the radio environment to gather IDS and RF information?

Question 70

(0)

An administrator needs to apply a patch to an Aruba environment to implement improvements for AirMatch. What is the Aruba recommended approach for this process without a reboot?

Related questions

An administrator wants to use AirWave to manage the configuration policy settings of a set of ArubaOS-Switches. Where should the administrator perform this action?

Refer to the exhibit. An AP is connected to a cluster of controllers. An AAA server provides all authentication and authorization functions for wireless users. A wireless user connects to an AP, and Active User Anchor Controller (A-UAC) and Standby UAC (S- UAC) tunnels are built from the AP to the respective controllers in the cluster. Why would an administrator create four VRRP groups with four Virtual IP (VIP) addresses in the cluster?

An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone. What must the administrator do to fix this problem?

An administrator wants to dynamically upgrade AppRF on Aruba Mobility Controllers (MC) in a cluster. The administrator does not want to reboot the system at the time of the upgrade. What should the administrator use for this upgrade?

Refer to the exhibit. An administrator configures policies to allow RAPs to connect to the corporate office and remote users to access resources. Which function does the VPN address pool serve in this situation?

Refer to the exhibit. The branch office RAP shown in the exhibit provides secure wireless employee access. Because of security concerns, the company's security policy does not allow wireless guest access. Some customers that visit the Branch office need Internet access. A RAP's Ethernet Port 3 is used for wired guest access and Port2 is used for wired employee access. When employees connect to Port2, they are authenticated successfully and split-tunnel policy allows them access to both corporate and Internet resources from the Branch office. Guest users, however, cannot access Internet resources on Port 3. How can the administrator provide guest users Internet access?

Which forwarding mode is used for a WLAN if a RAP needs to decrypt all user traffic and forward it locally?

An administrator implements the Aruba AitGroup feature to accommodate the Apple Bonjour service. In this implementation, which protocol advertises devices such as printers, computers, and their services?

An administrator manages an AirWave Management Platform (AMP). The AMP server receives many SNMP traps from managed devices, but no alerts are generated on the AMP for certain critical traps. Which rule should the administrator create to cause the AMP server to generate an alert based on receipt of a critical SNMP trap from an Aruba Mobility Controller (MC)?

Where would an administrator define the split-tunneling mode for a RAP located at a branch office?

Question 61

An administrator has ArubaOS-Switches that support tunneled node. The administrator wants to tunnel all user traffic from the Ethernet ports on the switches, and have the controllers authenticate the user traffic and apply the appropriate user role.

Which implementation meets these requirements?

Role-based tunneled node with the controllers configured for standalone mode

Role-based tunneled node with the controllers configured in a cluster

Per-port tunneled node with the controllers configured for standalone mode

Per-port tunneled node with the controllers configured in a cluster

Show Answer Comment (0)

Question 62

An administrator manages an Aruba wireless network. ClearPass is used to centralize AAA functions.

The administrator wants to implement server role derivation.

Which information will the ClearPass server return in regards to the user role assignment?

RADIUS VSA User-Role

Aruba VSA Firewall-Role

Aruba VSA Aruba-User-Role

RADIUS VSA Firewall-Role

Show Answer Comment (0)

Question 63

What are the responsibilities of a cluster leader in a cluster of Aruba Mobility Controllers (MCs)?

(Choose two.)

To identify primary and secondary Mobility Controllers for APs

To create a table to determine how a wireless client maps to a cluster member

To identify a backup cluster leader for redundancy

To manage the configuration of cluster members

To automatically load balance clients if the load across cluster members changes

Show Answer Comment (0)

Question 64

An administrator wants to implement a Live Upgrade (in-service upgrade) of a cluster in an Aruba wireless solution. Which ArubaOS feature does the Mobility Master (MM) use to ensure RF redundancy, so that when one or more APs are rebooted there is no loss of wireless coverage for users?

AirMatch

Mobility Controller load balancing

AP image preload

AP image verification

Show Answer Comment (0)

Question 65

Refer to the exhibit.

An administrator configures a split-tunnel policy to be used by RAPs at branch offices. Under the Configuration section on the Mobility master (MM) shown in the exhibit, where should the administrator configure the split-tunnel mode so that it can be deployed to the RAPs?

WLAN

Roles & Policies

Access Points

Services

Show Answer Comment (0)

Question 66

Which ArubaOS CLI command can an administrator execute to determine if AP load balancing is enabled in a cluster?

show aaa cluster essid

show lc-cluster group-membership

show switches

show ap active

Show Answer Comment (0)

Question 67

What must an administrator configure in order for the ClearPass server to execute a RADIUS Change of Authorization (CoA) to Aruba Mobility Controllers (MCs) in a cluster?

Active and Standby AAC with clustering

VRRP IP on each cluster member

IPSec High Availability (HA) between two cluster members

Primary and backup LMS IP addresses

Show Answer Comment (0)

Question 68

An administrator configures a network scan set in AirWare to scan a subnet to discover new switches. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access. However, SSH access fails and the administrator must manually configure the SSH credentials used for all of these devices.

To prevent this problem in the future, what should the administrator complete prior to running the network scan?

Define the SSH communication parameters under the Group's Manage section.

Define a scan credentials set that includes the SSH communication parameters.

Define the SSH communication parameters under the AP/Device's Manage section.

Define the SSH communication parameters for the Default Credentials under Device Setup section.

Show Answer Comment (0)

Question 69

Which Aruba AP mode constantly scans the radio environment to gather IDS and RF information?

Spectrum AP

RAP

Mesh Portal

Air Monitor

Show Answer Comment (0)

Question 70

An administrator needs to apply a patch to an Aruba environment to implement improvements for AirMatch. What is the Aruba recommended approach for this process without a reboot?

Upgrade the AirMatch Loadable Service Module (LSM) on each Mobility Controller.

Upgrade the AirMatch Loadable Service Module (LSM) on the Mobility Master.

Upgrade the ArubaOS by the use of Live Upgrades (in-service upgrades).

Create controller partitions to minimize downtime.

Show Answer Comment (0)

Total 171 questions

5 6 7 8 9

Go to page: of 18