CompTIA N10-008 Practice Test - Questions Answers, Page 17

Logging level is a setting that determines what types of events are recorded by a device and sent to a syslog server. Different logging levels have different severity levels, ranging from emergency to debug. If the technician performed a manual reconfiguration of the firewall, it is possible that the logging level was changed or reset to a lower level that does not include the connection events that were previously sent to the syslog server. To fix the issue, the technician should adjust the proper logging level on the new firewall to match the desired level of detail and severity for the connection events. Reference: Network+ Study Guide Objective 3.4: Explain common scanning, monitoring and patching processes and summarize their expected outputs. Subobjective: Syslog.

"Jitter is the loss of packets due to an overworked WAP. Jitter shows up as choppy conversations over a video call, strange jumps in the middle of an online game—pretty much anything that feels like the network has missed some data. Latency is when data stops moving for a moment due to a WAP being unable to do the work. This manifests as a Word document that stops loading, for example, or an online file that stops downloading."

"Humidity control prevents the buildup of static electricity and reduces the chances of electronic components becoming vulnerable to damage from electrostatic shock; not only can very low humidity lead to increased static electricity, but it can also contribute to health problems, such as skin irritation."

The question asks about the best configuration for the WLAN being tested, which involveschannel bonding on an 802.11ac AP.Channel bonding is a technique that combines two or moreadjacent channels into a wider channel to increase the bandwidth and throughput of thewireless network1.

The answer is to set up the AP to perform a dynamic selection of the frequency according toregulatory requirements.This means that the AP will automatically choose the best availablechannel and adjust the transmit power based on the local regulations and the interferencelevel2.This way, the AP can avoid using the channels that are occupied by the government radiosystem, which may have higher priority and authority over the spectrum3.Upgrading the equipment to an AP that supports manual configuration of the EIRP powersettings is not the best solution, because it does not address the channel selection issue. EIRPstands for Effective Isotropic Radiated Power, which is the total power radiated by the antennain all directions. Manual configuration of the EIRP may allow the administrator to increase ordecrease the signal strength, but it may also violate the regulatory limits or cause moreinterference with other devices.Switching to 802.11n, disabling channel auto-selection, and enforcing channel bonding on theconfiguration is also not the best solution, because it may degrade the performance andcompatibility of the WLAN. 802.11n is an older standard than 802.11ac, which has lowermaximum data rates and fewer features. Disabling channel auto-selection may prevent the APfrom adapting to the changing environment and finding the optimal channel. Enforcing channelbonding may increase the bandwidth, but it may also increase the interference and reduce thenumber of available channels.Deactivating the band 5GHz to avoid interference with the government radio is not the bestsolution, because it may limit the functionality and capacity of the WLAN. The 5GHz band hasmore channels and less congestion than the 2.4GHz band, which makes it suitable for high-performance applications and devices. Deactivating the band 5GHz may force the WLAN to useonly the 2.4GHz band, which may reduce the speed, range, and reliability of the wirelessnetwork.Reference:Channel BondingDynamic Frequency SelectionRadio Regulations[EIRP Calculator][EIRP and Regulatory Domains][802.11n vs 802.11ac][Channel Auto-Selection][Channel Bonding and Interference]

[5GHz vs 2.4GHz][5GHz Band Deactivation]