CompTIA N10-009 Practice Test - Questions Answers, Page 4

Definition of Heat Maps:

A heat map is a graphical representation of data where individual values are represented by colors. In the context of wireless networking, a heat map shows the wireless signal strength in different areas of a building.

Purpose of a Heat Map:

Heat maps are used to illustrate the effectiveness of wireless networking coverage, identify dead zones, and optimize the placement of access points (APs) to ensure adequate coverage and performance.

Comparison with Other Options:

Logical Diagram: Represents the logical connections and relationships within the network.

Layer 3 Network Diagram: Focuses on the routing and IP addressing within the network.

Service-Level Agreement (SLA): A contract that specifies the expected service levels between a service provider and a customer.

Creation and Use:

Heat maps are created using specialized software or tools that measure wireless signal strength throughout the building. The data collected is then used to generate a visual map, guiding network administrators in optimizing wireless coverage.

CompTIA Network+ certification materials and wireless network planning guides.

Role of the Hosts File:

The hosts file is a local file on a computer that maps hostnames to IP addresses. It can be used to override DNS resolution by providing a static mapping of a hostname to an IP address.

Common Issues with the Hosts File:

If an incorrect IP address is mapped to a hostname in the hosts file, it can cause the computer to resolve the hostname to the wrong IP address. This can lead to navigation issues for specific websites while other users, relying on DNS, do not face the same problem.

Why Other Options are Less Likely:

Self-signed certificate: Relates to SSL/TLS and would cause a security warning, not a navigation failure.

Nameserver record: Affects all users, not just one.

IP helper: Used to forward DHCP requests and is unrelated to DNS resolution issues.

Troubleshooting Steps:

Check the hosts file on the affected user's computer (C:\Windows\System32\drivers\etc\hosts on Windows or /etc/hosts on Unix/Linux).

Look for entries that map the problematic hostname to an incorrect IP address and correct or remove them.

CompTIA Network+ study materials and system administration documentation.

Definition of SD-WAN:

Software-Defined Wide Area Network (SD-WAN) is a technology that simplifies the management and operation of a WAN by decoupling the networking hardware from its control mechanism. It allows for centralized management and enhanced security.

Benefits of SD-WAN:

Reduced Provisioning Time: SD-WAN enables quick and easy deployment of new sites with centralized control and automation.

Security: Incorporates advanced security features such as encryption, secure tunneling, and integrated firewalls.

Scalability: Easily scales to accommodate additional sites and bandwidth requirements.

Comparison with Other Technologies:

VXLAN (Virtual Extensible LAN): Primarily used for network virtualization within data centers.

VPN (Virtual Private Network): Provides secure connections but does not offer the centralized management and provisioning efficiency of SD-WAN.

NFV (Network Functions Virtualization): Virtualizes network services but does not specifically address WAN management and provisioning.

Implementation:

SD-WAN solutions are implemented by deploying edge devices at each site and connecting them to a central controller. This allows for dynamic routing, traffic management, and security policy enforcement.

CompTIA Network+ course materials and networking solution guides.

Importance of Proper Termination:

Cat 8 cabling requires precise termination practices to ensure signal integrity and reduce interference. One common requirement is to wrap the end connections in copper tape to maintain shielding and reduce electromagnetic interference (EMI).

Interference Troubleshooting:

Interference in high-frequency cables like Cat 8 can be caused by improper shielding or grounding. Checking the end connections for proper wrapping in copper tape is a crucial step.

Why Other Options are Less Likely:

Passthrough modular crimping plugs: Not specifically related to interference issues and are typically used for ease of cable assembly.

Connecting RX/TX wires to different pins: Would likely result in no connection or incorrect data transmission rather than interference.

Running a speed test on a device that can only achieve 100Mbps speeds: This would not diagnose interference and would not provide relevant information for Cat 8 cabling rated for higher speeds.

Corrective Actions:

Verify that all end connections are properly wrapped with copper tape before termination.

Ensure that the shielding is continuous and properly grounded throughout the installation.

Retest the cabling for interference after making corrections.

CompTIA Network+ study materials and structured cabling installation guides.

Understanding Rack Size Determination:

The size of a rack for installation is determined by the dimensions of the equipment to be housed in it, primarily focusing on the depth and height of the devices.

Switch Depth:

Depth of Equipment: The depth of network switches and other rack-mounted devices directly influences the depth of the rack. If the equipment is deeper, a deeper rack is required to accommodate it.

Industry Standards: Most racks come in standard depths, but it is essential to match the depth of the rack to the deepest piece of equipment to ensure proper fit and airflow.

Server Height:

Height of Equipment: The height of servers and other devices is measured in rack units (U), where 1U equals 1.75 inches. The total height of all equipment determines the overall height requirement of the rack.

Rack Units: A rack's height is typically described in terms of the number of rack units it can accommodate, such as 42U, 48U, etc.

Why Other Options are Less Relevant:

KVM Size: While important for management, KVM (Keyboard, Video, Mouse) switches do not typically determine rack size.

Hard Drive Size: Individual hard drives are installed within servers or storage devices, not directly influencing rack dimensions.

Cooling Fan Speed: Fan speed affects cooling but not the physical size of the rack.

Outlet Amperage: Power requirements do not determine rack dimensions but rather the electrical infrastructure supporting the rack.

CompTIA Network+ study materials on rack installation and equipment sizing.

Understanding VoIP and VLANs:

VoIP (Voice over IP) phones often use VLANs (Virtual Local Area Networks) to separate voice traffic from data traffic for improved performance and security.

Tagging Traffic to Voice VLAN:

Voice VLAN Configuration: The port on the switch needs to be configured to tag traffic for the specific voice VLAN. This ensures that voice packets are prioritized and handled correctly.

VLAN Tagging: VLAN tagging allows the switch to identify and separate voice traffic from other types of traffic on the network, reducing latency and jitter for VoIP communications.

Comparison with Other Options:

Trunk all VLANs on the port: Trunking all VLANs is typically used for links between switches, not for individual device ports.

Configure the native VLAN: The native VLAN is for untagged traffic and does not address the need for separating and prioritizing voice traffic.

Disable VLANs: Disabling VLANs would mix voice and data traffic, leading to potential performance issues and lack of traffic separation.

Implementation:

Configure the switch port connected to the VoIP phone to tag the traffic for the designated voice VLAN, ensuring proper network segmentation and quality of service.

CompTIA Network+ study materials on VLAN configuration and VoIP implementation.

Definition of MAC Flooding:

MAC flooding is an attack where a malicious actor sends numerous fake MAC addresses to a switch, overwhelming its CAM table. The CAM table stores MAC addresses and their associated ports for efficient traffic forwarding.

Impact of MAC Flooding:

CAM Table Overflow: When the CAM table is full, the switch cannot learn new MAC addresses and is forced to broadcast traffic to all ports, leading to a degraded network performance and potential data interception.

Switch Behavior: The switch operates in a fail-open mode, treating the network as a hub, which can be exploited for eavesdropping on traffic.

Comparison with Other Attacks:

ARP Spoofing: Involves sending false ARP (Address Resolution Protocol) messages to associate the attacker's MAC address with the IP address of another device.

Evil Twin: Involves creating a rogue wireless access point that mimics a legitimate one to intercept data.

DNS Poisoning: Involves corrupting the DNS cache with false information to redirect traffic to malicious sites.

Preventive Measures:

Port Security: Configure port security on switches to limit the number of MAC addresses per port, preventing CAM table overflow.

Network Segmentation: Use VLANs to segment network traffic and limit the impact of such attacks.

CompTIA Network+ study materials on network security threats and mitigation techniques.

Role of NTP (Network Time Protocol):

NTP is used to synchronize the clocks of network devices to a reference time source. Accurate time synchronization is critical for correlating events and logs from different systems.

Importance for SIEM Systems:

Event Correlation: SIEM (Security Information and Event Management) systems collect and analyze log data from various sources. Accurate timestamps are essential for correlating events across multiple systems.

Time Consistency: Without synchronized time, it is challenging to piece together the sequence of events during an incident, making forensic analysis difficult.

Comparison with Other Protocols:

DNS (Domain Name System): Translates domain names to IP addresses but is not related to time synchronization.

LDAP (Lightweight Directory Access Protocol): Used for directory services, such as user authentication and authorization.

DHCP (Dynamic Host Configuration Protocol): Assigns IP addresses to devices on a network but does not handle time synchronization.

Implementation:

Ensure that all network devices, servers, and endpoints are synchronized using NTP. This can be achieved by configuring devices to use an NTP server, which could be a local server or an external time source.

CompTIA Network+ study materials on network protocols and SIEM systems.

Definition of ESP (Encapsulating Security Payload):

ESP is a part of the IPsec protocol suite designed to provide confidentiality, integrity, and authenticity of data by encrypting the payload and optional ESP trailer.

Ensuring Confidentiality:

Encryption: ESP encrypts the payload, ensuring that the data remains confidential during transmission. Only authorized parties with the correct decryption keys can access the data.

Modes of Operation: ESP can operate in transport mode (encrypts only the payload) or tunnel mode (encrypts the entire IP packet), both providing strong encryption to secure data between sites.

Comparison with Other Protocols:

GRE (Generic Routing Encapsulation): A tunneling protocol that does not provide encryption or security features.

IKE (Internet Key Exchange): A protocol used to set up a secure, authenticated communications channel, but it does not encrypt the data itself.

AH (Authentication Header): Provides integrity and authentication for IP packets but does not encrypt the payload.

Implementation:

Use ESP as part of an IPsec VPN configuration to encrypt and secure communication between two sites. This involves setting up IPsec policies and ensuring both endpoints are configured to use ESP for data encryption.

CompTIA Network+ study materials on IPsec and secure communication protocols.