ExamGecko
Login
Home / Cisco / 300-510 / List of questions
Ask Question

Cisco 300-510 Practice Test - Questions Answers, Page 2

Add to Whishlist

List of questions

Question 11

Report Export Collapse

Which statement about enabling segment routing for IGPs is true?

Segment routing must first be enabled under then routing process and then globally

Segment routing must first be enabled under then routing process and then globally

Segment routing must first be enabled globally and then under the routing process

Segment routing must first be enabled globally and then under the routing process

Segment routing can be enabled only under the routing process

Segment routing can be enabled only under the routing process

Segment routing can be enabled only globally

Segment routing can be enabled only globally

Suggested answer: B
Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/seg_routing/configuration/xe-16-6/segrt-xe-16-6-book/sr-ospfv2-node-sid.html

asked 07/10/2024
Juan Manuel Lopez Ortega
33 questions

Question 12

Report Export Collapse

Which task is performed when troubleshooting LDP?

Execute the ping utility to generate information about the MAC addresses used along the path

Execute the ping utility to generate information about the MAC addresses used along the path

Verify that MPLS is disabled globally and enabled on the necessary interfaces in a per-interface basis

Verify that MPLS is disabled globally and enabled on the necessary interfaces in a per-interface basis

Execute the traceroute utility to generate information about the labels used along the path

Execute the traceroute utility to generate information about the labels used along the path

Verify that Cisco Express Forwarding has been disabled on the network

Verify that Cisco Express Forwarding has been disabled on the network

Suggested answer: C
asked 07/10/2024
Elham Alasmari
41 questions

Question 13

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 13 112724 10072024005946000000

XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?

Cisco 300-510 image Question 13 112724 10072024005946000000

Cisco 300-510 image Question 13 112724 10072024005946000000

Option A

Option A

Option B

Option B

Option C

Option C

Option D

Option D

Suggested answer: D
Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-1/routing/command/reference/b_routing_cr41crs/b_routing_cr41crs_chapter_01000.html#wp3850885229

asked 07/10/2024
ALOUAT EKRAM
49 questions

Question 14

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 14 112725 10072024005946000000

Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?

TenGigE0/1 interface provides the alternate path

TenGigE0/1 interface provides the alternate path

A backup path must be statically installed

A backup path must be statically installed

TenGigE0/2 interface provides the alternate path

TenGigE0/2 interface provides the alternate path

A primary path must be manually installed

A primary path must be manually installed

Suggested answer: C
asked 07/10/2024
Karlis Priede
40 questions

Question 15

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 15 112726 10072024005946000000

A network operator wants to expand the segment routing global block in upcoming maintenance. The operator must ensure that the changes to the segment routing global block have no adverse impacts on the prefix-sid associated with the loopback0 interface used within the OSPF domain.

Which command can the operator use to enforce R2 to have a strict prefix-sid assignment to loopback0?

Cisco 300-510 image Question 15 112726 10072024005946000000

Option A

Option A

Option B

Option B

Option C

Option C

Option D

Option D

Suggested answer: C
asked 07/10/2024
Peter Klaffehn
46 questions

Question 16

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 16 112727 10072024005946000000

Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?

It must be configured for graceful restart

It must be configured for graceful restart

It must be configured with a route reflector

It must be configured with a route reflector

It must be configured with send labels

It must be configured with send labels

It must be configured with PIC edge

It must be configured with PIC edge

Suggested answer: C
asked 07/10/2024
Rob Kennis
35 questions

Question 17

Report Export Collapse

What can be used to determine a path from the head-end to a tail-end router when implementing SR-TE with a head-end, with little information on the network topology?

traffic controller

traffic controller

path computation engine

path computation engine

tail-end router

tail-end router

SNMP server

SNMP server

Suggested answer: B
asked 07/10/2024
Curl Pushover
29 questions

Question 18

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 18 112729 10072024005946000000

R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?

The BGP session does not come up between R1 and R2 and between R1 and R3.

The BGP session does not come up between R1 and R2 and between R1 and R3.

The BGP session comes up between R1 and R2 and between R1 and R3.

The BGP session comes up between R1 and R2 and between R1 and R3.

The BGP session comes up between R1 and R3, but not between R1 and R2.

The BGP session comes up between R1 and R3, but not between R1 and R2.

The BGP session comes up between R1 and R2, but not between R1 and R3.

The BGP session comes up between R1 and R2, but not between R1 and R3.

Suggested answer: B
asked 07/10/2024
Christopher Horting
46 questions

Question 19

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 19 112730 10072024005946000000

Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?

Router 1 has a list of labels used to explicitly lay out a path to router 2.

Router 1 has a list of labels used to explicitly lay out a path to router 2.

Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.

Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.

Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.

Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.

Router 2 is the head-end tunnel and has explicitly set a path to router 1.

Router 2 is the head-end tunnel and has explicitly set a path to router 1.

Suggested answer: C
asked 07/10/2024
james james
39 questions

Question 20

Report Export Collapse

Which two conditions must be met before separate ISPs can provide interdomain multicast routing?

(Choose two.)

Each ISP must configure MSDP to connect its individual multicast administrative domain to the domains at other ISPs.

Each ISP must configure MSDP to connect its individual multicast administrative domain to the domains at other ISPs.

Each ISP must dedicate a single router to handle multicast traffic between providers.

Each ISP must dedicate a single router to handle multicast traffic between providers.

Each ISP must replace its RP assignment with a global RP.

Each ISP must replace its RP assignment with a global RP.

Each ISP must configure its network to use PIM-DM.

Each ISP must configure its network to use PIM-DM.

Each ISP must support intradomain multicast routing.

Each ISP must support intradomain multicast routing.

Suggested answer: A, E
asked 07/10/2024
Herr Alexandre Fleider
46 questions
Total 214 questions
Go to page: of 22
Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

Refer to the exhibit. Refer to the exhibit. Users connected to an application on 1.1.1.1 via routers CE1 and CE2 are complaining of frequent disconnections. While troubleshooting the issue, a network engineer with an employee ID: 4333:96:916 determined that the application itself is working normally, but the link connected to the 1.1.1.1 application is flapping. The users on CE1 and CE2 are accessing applications on 2.2.2.2 without difficulty. Which action resolves the issue?
Refer to me exhibit. A network engineer sets up a multihoming eBGP topology where multiple Autonomous Systems connect to ASN 64501. The engineer wants to block all the routers coming from ASN 64502. but allow all the others. For that purpose, the following AS Pam prefix 1st s being used: What must be fixed to achieve this result?
Refer to the exhibit.
Refer to the exhibit. An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?
Guidelines This is a lab item in which tasks will be performed on virtual devices. Refer to the Tasks tab to view the tasks for this lab item. Refer to the Topology tab to access the device console(s) and perform the tasks. Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window. All necessary preconfigurations have been applied. Do not change the enable password or hostname for any device. Save your configurations to NVRAM before moving to the next item. Click Next at the bottom of the screen to submit this lab and move to the next question. When Next is clicked, the lab doses and cannot be reopened. Topology Tasks Configure and verify an OSPF neighbor adjacency between R1 and R2 in OSPF area 0 according to the topology to achieve these goals: 1. R1 pings the Loopback0 interface of R2. Use interface-level configuration to complete this task. 2. R2 pings the Loopback0 interface of R1. Use interface-level configuration to complete this task. 3. R2 receives a single summary route 172.16.100.0/22 for networks 172.16.100.0/24, 172.16.101.0/24, and 172.16.103.0/24.
Refer to the exhibit. Routers within the cluster are not receiving the desired prefixes. What must be done to fix the issue?
Refer to the exhibit. The green policy is designed with low delay, and the pink policy is designed with low cost. What is the next hop for node A on its way to node D, with the objective of achieving a low delay?
Refer to the exhibit. Routers R1, R2. R3, and R4 have been configured to run OSPF. and router R5 is running EIGRP Traffic from R1 to R5 is expected to pass via R4. but OSPF routing has calculated the best path via R3. Which action corrects the problem?
Refer to the exhibit. Refer to the exhibit. Company A established BGP sessions with several ISPs. A network engineer at the company must filter out all traffic except for routes that transit AS 152. The engineer configured the filtering policy “permit _152S_(_ [0.9])” on R1, but after applying the configuration, the engineer notices that other routes are still visible. Which action resolves the issue?
Refer to the exhibit. Refer to the exhibit A network engineer installed a new router (router 3) at the regional hub running MPLS services for scalability Router 3 is connected to the 10.44 4.0,'24. 10.44 5.024. 10 44.6.0/24. and 10 44 7 0/24 subnets The new router has been configured for OSPF area 2. and it is advertising the four connected networks. The engineer noticed that the same networks are listed as interarea summary routes, and they are being flooded into each area on the area borders Which action resolves the issue?