ExamGecko
Login
Home / Cisco / 300-610 / List of questions
Ask Question

Cisco 300-610 Practice Test - Questions Answers, Page 12

Add to Whishlist

List of questions

Question 111

Report Export Collapse

A customer requires a tool to manage Cisco network hardware. The solution must use secure communication using a secure network protocol, support the use of declarative language to manage the state of resources, and periodically pull changes to the controlled nodes. Which tool meets these requirements?

Ansible

Ansible

SaltStack

SaltStack

Puppet

Puppet

Nomir

Nomir

Suggested answer: C
asked 07/10/2024
Ali Abbas
32 questions

Question 112

Report Export Collapse

A cloud service provider provisioned four active/active data centers in various locations within the country at 50 miles between each data center. The data centers must provide redundant network infrastructure and always be available to customers.

Which two data center design steps must be used to meet these requirements? (Choose two.)

Provide application hosting services to customers from the closest data center.

Provide application hosting services to customers from the closest data center.

Implement active cluster in data centers 1 and 2 and backup in 3 and 4.

Implement active cluster in data centers 1 and 2 and backup in 3 and 4.

Use asynchronous replication between data centers 1 and 2.

Use asynchronous replication between data centers 1 and 2.

Deploy database services in data center 1 and application layer to other data centers.

Deploy database services in data center 1 and application layer to other data centers.

Configure application data replication to all backup data centers.

Configure application data replication to all backup data centers.

Suggested answer: A, E
asked 07/10/2024
fadi kako
47 questions

Question 113

Report Export Collapse

An engineer must design a DNS service available to multiple network zones as a shared service. The network zones are deployed as VRFs within the data center network and no firewall is available for communication between VRFs.

Which protocol is needed to implement the shared services?

BGP

BGP

OSPF

OSPF

ISIS

ISIS

VXLAN

VXLAN

Suggested answer: D
asked 07/10/2024
Mehr Khan
44 questions

Question 114

Report Export Collapse

Refer to the exhibit.

Cisco 300-610 image Question 114 113098 10072024010008000000

Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch.

The requirements are to redesign the storage network and keep these considerations in mind:

The traffic from each of the server must be redundant and isolated.

The design must tolerate hardware and software failures and upgrades of SAN fabric devices.

Which action must be taken to meet these requirements?

Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.

Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.

Create a SAN port channel that faces the storage device to sustain a link failure.

Create a SAN port channel that faces the storage device to sustain a link failure.

Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.

Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.

Place an additional Fibre Channel switch to create two physically independent storage fabrics.

Place an additional Fibre Channel switch to create two physically independent storage fabrics.

Suggested answer: D
asked 07/10/2024
YASSIR GHAZY
40 questions

Question 115

Report Export Collapse

A network architect designs the iSCSI-based storage area network solution. The iSCSI datastore must be designed with high availability, minimal downtime, and no single point of failure. The requirement is to fail over I/O to alternate paths based on

SCSI sense codes without reliance on network failures.

Which feature must be deployed to meet these requirements?

hardware-based flow control

hardware-based flow control

port security

port security

iSCSI multipath

iSCSI multipath

NIC teaming

NIC teaming

Suggested answer: C
asked 07/10/2024
Anas Hairuddin
28 questions

Question 116

Report Export Collapse

A network consultant reviews the requirements for the Storage Area Network (SAN) design. The proposed solution must offer a very efficient port usage and eliminate the need for a separate physical layer of switches and their associated ISLs.

The design is not expected to require future expansion.

Which SAN topology must be used to meet these requirements?

core-edge

core-edge

collapsed-core

collapsed-core

core-distribution-access

core-distribution-access

edge-core-edge

edge-core-edge

Suggested answer: A
asked 07/10/2024
Arun Samuel
50 questions

Question 117

Report Export Collapse

A storage administrator receives reports of network delays when database software attempts to access the storage array.

The virtual machines that host the database software are installed on different rack servers connected to the Cisco UCS

Fabric Interconnect domain. The existing SAN switches are connected to the Fabric Interconnects using two 8 Gb portchannel interfaces to connect the storage array.

The storage administrator has decided to deploy iSCSI storage with four 10 Gbps interfaces connected to the Cisco UCS

Fabric Interconnects.

Which deployment type resolves the problems with storage contention?

iSCSI storage with Cisco UCS Fabric Interconnect in the virtual port-channel mode

iSCSI storage with Cisco UCS Fabric Interconnect in the virtual port-channel mode

iSCSI storage with Cisco UCS Fabric Interconnect using an appliance port

iSCSI storage with Cisco UCS Fabric Interconnect using an appliance port

iSCSI storage appliance on Cisco UCS Fabric Interconnect uplink trunk port

iSCSI storage appliance on Cisco UCS Fabric Interconnect uplink trunk port

iSCSI storage appliance on Cisco UCS Fabric Interconnect in the storage end-host mode

iSCSI storage appliance on Cisco UCS Fabric Interconnect in the storage end-host mode

Suggested answer: C
asked 07/10/2024
jim eagleton
38 questions

Question 118

Report Export Collapse

An end user is experiencing network latency when accessing a database in a disaster recovery site. The monitoring team concluded that the database was writing simultaneously to the storage arrays on the primary and disaster recovery sites.

Which design resolves this issue?

asynchronous replication between data centers

asynchronous replication between data centers

synchronous replication between data centers

synchronous replication between data centers

FCoE tunnel between data center

FCoE tunnel between data center

FCIP tunneling between data center

FCIP tunneling between data center

Suggested answer: A
asked 07/10/2024
David Tirado
37 questions

Question 119

Report Export Collapse

Refer to the exhibit.

Cisco 300-610 image Question 119 113103 10072024010008000000

A customer must ensure that the interface on a switch has enough resources to sustain the line rate traffic during peak load.

Which action meets this requirement?

Change the rate mode to dedicated.

Change the rate mode to dedicated.

Set Transmit B2B credit to 16.

Set Transmit B2B credit to 16.

Change the port mode to NL.

Change the port mode to NL.

Increase the data field size to 9000 bytes.

Increase the data field size to 9000 bytes.

Suggested answer: A
asked 07/10/2024
Lucile Jeanneret
44 questions

Question 120

Report Export Collapse

An engineer must choose the World Wide Port Name for the Cisco UCS Fibre Channel virtual host bus adapter.

Which identifier must be used?

naa.600a09840691712159764d

naa.600a09840691712159764d

fe80::314e:4566:8702:bf3d

fe80::314e:4566:8702:bf3d

iqn.2021-08.com.acme:3xxx

iqn.2021-08.com.acme:3xxx

20:00:00:25:B5:97:c3:ac

20:00:00:25:B5:97:c3:ac

Suggested answer: D
asked 07/10/2024
Vipul Mehra
41 questions
Total 251 questions
Go to page: of 26
Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

Refer to the exhibit. A Cisco engineer is configuring a customer scenario with 2 x MDS 9000 switches 24 x UCS B200M6 blade servers. UCS 64S4 Fabric Interconnect in end-host mode and 3 x UCS 5108 server chassis with 2408 Fabric Extenders The engineer installs 6 x SQL Server 2019 on all blades and then notices that there are read and write latencies What is the best way to balance the utilization across the shared ports?
An engineer must design a solution to divide the workload across two different data centers and achieve redundancy in case of the failure of either data center Which solution must the engineer choose?
A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches. The Ethernet interconnection must use all redundant links and have no impact on the STP domain size. Which connectivity solution must be used?
An engineer develops a framework for automatic repetitive tasks needed to manage a Cisco Nexus 9000 Series Switch. The engineer plans to use a programmatic interface and must keep these considerations in mind. The customer's environment requires the script to authenticate before executing further actions. The customer's security requirements mandate the use of HTTP transport. The automation team is familiar with parsing messages encoded in XML or JSON format. Which solution meets these requirements?
An engineer must implement an iSCSI storage connectivity in the existing Cisco UCS environment. The environment is based on Cisco UCS С-Series rack server, Cisco Nexus 1000V Series Switches, and VMware ESXi hosts. The implementation must meet these requirements: Provide multipathing and high availability in the event of a critical path failure. Be cost-effective and not require the purchase of new equipment. Which two components must be selected to meet these requirements? (Choose two.)
An engineer working for a private telecommunication company with an employee ID 4419 90 979 is installing a pair of Nexus 7000 Series Switches and must deploy the solution with these requirements • The environment must be separated for test and production purposes • The separation should include control, data and management plane with fault domain isolation and improved security • The test environment needs only F2 series line cards and a maximum of 256 VLANs Which set of actions meets these requirements? A. Use VRF faQUMIife environments Configure allow feature set for both VRFs Enable limit-resource vlan minimum for the test VRF
An architect needs vendor-agnostic technology to orchestrate and automate a customer network with scripts. The technology must support running ad-hoc scripts from the CLI and support a deployment of scripts based on a large, readily available set of support libraries. Which technology must the architect choose?
An engineer must design a solution based on Cisco Nexus 7709 Switches. The solution must connect test and development network segments and separate the enterprise applications from the production network. The network security team requires routing instances and the IP stack to be completely separated from each other and for traffic between the environments to undergo a deep packet inspection. The development team also requests the ability to allocate additional physical interfaces from the Cisco Nexus 7709 device in each environment. Which solution meets these requirements?
A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?
A company data center requires a new disaster recovery solution to host critical services. The solution can sustain several hours of data loss because the services are routinely backed up to an offsite location. Also, the disaster recovery solution must provide 24-hour availability. Due to the strict policy requirements, the company wants to retain complete control of when the failover process occurs. Which solution meets these requirements?