ExamGecko
Login
Home / Cisco / 300-610 / List of questions
Ask Question

Cisco 300-610 Practice Test - Questions Answers, Page 14

Add to Whishlist

List of questions

Question 131

Report Export Collapse

A network engineer must design a data center network with four Cisco Nexus 7706 switches. The switches will be installed in primary and secondary data centers in vPC domains. The two data centers must be connected via Layer 2 links and provide the maximum throughput, redundancy, and avoid port-blocking spanning-tree design.

Which deployment model meets these requirements?

dual-sided single vPC

dual-sided single vPC

single-sided dual vPC

single-sided dual vPC

dual-sided dual vPC

dual-sided dual vPC

single-sided single vPC

single-sided single vPC

Suggested answer: C
asked 07/10/2024
David Wilson
43 questions

Question 132

Report Export Collapse

An engineer is implementing a Cisco UCS environment The requirements for the solution are for the MAC addresses to be learned only on the server-facing ports. The use of the Spanning Tree Protocol must be avoided. Also, the engineer must have deterministic traffic handling from blades to uplink ports. Which two settings must be selected to meet these requirements? (Choose two.)

end-host mode

end-host mode

dynamic pinning

dynamic pinning

NPIV mode

NPIV mode

static pinning

static pinning

switching mode

switching mode

Suggested answer: A, D
asked 07/10/2024
Nicholas Johnson
46 questions

Question 133

Report Export Collapse

An engineer is installing a Cisco Nexus 7000 Series Switch with F2-Series I/O Module. The company's strict security policy requires that the port be in-band. The engineer must also keep these considerations in mind:

The customer's security requirements mandate the use of a secure management mechanism that supports authentication and encryption.

The port should support management over IP.

Which port type must be used to meet these requirements?

management port

management port

console port

console port

connectivity management port

connectivity management port

Ethernet port

Ethernet port

Suggested answer: A
asked 07/10/2024
Bas Vogel
45 questions

Question 134

Report Export Collapse

An engineer is building a data center network with VXLAN EVPN. The requirement is to use multicast for the broadcast, unknown unicast, and multicast replication.

Which two VNI to multicast group mapping methods must be used to meet these requirements? (Choose two.)

many NVE to one multicast group

many NVE to one multicast group

one VNI to one multicast group

one VNI to one multicast group

many VNI to one multicast group

many VNI to one multicast group

one NVE to many multicast groups

one NVE to many multicast groups

many VNI to many multicast groups

many VNI to many multicast groups

Suggested answer: A, C
asked 07/10/2024
Inkisar Malik
44 questions

Question 135

Report Export Collapse

A data center uses Cisco Nexus 7000 Series Switch and contains two tenants, tenant A and tenant B.

Tenant A uses IP addresses in the 10.2.30.41/24 to 10.2.30.64/24 range.

Tenant B uses IP addresses in the 10.2.30.120/24 to 10.2.30.192/24 range.

The engineer must implement a solution that

Isolates the traffic for each tenant as separate routing data and control planes.

Physically partitions the Cisco Nexus device into separate multiple logical devices with separate management, failure domain isolation, and resource management. Which two technologies meet these requirements? (Choose two.)

VDC

VDC

vPC

vPC

VXLAN

VXLAN

VLAN

VLAN

VRF

VRF

Suggested answer: A, E
asked 07/10/2024
SERGIO FREITAS
41 questions

Question 136

Report Export Collapse

An engineer must design a solution based on Cisco Nexus 7709 Switches. The solution must connect test and development network segments and separate the enterprise applications from the production network. The network security team requires routing instances and the IP stack to be completely separated from each other and for traffic between the environments to undergo a deep packet inspection.

The development team also requests the ability to allocate additional physical interfaces from the Cisco Nexus 7709 device in each environment.

Which solution meets these requirements?

1. Create a VRF for the testing and development environments.

1. Create a VRF for the testing and development environments.

Use ACLs to control traffic between the two environments.

Use ACLs to control traffic between the two environments.

1. Enable new routing instances for the testing and development environments in the same VDC.

1. Enable new routing instances for the testing and development environments in the same VDC.

Control reachability by using firewall access policies.

Control reachability by using firewall access policies.

1. Assign a separate VDC for the testing and development environments.

1. Assign a separate VDC for the testing and development environments.

Place a firewall between the VDCs.

Place a firewall between the VDCs.

1. Create a separate VRF for the testing and development environments.

1. Create a separate VRF for the testing and development environments.

Control reachability by using firewall access policies.

Control reachability by using firewall access policies.

Suggested answer: C
asked 07/10/2024
Amol Wani
48 questions

Question 137

Report Export Collapse

A network engineer must create a Fibre Channel fabric QoS design for an existing data center. The solution must provide relative bandwidth guarantees to application traffic, control latency, and prioritize application traffic.

Which mechanism must be deployed to support these requirements?

traffic policing

traffic policing

traffic shaping

traffic shaping

traffic remarking

traffic remarking

traffic classification

traffic classification

Suggested answer: B
asked 07/10/2024
Mark David
49 questions

Question 138

Report Export Collapse

A customer connects a high-speed Fibre Channel storage array to a Cisco MDS 9000 Series Switch using an 8 Gbps interface.

Which action guarantees line rate traffic processing on the interface?

Set global buffering with B2B_credits for the interface.

Set global buffering with B2B_credits for the interface.

Set local buffering with B2B_credits for the interface.

Set local buffering with B2B_credits for the interface.

Configure the interface rate mode as dedicated.

Configure the interface rate mode as dedicated.

Configure the interface rate mode as shared.

Configure the interface rate mode as shared.

Suggested answer: C
asked 07/10/2024
Srikar Gude
35 questions

Question 139

Report Export Collapse

An engineer must design a Cisco HyperFlex solution to support a virtualized environment in a single data center location.

The design must consider these customer requirements:

a large-scale cluster with eight or more nodes distributed high-performance file system for virtualized servers high fault tolerance to multiple node failures Which action meets these objectives?

Configure data destaging and deduplication.

Configure data destaging and deduplication.

Implement a replication factor of four.

Implement a replication factor of four.

Enable logical availability zones.

Enable logical availability zones.

Create multiple datastores for storage of VM.

Create multiple datastores for storage of VM.

Suggested answer: B
asked 07/10/2024
Bob Tole
53 questions

Question 140

Report Export Collapse

A Cisco UCS chassis with several blade servers, a pair of IOMs, and a pair of Cisco UCS Fabric Interconnects are installed in a data center.

Which two high-availability architectures are recommended between the IOMs and fabric interconnects? (Choose two.)

One, two, four and eight links are supported to be used between each IOM and fabric interconnect.

One, two, four and eight links are supported to be used between each IOM and fabric interconnect.

IOM is connected to the fabric interconnect that is acting as fabric A, and IOM B is connected to the fabric interconnect that is acting as fabric B.

IOM is connected to the fabric interconnect that is acting as fabric A, and IOM B is connected to the fabric interconnect that is acting as fabric B.

Any combination of one to eight links are supported to be used between each IOM and fabric interconnect.

Any combination of one to eight links are supported to be used between each IOM and fabric interconnect.

The IOMs are connected with multiple straight and cross-connect links toward a pair of nonclustered fabric interconnects.

The IOMs are connected with multiple straight and cross-connect links toward a pair of nonclustered fabric interconnects.

Straight and cross-connect links should be used between the IOMs and fabric interconnects to offer higher availability.

Straight and cross-connect links should be used between the IOMs and fabric interconnects to offer higher availability.

Suggested answer: B, C
asked 07/10/2024
Ivan Dujmic
55 questions
Total 251 questions
Go to page: of 26
Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

Refer to the exhibit. A Cisco engineer is configuring a customer scenario with 2 x MDS 9000 switches 24 x UCS B200M6 blade servers. UCS 64S4 Fabric Interconnect in end-host mode and 3 x UCS 5108 server chassis with 2408 Fabric Extenders The engineer installs 6 x SQL Server 2019 on all blades and then notices that there are read and write latencies What is the best way to balance the utilization across the shared ports?
An engineer must design a solution to divide the workload across two different data centers and achieve redundancy in case of the failure of either data center Which solution must the engineer choose?
A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches. The Ethernet interconnection must use all redundant links and have no impact on the STP domain size. Which connectivity solution must be used?
An engineer develops a framework for automatic repetitive tasks needed to manage a Cisco Nexus 9000 Series Switch. The engineer plans to use a programmatic interface and must keep these considerations in mind. The customer's environment requires the script to authenticate before executing further actions. The customer's security requirements mandate the use of HTTP transport. The automation team is familiar with parsing messages encoded in XML or JSON format. Which solution meets these requirements?
An engineer must implement an iSCSI storage connectivity in the existing Cisco UCS environment. The environment is based on Cisco UCS С-Series rack server, Cisco Nexus 1000V Series Switches, and VMware ESXi hosts. The implementation must meet these requirements: Provide multipathing and high availability in the event of a critical path failure. Be cost-effective and not require the purchase of new equipment. Which two components must be selected to meet these requirements? (Choose two.)
An engineer working for a private telecommunication company with an employee ID 4419 90 979 is installing a pair of Nexus 7000 Series Switches and must deploy the solution with these requirements • The environment must be separated for test and production purposes • The separation should include control, data and management plane with fault domain isolation and improved security • The test environment needs only F2 series line cards and a maximum of 256 VLANs Which set of actions meets these requirements? A. Use VRF faQUMIife environments Configure allow feature set for both VRFs Enable limit-resource vlan minimum for the test VRF
An architect needs vendor-agnostic technology to orchestrate and automate a customer network with scripts. The technology must support running ad-hoc scripts from the CLI and support a deployment of scripts based on a large, readily available set of support libraries. Which technology must the architect choose?
An engineer must design a solution based on Cisco Nexus 7709 Switches. The solution must connect test and development network segments and separate the enterprise applications from the production network. The network security team requires routing instances and the IP stack to be completely separated from each other and for traffic between the environments to undergo a deep packet inspection. The development team also requests the ability to allocate additional physical interfaces from the Cisco Nexus 7709 device in each environment. Which solution meets these requirements?
A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?
A company data center requires a new disaster recovery solution to host critical services. The solution can sustain several hours of data loss because the services are routinely backed up to an offsite location. Also, the disaster recovery solution must provide 24-hour availability. Due to the strict policy requirements, the company wants to retain complete control of when the failover process occurs. Which solution meets these requirements?