Cisco 300-610 Practice Test - Questions Answers, Page 25

A networking team must implement a new management solution for the network devices at their organization. The solution must meet these requirements

* It must enable seamless monitoring, configuration, and troubleshooting while ensuring security and reliability.

* It must allow access to devices even if the production network is down.

* It must be easy to use and manage.

The company's budget is limited. Which implementation must the team perform to meet the requirements?

A Cisco engineer is configuring Cisco Nexus 7000 Series Switches To simplify initial configuration verification and vPC+/HSRP troubleshooting, the engineer configures the primary vPC+ peer device with the FHRP active router highest priority The primary FHRP device responds to ARP requests, even though the secondary vPC+ device also forwards the data traffic Which configuration enables the Layer 3 connectivity from each vPC+ peer device?

A Cisco engineer is discussing a data center design scenario that consists of 24 Cisco UCS B200M6 Wade servers. 2 Cisco UCS 6454 Fabric Interconnects, and 3 Cisco UCS 5108 server chassis In the proposed configuration, the server links, which are vNICs on the blades, are associated with a single uplink port Server-to-server Layer 2 traffic is locally switched, server-to-network traffic goes out on its pinned uplink port, and each server MAC address must be learned before traffic can be forwarded to it Which feature stipulates that traffic is forwarded to a server only if it is received on a pinned uplink port for this server?

A company's data center is currently running on a traditional SAN architecture with Cisco UCS C200 M5 Blade Servers, producing 1000 IOPS The SAN is becoming a performance bottleneck, so management decided to implement a new solution to provide better performance and scalability. The preferred solution must meet these requirements:

*Provide at least 10x the performance of the current SAN

*Provide up to 100 Gbps of throughput per node

*Be easily scalable to meet the future needs of the enterprise

Which solution must the company deploy to meet the requirements9

To help automate the vHBA configuration process, a network engineer is configuring vHBA template pairs on UCS The engineer is creating primary and secondary templates to define how vHBAs on a server connect to the SAN. Which fact about the template pair should the engineer consider for Its potential impact on service7

Refer to the exhibit. A Cisco engineer is configuring a PBR in a Cisco ACI data center scenario and plans to insert a transparent firewall. The APIC release is 4.1. the Cisco ACI fabric is configured to be the gateway for the servers and for the PBR node, and the Layer 4/ Layer 7 devices are deployed as Layer 1/ Layer 2 mode in the physical domain. Layer 1/Layer 2 PBR node interfaces arc also configured to be in a bridge domain and not in an L30ut. What is required for the consumer and provider connectors of the Layer 1/Layer 2 device for this scenario to work?

A network engineer is connecting a backup server to the given network The server has three available physical Ethernet interfaces - dual 1Gbps interfaces, plus a single 10Gbps interface - and all devices support virtual port channels The engineer must minimize backup time from hosts on the network, with a mandate for no single point of failure connectivity within the data center and the interfaces either active or passive Which deployment model must the engineer use?

Refer to the exhibit. A Cisco engineer is configuring a data center design scenario with Cisco MDS 90Q0 Series Switches. The cut-through routing mode is chosen for impf oved read operation performance. Each (SCSI host requires access lo storage through the IPS module. First, the engineer configures the TCP tuning parameters as enabled SACK, the maximum bandwidth of 1 Gbps. buffer size of 4096. keepalive timeout at 1s. and enables Path MTU. Then, the engineer must set the OoS of the ISCSI link. What is the maximum QoS value that must be set tor the ISCSI session?

Refer to the exhibit.

Refer to the exhibit. A customer requires a VXLAN fabric deployment with these requirements:

* DNS must be a shared service.

* Users will not require direct sharing of resources with other users.

* The deployment must use the least configuration intensive approach to achieve route leaking.

Which action must the customer take to meet these criteria?