Which two statements about VRF-Lite configurations are true? (Choose two.)

Different customers can have overlapping IP addresses on different VPNs

Each customer has its own private routing table.

They support the exchange of MPLS labels

Different customers can have overlapping IP addresses on different VPNs

They support a maximum of 512.000 routes

Each customer has its own dedicated TCAM resources

Each customer has its own private routing table.

Refer to Exhibit. Which statement about redistribution from BGP into OSPF process 10 is true?

Network 172.16.1.0/24 is not redistributed into OSPF.

Network 10.10 10.0/24 is not redistributed into OSPF

Network 172.16.1.0/24 is redistributed with administrative distance of 1.

Network 10.10.10.0/24 is redistributed with administrative distance of 20.

Which two statements about redistributing EIGRP into OSPF are true? (Choose two)

The redistributed EIGRP routes appear as type 5 LSAs in the OSPF database

The redistributed EIGRP routes appear as OSPF external type 2 routes in the routing table

The redistributed EIGRP routes appear as type 3 LSAs in the OSPF database

The redistributed EIGRP routes appear as type 5 LSAs in the OSPF database

The administrative distance of the redistributed routes is 170

The redistributed EIGRP routes appear as OSPF external type 1

The redistributed EIGRP routes as placed into an OSPF area whose area ID matches the EIGRP autonomous system number

The redistributed EIGRP routes appear as OSPF external type 2 routes in the routing table

Refer to the exhibit. Which routes from OSPF process 5 are redistributed into EIGRP?

E1 and E2 subnets matching access list TO-OSPF

E1 and E2 subnets matching prefix list TO-OSPF

only E2 subnets matching access list TO-OSPF

only E1 subnets matching prefix listTO-OS1

Users were moved from the local DHCP server to the remote corporate DHCP server. After the move, none of the users were able to use the network.Which two issues will prevent this setup from working properly? (Choose two)

The DHCP server IP address configuration is missing locally

The route to the new DHCP server is missing

Auto-QoS is blocking DHCP traffic.

The DHCP server IP address configuration is missing locally

802.1X is blocking DHCP traffic

The broadcast domain is too large for proper DHCP propagation

The route to the new DHCP server is missing

Which is statement about IPv6 inspection is true?

It team and secures binding for stateless autoconfiguration addresses in Layer 2 neighbor tables.

It teams and secures bindings for stateless autoconfiguration addresses in Layer 3 neighbor tables

It learns and secures bindings for stateful autoconfiguration addresses in Layer 3 neighbor tables

It teams and secures bindings for stateful autoconfiguration addresses in Layer 2 neighbor tables

It team and secures binding for stateless autoconfiguration addresses in Layer 2 neighbor tables.

What is the output of the following command: show ip vrf ?

Displays IP routing table information associated with a VRF

Show's routing protocol information associated with a VRF.

Displays the ARP table (static and dynamic entries) in the specified VRF

Refer to the exhibit. The server for the finance department is not reachable consistently on the 200.30.40.0/24 network and after every second month it gets a new IP address. Which two actions must be taken to resolve this Issue? (Choose two.)

Configure the server with a static IP address and default gateway.

Configure the router to exclude a server IP address.

Configure the server to use DHCP on the network with default gateway 200 30.40.100.

Configure the server with a static IP address and default gateway.

Configure the router to exclude a server IP address.

Configure the server to use DHCP on the network with default gateway 200 30.30.100.

Configure the router to exclude a server IP address and default gateway.

An engineer is configuring a network and needs packets to be forwarded to an interface for any destination address that is not in the routing table. What should be configured to accomplish this task?

set ip next-hop verify-availability

Which protocol does MPLS use to support traffic engineering?

Resource Reservation Protocol (RSVP)

Tag Distribution Protocol (TDP)

Resource Reservation Protocol (RSVP)

Label Distribution Protocol (LDP)

Refer to the exhibit. R1 is being monitored using SNMP and monitoring devices are getting only partial information. What action should be taken to resolve this issue?

Modify the access list to add a second line to allow udp any any eq snmp

Modify the CoPP policy to increase the configured exceeded limit for SNMP.

Modify the access list to include snmptrap.

Modify the CoPP policy to increase the configured CIR limit for SNMP.

Modify the access list to add a second line to allow udp any any eq snmp

Refer to the exhibit. To provide reachability to network 10.1.1.0 /24 from R5, the network administrator redistributes EIGRP into OSPF on R3 but notices that R4 is now taking a ........... path through R5 to reach 10.1.1.0/24 network. Which action fixes the issue while keeping the reachability from R5 to 10.1.1.0/24 network?

Change the administrative distance of the external EIGRP to 90.

Apply the outbound distribution list on R5 toward R4 in OSPF.

Change the administrative distance of OSPF to 200 on R5.

Redistribute OSPF into EIGRP on R4

Refer to the exhibit. R1 is connected with R2 via GigabitEthernet0/0, and R2 cannot ping R1. What action will fix the issue?

Fix IP Event Dampening configured on the interface.

Fix route dampening configured on the router.

Replace the SFP module because it is not supported.

Fix IP Event Dampening configured on the interface.

Correct the IP SLA probe that failed.

Refer to the exhibit. An IT staff member comes into the office during normal office hours and cannot access devices through SSH Which action should be taken to resolve this issue?

Modify the access list to use the correct IP address.

Configure the correct time range.

Modify the access list to correct the subnet mask

Configure the access list in the outbound direction.

Refer to the exhibit. Which two actions should be taken to access the server? (Choose two.)

Modify the access list to deny the route to 192.168.2.2.

Add a floating static route to reach to 192.168.2.2 with administrative distance higher than OSPF

Modify the access list to add a second line of permit ip any

Modify the access list to deny the route to 192.168.2.2.

Modify distribute list seq 10 to permit the route to 192.168.2.2.

Add a sequence 20 in the route map to permit access list 1.

Add a floating static route to reach to 192.168.2.2 with administrative distance higher than OSPF

Refer to the exhibit. A user cannot SSH to the router. What action must be taken to resolve this issue?

Configure ip ssh source-interface loopback0

Refer to the exhibit. A client is concerned that passwords are visible when running this show archive log config all.Which router configuration is needed to resolve this issue?

MASS-RTR(config-archive-log-cfg)#hidekeys

MASS-RTR(config-archive-log-cfg)#password encryption aes

MASS-RTR(config)#aaa authentication arap

MASS-RTR(config)#service password-encryption

MASS-RTR(config-archive-log-cfg)#hidekeys

Refer to the exhibit. An engineer wanted to set a tag of 30 to route 10 1.80.65/32 but it failed How is the issue fixed?

Modify route-map ospf-to-eigrp permit 10 and match prefix-list ccnp2.

Modify route-map ospf-to-eigrp permit 30 and match prefix-list ccnp2.

Modify route-map ospf-to-eigrp permit 10 and match prefix-list ccnp2.

Modify prefix-list ccnp3 to add 10.1.64.0/20 le 24

Modify prefix-list ccnp3 to add 10.1.64.0/20 ge 32

What does the PE router convert the Ipv4 prefix to within an MPLS VPN?

VPN-IPv4 prefix combined with the 64-bit route distinguisher

48-bit route combining the IP and PE router-id

prefix that combines the ASN, PE router-id, and IP prefix

eBGP path association between the PE and CE sessions

How are MPLS Layer 3 VPN services deployed?

The label switch path must be available between the local and remote PE routers.

The RD and RT values must match under the VRR

The RD and RT values under a VRF must match on the remote PE router

The import and export RT values under a VRF must always be the same.

The label switch path must be available between the local and remote PE routers.

Refer to the exhibit. The R1 and R2 configurations are: The neighbor is not coming up. Which two sets of configurations bring the neighbors up? (Choose two.)

R2 ip route 10.1.1.1 255.255.255.255 192.168.1.1 ! router bgp 200 neighbor 10.1.1.1 disable-connected-check neighbor 10.1.1.1 update-source loopback 0

R1 ip route 10.1.1.2 255.255.255.255 192.168.1.2 ! router bgp 100 neighbor 10.1.1.2 disable-connected-check neighbor 10.1.1.2 update-source Loopback0

R2 ip route 10.1.1.1 255.255.255.255 192.168.1.1 ! router bgp 200 neighbor 10.1.1.1 tti-security hops 1 neighbor 10.1.1.1 update-source loopback 0

R2 ip route 10.1.1.1 255.255.255.255 192.168.1.1 ! router bgp 200 neighbor 10.1.1.1 disable-connected-check neighbor 10.1.1.1 update-source loopback 0

R2 ip route 10.1.1.2 255.255.255.255 192.168.1.2 ! router bgp 100neighbor 10.1.1.2 ttl-security hops 1 neighbor 10.1.1.2 update-source loopback 0

R1 ip route 10.1.1.2 255.255.255.255 192.168.1.2 ! router bgp 100 neighbor 10.1.1.1 ttl-security hops 1 neighbor 10.1.1.2 update-source loopback 0

R1 ip route 10.1.1.2 255.255.255.255 192.168.1.2 ! router bgp 100 neighbor 10.1.1.2 disable-connected-check neighbor 10.1.1.2 update-source Loopback0

Refer to the exhibit. An engineer identifier a Layer 2 loop using DNAC. Which command fixes the problem in the SFD9300- 1 switch?

spanning-tree portfast bpduguard

spanning-tree loopguard default

spanning-tree portfast bpduguard

What are two functions of LDP? (Choose two.)

It advertises labels per Forwarding Equivalence Class.

It uses Forwarding Equivalence Class

It is defined in RFC 3038 and 3039.

It requires MPLS Traffic Engineering.

It advertises labels per Forwarding Equivalence Class.

It must use Resource Reservation Protocol.

It uses Forwarding Equivalence Class

Refer to the exhibit. A network administrator is using the DNA Assurance Dashboard panel to troubleshoot an OSPF adjacency that failed between Edge_NYC interface GigabitEthernet1/3 with Neighbor Edge_SNJ. The administrator observes that the neighborship is stuck in exstart state. How does the administrator fix this issue?

Configure to match the OSPF interface MTU settings on both routers.

Configure to match the OSPF interface speed and duplex settings on both routers.

Configure to match the OSPF interface MTU settings on both routers.

Configure to match the OSPF interface unique IP address and subnet mask on both routers.

Configure to match the OSPF interface network types on both routers.

Refer to the exhibit. All the serial between R1, R2, and R3 have the Same bandwidth. User on the 192.168.1.0/24 network report slow response times while they access resource on network 192.168.3.0/24. When a traceroute is run on the path. It shows that the packet is getting forwarded via R2 to R3 although the link between R1 and R3 is still up. What must the network administrator to fix the slowness?

Change the Administrative Distance of EIGRP to 5.

Add a static route on R1 using the next hop of R3.

Redistribute theR1 route to EIGRP

Cisco 300-410 Practice Test 3 - Free Online Exam Prep & Questions

Refer to the following output:

Router#show ip nhrp detail

10.1.1.2/8 via 10.2.1.2, Tunnel1 created 00:00:12, expire 01:59:47

TypE. dynamic, Flags: authoritative unique nat registered used

NBMA address: 10.12.1.2

What does the authoritative flag mean in regards to the NHRP information?

A.

It was obtained directly from the next-hop server.

B.

Data packets are process switches for this mapping entry.

C.

NHRP mapping is for networks that are local to this router.

D.

The mapping entry was created in response to an NHRP registration request.

E.

The NHRP mapping entry cannot be overwritten.

Cisco 300-410 Practice Test 3

Question

Cisco 300-410 Practice Tests

Practice Tests