An engineer must configuration a backup and restore of Cisco UCS Manager during the weekend maintenance windows. The configuration must be restored to its original state on Monday morning. The end users can make changes only to the Service Profile configuration. Which set of actions meets these requirements?

Schedule a logical backup to run at the start of every weekend and schedule the import of the backup to run on Monday morning.

Schedule a system backup to run at the start of every weekend and manually import the backup on Monday morning.

Schedule a system backup to run at the start of every weekend and schedule the import of the backup to run on Monday morning

Schedule a logical backup to run at the start of every weekend and manually import the backup on Monday morning.

Schedule a logical backup to run at the start of every weekend and schedule the import of the backup to run on Monday morning.

An engineer must implement a new VRF that permits communication between all endpoint groups (EPGs) by default. The new EPGs and bridge domains (BDs) that are created in the new VRF must not require additional configuration to permit traffic between the newly created EPGs or BDs. Which action accomplishes this goal'

Place all EPGs in the preferred group.

Provide and consume a permit any contract on the VRF level

Create a VRF in the common tenant.

Place all EPGs in the preferred group.

An engineer must implement access control tor Cisco UCS Manager. The configuration must meet these requirements.All users and user groups must be configured using Active Directory.User1 must have full access to the Fabric Interconnect infrastructure and network security operationsUser1 must have full access to the storage operations configuration.Which action must be performed on Cisco UCS to meet the requirements?

Create a custom role tor the user and LDAP for the rote-mappings for Active Directory.

Create a custom rote tot the user and RADIUS for the role-mapping for Active Directory.

Execute a built-in role for the user and LDAP lor the role-mapping for Active Directory.

Create a custom role tor the user and LDAP for the rote-mappings for Active Directory.

Execute a built-in role for the user and RADIUS for the role-mapping for Active Directory.

A network administrator is using the Cisco ESA with Cisco AMP to upload files to the cloud for analysis. The network is congested and is affecting communication. How will the Cisco ESA handle any files which need analysis?

The file is queued for upload when connectivity is restored.

Cisco AMP calculates the SHA-256 fingerprint, caches it, and periodically attempts the upload.

The Cisco ESA immediately makes another attempt to upload the file.

The file is queued for upload when connectivity is restored.

What is a benefit of using Cisco Tetration?

It collects telemetry data from servers and then uses software sensors to analyze flow information.

It collects near-real time data from servers and inventories the software packages that exist on servers.

It collects policy compliance data and process details.

It collects enforcement data from servers and collects interpacket variation.

A network engineer must migrate a Cisco WSA virtual appliance from one physical host to another physical host by using VMware vMotion. What is a requirement for both physical hosts?

The hosts must have access to the same defined network.

The hosts must run Cisco AsyncOS 10.0 or greater.

The hosts must have access to the same defined network.

The hosts must run different versions of Cisco AsyncOS.

The hosts must use a different datastore than the virtual appliance

A Cisco Nexus 7000 Series switch runs VXLAN, and interface Ethernet 7/30 is configured as a trunk port. Which command set configures the switch to act as a gateway for VLAN 50?interface Ethernet7/30no switchportno shutdownservice instance 1 vnino shutdown

encapsulation profile vni VSI_50_TO_500 dot1q 50 vni 500bridge-domain 50 member vni 500 interface Bdi50 ip address 10.50.50.51/24

encapsulation profile VSI_50_TO_500 default

encapsulation profile vni VSI_50_TO_500 dot1q 500 vni 50 bridge-domain 500 member vni 50 interface Vlan500 ip address 10.50.50.51/24

encapsulation profile vni VSI_50_TO_500 dot1q 500 vni 50 bridge-domain 500 member vni 50 interface Bdi500 jp address 10.50.50.51/24

encapsulation profile vni VSI_50_TO_500 dot1q 50 vni 500bridge-domain 50 member vni 500 interface Bdi50 ip address 10.50.50.51/24

encapsulation profile vni VSI_50_TO_500 dot1q 50 vni 500 bridge-domain 50 member vni 500 interface Vlan50 ip address 10.50.50.51/24

What is a benefit of using the Cisco UCS Lightweight upgrade feature?

The firmware version of a component is updated only when it has been modified.

Security updates are scheduled with the next reboot of the fabric interconnects.

All servers are rebooted to push the latest updates.

The firmware version of a component is updated only when it has been modified.

A soft reboot is available for the fabric interconnects.

An engineer needs to install a new package on a Cisco Nexus 9000 Series Switch. What is the impact of running the install commit <filename> command on the switch?

The package is used after the switch is restarted.

The switch is restarted after the upgrade is complete

The package is used after the switch is restarted.

The previous package that was in use is deleted from bootflash.

The package is used in the running configuration.

An engineer is implementing traffic monitoring for a server vNIC that is configured with fabric failover enabled. The requirement is for the traffic to be sent to an analyzer, even during a failure of one of the fabric interconnects. The analyzer is connected to unconfigured Ethernet ports on both fabric interconnects. Which configuration accomplishes this task?

Create two traffic monitoring sessions with different names, one per fabric. Connect an analyzer on each FI as the destination for the monitoring session local to the FI

Create two traffic monitoring sessions with different names, one per fabric Connect the analyzer connected to FI-B as the destination for both monitoring sessions.

Create two traffic monitoring sessions with the same name, one per fabric. Connect an analyzer on each Fl as the destination for the monitoring session local to that FI.

Create two traffic monitoring sessions with the same name, one per fabric. Connect the analyzer connected to FI-A as the destination for both monitoring sessions.

Create two traffic monitoring sessions with different names, one per fabric. Connect an analyzer on each FI as the destination for the monitoring session local to the FI

A network engineer must deploy a configuration backup policy to the Cisco UCS Manager. The file generated from this backup must have a snapshot of the entire system that should be used to restore the system during disaster recovery. The backup file must be transferred insecurely by using the TCP protocol. Which configuration backup settings meet these requirements?

Type: All Configuration Protocol: SCP

Type: Logical Configuration Protocol: SFTP

Type: System Configuration Protocol: TFTP

Refer to the exhibit. An engineer configures port security on a Cisco Nexus 9000 Series Switch. The requirement is to prevent any newly learned MAC addresses from forwarding traffic on the interface. Also, the already learned MAC addresses must not be affected by the changes. Which configuration meets these requirements?

switchport port-security violation protect

switchport port-security violation shutdown

switchport port-security violation isolate

switchport port-security violation protect

switchport port-security violation restrict

Which two features are used to allow a nondisruptive upgrade for the ISSU process? (Choose two.)

connectivity management processor

A network engineer must configure a Cisco MDS switch to use the local user database for console access if all AAA servers are unreachable. Which configuration should be applied to complete this task?

aaa authentication login console fallback error local

aaa authentication login default fallback error local

aaa authentication login console fallback error local

aaa authentication login default local

aaa authentication login console local

Refer to the exhibit. Which command needs to be added to the line starting with the 'file' keyword to have the generated running-config file with the name 'fusion-config_' and current date?

string(Cfusion-config_') + date)

Refer to the exhibit. A network engineer must configure an authentication solution for Cisco UCS with these conditions:* Two-factor authentication must be enabled for all UCS user authentication.* All AAA packets must be encrypted and use TCP port 49 to establish communication.Which set of actions needs these requirements?

Remove the LDAP provider. Create a TACACS+ provider in user management.

Create the LDAP provider. Change the LDAP group rule in an LDAP provider.

Create the RADIUS group mapping. Change the RADIUS group rule in a RADIUS provider.

Remove the LDAP provider. Create a TACACS+ provider in user management.

Delete the LDAP group mapping. Create a RADIUS provider in user management.

Refer to the exhibit. An engineer is configuring a Cisco MDS 9000 Series Switch for the first time. After the initial setup process, the name server at IP 192.168.10.11 is missing from the configuration. Which set of actions completes the configuration?

Enter yes at step 21 to edit the configuration. Add the line dns-server 192.168.10.11.

Enter no at step 21 and reinitialize the installer. Press the Esc key to access ROMMON mode.

Enter no at step 21 and reload the switch. Configure the advanced IP options.

Enter yes at step 21 to edit the configuration. Add the line dns-server 192.168.10.11.

Enter yes at step 21 and log in. Modify the startup configuration DNS

An engineer is implementing a Cisco ACI fabric and must use static VLAN range as part of a VMM deployment. The static VLAN must be incorporated into the dynamic VLAN pool. The existing VLAN pool is set for dynamic allocation. Which action accomplishes this goal?

Add a static VLAN allocation range to the VLAN pool.

Add the VLAN to the pool configured with Inherit Allocation Mode from parent.

Change the existing VLAN pool to static allocation mode.

Add a static VLAN allocation range to the VLAN pool.

Create a static reservation within the dynamic VLAN pool.

A network engineer connects the CNA interface of a server to a switch. The switch must bring down all of the VLANs on the interface that are not enabled for FCoE, but the VLANs that are enabled for FCoE should continue to carry SAN traffic without interruption. Which configuration should be applied to the switch to achieve this objective?

switch(config)# interface Ethernet 2/1 switch(config-if)# shutdown force

switch(config)# interface Ethernet 2/1 switch(config-if)# shutdown Ian

switch(config)# interface vfc 2 switch(config-if)# shutdown Ian

switch(config)# Interface Ethernet vfc 2 switch(config-if)# shutdown force

switch(config)# interface Ethernet 2/1 switch(config-if)# shutdown force

Cisco 350-601 Practice Test 10 - Free Online Exam Prep & Questions

Refer to the exhibit.

Cisco 350-601 image Question 361 117091 10102024233033000000

Refer to the exhibit. An engineer is troubleshooting intermittent connectivity issues between the client PC and the DHCP server. What does the last package captured from the Cisco Nexus 2000 Series Switch indicate?

Become a Premium Member for full access

Unlock Premium Member

Cisco 350-601 Practice Test 10

Question

Cisco 350-601 Practice Tests

Practice Tests