An engineer is performing an ISSU upgrade on the Cisco MDS 9000 Series Switch. What is the impact on the control plane of the switch?

It remains up throughout the update.

It remains down until the next reboot.

It remains up throughout the update.

It remains down for more than 80 seconds but less than 140 seconds.

It is down for less than 80 seconds.

What is a characteristic of the NFS protocol?

It uses remote procedure calls with TCP/IP for transport.

It is used for booting Cisco UCS B-Series servers.

It is used to access a storage array at a block level.

It uses UDP and HTTP as its transport.

It uses remote procedure calls with TCP/IP for transport.

Refer to the exhibit. Refer to the exhibit. Software downgrade is required on a Cisco Nexus 7000 Series Switch. What is displayed when this command is executed?

compatibility of software in the system bootflash file

features and commands that are removed automatically from the configuration

features that are enabled automatically after the downgrade

compatibility of software in the system bootflash file

impact of a software upgrade in ISSU and chassis reload

An infrastructure architect is analyzing the deployment type for an application. Several companies must be able to operate the application environment and integrate it with a third-party protocol. The development team also must have maximum control over their development environment, Including the operating system used, Python interpreter, and corresponding libraries. Which cloud deployment solution meets these requirements?

community cloud Infrastructure as a Service

public cloud Storage as a Service

private cloud Platform as a Service

hybrid cloud Software as a Service

community cloud Infrastructure as a Service

What is a benefit of independent resource scaling in Cisco HyperFlex hybrid architecture?

flexible expansion of compute, caching, and capacity

remote booting of converged servers

multivendor converged node hardware support

support for compute nodes with third-party storage

Refer to the exhibit. Refer to the exhibit. Which action completes the vPC domain implementation?

Add the vPC member ports to the vPC channel group.

Allow VLANs on the vPC peer link member interfaces.

Include the VRF management on the vPC domain.

Configure the system MAC on the vPC domain.

Add the vPC member ports to the vPC channel group.

Refer to the exhibit. Refer to the exhibit During a vPC peer switch reload, there is packet loss between the server and the router Which action must be taken to prevent this behavior during future reloads?

Increase the vPC delay restore timer.

Set the routed uplink ports of the Cisco Nexus peers as orphans.

Increase the vPC delay restore timer.

Decrease the OSPF hello and dead interval timers.

Disable vPC ARP synchronize on the vPC peers.

Refer to the exhibit. Refer to the exhibit. A network engineer is configuring the Smart Call Home feature on a Cisco Nexus Series Switch. An email must be generated that contains the last 100 lines of the log every time a new piece of hardware is inserted into the chassis. Which command must be added to the configuration to receive the email?

alert-group Linecard-Hardware user-def-cmd show logging last 100

destination-profile Operations alert-group Inventory

destination-profile Operations message-level 2

alert-group Operations user-def-cmd show logging last 100

Which feature is supported with an In-Service Software Upgrade on a Cisco Nexus 9000 Series Switch?

nondisruptive upgrades via nonstop forwarding

configuration changes during an upgrade

nondisruptive upgrades via nonstop forwarding

zero downtime downgrades via dual supervisor modules

upgrades to Individual modules and line cards

What is the impact of an EPLD upgrade on a Cisco MDS 9000 Series Switch?

The upgrade process disrupts only the module that is being upgraded.

The active supervisor traffic is disrupted.

The upgrade disrupts the management connectivity to the switch.

The standby supervisor module reloads multiple times.

The upgrade process disrupts only the module that is being upgraded.

An engineer must configure the HSRP protocol between two Cisco Nexus 9000 Series Switches This configuration is present on Nexus A. The final HSRP configuration must meet these requirementsThe HSRP communication must be secured on both switchesBoth switches must support more than 300 groupsWhich two commands must be added to the HSRP configuration on Nexus A to complete these requirements? (Choose two)

authenticate md5 key-chain NHRP-KEYS

Cisco 350-601 Practice Test 7 - Free Online Exam Questions 241-280

An engineer must configure the order in which the server attempts to boot from available boot device types using Cisco Integrated Management Controller (Cisco IMC). The engineer must change the boot order configuration during the setup and apply the new requirements multiple times. The requirement is to change the Cisco IMC actual boot order so it is different from the configured boot order. Which setting accomplishes this goal?

Become a Premium Member for full access

Unlock Premium Member

Cisco 350-601 Practice Test 7

Question

Cisco 350-601 Practice Tests

Practice Tests