Cisco Nexus 9000 Series Switches are configured with LACP protocol and default aging timers. What is the impact on the LACP peer during an ISSU upgrade?

The LACP peer session remains up.

The LACP peer connection terminates.

The LACP peer session remains up.

The LACP peer renegotiates the adjacency.

The LACP peer connection resets.

Refer to the exhibit. An engineer installs a new Cisco UCS B-Series server. The requirement is to install an operating system on a LUN that is provided by the Fibre Channel storage array. Which two steps must be configured in the boot policy to accomplish this goal? (Choose two.)

Configure a SAN Boot Target with a WWPN

Disable Enforce vNIC^HBA/ISCSI Name

Configure a SAN Boot Target with a WWPN

Set Boot Order to External USB and LAN Boot

Create (SCSI VNlCs and add Local LUN

An engineer must perform a POAP deployment of a Cisco Nexus 9000 Series Switch The switch must automatically receive its software image and configuration file upon power-on. Also, only UDP is permitted between the Nexus 9000 switch and the server that hosts the Cisco NX-OS system images Which set of actions completes the configuration'

Enable option 67. Define TFTP transfer protocol

Enable option 43 Define HTTP transfer protocol.

Enable option 46. Define TFTP transfer protocol

Enable option 35. Define HTTP transfer protocol.

An engineer must integrate Cisco ACI with a VMware vSphere environment. The requirement is to use a VMware Distributed Virtual Switch and to assign the encapsulation VLAN of the EPG from the VLAN pool. Which configuration set accomplishes this goa?

Create a VMM domain association under the EPGs Create a VLAN pool with dynamic alocated VLANs.

Create a VMM domain association under the EPGs Create a VLAN pool with static alocated VLANs.

Create a physical domain association under the EPGs Create a VLAN pool with static alocated VLANs.

Create a physical domain association under the EPGs. Create a VLAN pool with oVnarmc alocated VLANs

Create a VMM domain association under the EPGs Create a VLAN pool with dynamic alocated VLANs.

An engineer must allow communication between the APIC controller and an OpenStack OpFlex agent. The agent is running on a compute node directly plugged to a Cisco ACI leaf switch. The engineer must enable and extend Infra VLAN on the port facing the compute and extend the Infra VLAN to the host. Which action must be taken to meet these requirements?

Enable the Infra VLAN on the Attachable Access Entity Profile.

Enable the Infra VLAN on the Interface Profile policy

Enable the Infra VLAN on the Attachable Access Entity Profile.

Add the infra VLAN via the physical domain.

Add the infra VLAN via the VMM domain.

Refer to the exhibit. Which command must be used to restore configuration changes made by disabling the PIM feature and skipping any errors?Refer to the exhibit. Which command must be used to restore configuration changes made by disabling the PIM feature and skipping any errors?

rollback running-config checkpoint system-fm-pim-best-effort

rollback running-config checkpoint new-checkpoint stop-at-first-failure

rollback running-config checkpoint new-checkpoint verbose

rollback running-config checkpoint system-fm-pim-best-effort

rollback running-config checkpoint system-fm-pim atomic

An engineer troubleshoots an Fibre Channel deployment on a Cisco MDS 9000 Series Switch. What does this output indicate about port channel 1?

Port channel 1 is configured to be an ISL.

Port channel 1 is configured to connect to a host bus adapter.

Port channel 1 is configured to connect to an NPIV switch.

Port channel 1 is configured to connect to an NPV switch.

An engineer must perform backup and restore of the Cisco UCS Manager configuration. The configuration must be stored on a remote server via XML encoding. The backup must store the configurations of the chassis. FEX, rack servers. lOMs, and blade server. Which set of actions accomplishes these goals?

Perform a ful state configuration backup and run the restore procedure.

Perform a logical configuration backup and run the replace import method.

Perform a ful state configuration backup and run the restore procedure.

Perform a system configuration backup and run the merge import method

Perform an all configuration backup and run the system restore procedure.

An engineer must optimize ARP responses and reduce unnecessary ARP broadcasts over the VXLAN/EVPN fabric. Which action accomplishes these tasks?

Configure suppress-arp within the VXLAN VNI configuration under the VTEP NVE interface.

Configure ip proxy-arp under the VLAN SVI associated with the VXLAN VNI.

Configure ip proxy-arp within the VXLAN VNI configuration under the VTEP NVE interface.

Configure suppress-arp within the VXLAN VNI configuration under the VTEP NVE interface.

Configure suppress-arp under the VLAN SVI associated with the VXLAN VNI.

A new user with access privileges in the Finance department moves to a new Admin department. The user must have access privileges to the Admin department data and applications inside the Cisco UCS Manager Which set of changes must be implemented in Cisco UCS Central for the user to acquire the privileges?

Create a new locale Admin and add the Admin department to the Admin locale. Delete the old locale

Create an Admin user account and remove the authentication service for the Finance privileges.

Disable the Finance user account and add the authentication service for the Admin privileges.

Create a new locale Admin and add the Admin department to the Admin locale. Delete the old locale

Finance and remove the Finance department from the Finance locale.

Refer to the exhibit An engineer must mirror the traffic on a switch The engineer locates the server port that requires monitoring on switch1, but the packet sniffer is on switch2 The engineer must configure the source IP address on switch1 Much command accomplishes this goal?

monitor erspon origin ip-address 209.165.200.225

monitor session 10 type erspan-source

monitor erspon origin ip-address 209.165.200.225

An engineer is implementing the Cisco ACI fabric and wants to reduce the amount of TCAM resources consumed by the fabric The engineer also needs to ensure that all EPGs m a VRF consume the same services Which action should be taken to meet these requirements?

Configure a single contract provided and consumed in all EPGs

Configure preferred groups in the VRF for al EPGs

An engineer must deploy a Cisco UCS C-Series Server with a single VIC 1455 integrated into a Cisco UCS Manager cluster. Two fiber connections are available, and the deployment has no fabric extenders. Which set of actions accomplishes this goal?

Reset the system using Cisco IMC to its factory default settings. Attach VIC port 1 and 3 to Fabric Interconnects.

Configure VIC attached ports as Uplink ports on fabric interconnects. Insert 1000Base-T RJ45 SFP in VIC port 1 and 3.

Reset the system using Cisco IMC to its factory default settings. Insert 1000Base-T RJ45 SFP in VIC port 1 and 3.

Configure VIC attached ports as Uplink ports on fabric interconnects. Attach VIC port 1 and 3 to Fabric Interconnects.

An engineer must configure device aliases for a Cisco MDS 9000 Series Switches-based SAN fabric. The configuration must meet these requirements:* The engineer must be prompted before the changes are committed to the database.* Pending changes must be explicitly displayed on the console.Which command accomplishes this task?

device-alias distribute diffs-only

Refer to the exhibit. An engineer configures an FCoE connection between a Cisco UCS and a Cisco Nexus 9000 Series Switch. The UCS FI-Aconnects to the Nexus switch using interface e1/12. All relevant configurations have been completed on the Nexus switch to support FCoEdeployment. Which action must be taken on Cisco UCS Manager to complete the configuration?

Change the Transport Type to FCoE.

Trunk VLAN 500 on interface e1/12.

Create a Virtual Fibre Channel Interface.

Change the Transport Type to FCoE.

Configure an FCoE uplink interface.

An engineer must configure a Cisco MDS 9000 Series Switch to store generated log messages to a file. The file must store logs of the severity of 'warning' and above, and the file size must not exceed 20,000 bytes. Which command accomplishes this task?

logging logfile Local 4 size 20000

logging logfile LogFile 5 size 2000

logging logfile messages 2 size 2500

logging logfile Local 4 size 20000

logging logfile Logs 3 size 160000

Cisco 350-601 Practice Test 11 - Free Online Exam Questions 401-440

An engineer needs to connect Cisco UCS Fabric Interconnect (FI) to an external storage array. Due to budget limitations, the engineer must connect a Cisco UCS FI directly to an FC storage port. Which two actions must be taken to complete this connection? (Choose two.)

Become a Premium Member for full access

Unlock Premium Member

Cisco 350-601 Practice Test 11

Question

Cisco 350-601 Practice Tests

Practice Tests