An engineer performs a Firmware Auto Install upgrade through the Cisco UCS Manager. Which two Cisco UCS components are upgraded in the Install Server Firmware stage? (Choose two)

Cisco UCS C-Series Rack-Mount Server

Cisco UCS B-Series Blade Server

Cisco UCS C-Series Rack-Mount Server

Cisco UCS B-Series Blade Server

What is an advantage of NAS compared to SAN?

It functions in an existing IP environment.

It offers enhanced NFS features.

It offers enhanced security features

It functions in an existing IP environment.

It provides lossless throughput.

Which two actions are needed to configure a single Cisco APIC controller for Cisco ACI fabric for the first time? (Choose two.)

Configure the first Cisco APIC controller

Register the switches that are discovered through LLDP.

Register the APIC that is connected to the switch.

Configure the first Cisco APIC controller

Configure the leaf switch where the Cisco APIC is connected, using CLI to allow APIC connectivity

Register the switches that are discovered through LLDP.

Register all leaf and spine switches

Which two actions should be performed before upgrading the infrastructure and firmware of multiple UCS blades? (Choose two)

Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 10% available space

Get Full State and All Configuration backup files before beginning the upgrade

Verify if the bootflash on the fabric interconnects m the Cisco UCS has at least 15* available space

Enable Smart Call Home feature during the firmware upgrade process

Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 10% available space

Run the Check Conformance feature to verify that all your components are running the compatible firmware version after the upgrade

Get Full State and All Configuration backup files before beginning the upgrade

A customer requires a solution to orchestrate the configuration of storage arrays, firewalls, and Cisco ACI networking. Additionally, the orchestration product must support open automation and a service catalog. Which solution meets these requirements?

Cisco Data Center Network Manager

Cisco Workload Optimization Manager

An engineer needs to connect Cisco UCS Manager to an external storage array. Due to budget limitations, the engineer must connect a Cisco UCS manager directly to an FC storage port. Which two actions must be taken to complete this connection? (Choose two)

Configure the fabric interconnect in FC switch mode

Create the required VSAN in the SAN cloud

Configure the fabric interconnect in FC switch mode

Create a storage connection policy

Set FC zoning to disabled when creating the VSAN

Configure the fabric interconnect in end host mode

Create the required VSAN in the SAN cloud

An engineer must perform a nondisruptive software upgrade on a dual supervisor Cisco Nexus 7000 series switch. What is the cause of the upgrade being disruptive?

Change to the configuration settings or the network connections during the upgrade process

The show install all impact command is not issued before the upgrade

The kickstart image is installed by using the Install all kickstart image system image command

Attempt to simultaneously upgrade more than three cards

Change to the configuration settings or the network connections during the upgrade process

Which two statements describe the process of upgrading an EPLD on a Cisco MUS 9000 Series Switch? (Choose two)

EPLDs are capable to be upgraded without replacing the hardware

EPLD upgrades are capable to be completed without powering down the module during the upgrade

EPLDs are capable to be upgraded without replacing the hardware

The CPLDs for all the modules on a switch must be upgraded at the same time

An upgrade verification identifies the impact of each EPLD upgrade

EPLDs are only capable to be upgraded to the latest FH. D image

EPLD upgrades are capable to be completed without powering down the module during the upgrade

Refer to the exhibit. Server1 is connected to a Cisco Nexus 9000 Series Switch via a 1-Gb port channel. The storm control is applied to the Eth0 device with a zero percent value. What does the switch do to traffic that traverses the switch interfaces during the streaming window that exceeds the bandwidth of the interfaces?

drops all of the excess traffic

An engineer must generate a checkpoint of the running configuration on a Cisco Nexus Switch. The checkpoint file name must be called 'before_maintenance' and should be used for recovering the switch to its pre- maintenance state. The rollback of the checkpoint to running configuration should only occur if no errors occur. Which two configuration commands must be used to meet these requirements? (Choose two.)

checkpoint file before_maintenance

rollback running-conflg file before_maintenance atomic

rollback checkpoint rile before_maintenance stop-at-first-failure

rollback running-conflg checkpoint before.maintenance

checkpoint file before_maintenance

rollback running-conflg file before_maintenance atomic

Refer to the exhibit. Refer to the exhibit The ASA 1 acts as a Layer 3 gateway for all servers. The servers lose the gateway connectivity when the vPC peer links go down and the vPC keepalive remains up. Which action improves the high availability in the network?

Enable the vPC peer gateway feature on the vPC devices

Create a static port channel with two links from each firewall to the switch

Activate the vPC orphan-port suspend feature on the switch ports connected to the firewall

Implement the IP reoVect feature on the vPC devices

Enable the vPC peer gateway feature on the vPC devices

Refer to the exhibit. Refer to the exhibit. An engineer must deploy 70 Cisco Nexus 9000 Series Switches in a new environment The requirement is to use Cisco DCNM as a management tool to deploy, manage and monitor the new switches. In addition. DCNM is configured with a zero-touch POAP feature to facilitate fabric creation Which action meets these requirements?

Configure an IP helper address on interface VLAN 10 of the management switch

Configure SNMP on the new Nexus switches to send SNMP messages to the DCNM server

Create a SPAN session on the management switch to send the traffic from VLAN 10 to Ethernet 1/1.

Configure an IP helper address on interface VLAN 10 of the management switch

Create common credentials on all of the new Nexus switches

A storage administrator notices an increasing number of storage targets that unexpectedly reach capacity, causing periodic service interruptions The administrator must now create and submit a daily report of the environment that shows the status of the storage targets with the highest capacities Which solution provides this information?

SolarWinds with Slow Drain Analysis

Cisco Intersight with Slow Drain Analysis

Refer to the exhibit. Refer to the exhibit The communication between the web server and the application server experiences poor performance The network engineer must collect the traffic between the two servers, including the payload for more investigation The collected data must be sent from the remote site to the headquarters. Which action accomplishes this goal?

Configure an ERSPAN session between N5K-1 and N5K-2.

Configure a SPAN session between N5K-1 and N5K-2

Configure SNMP on N5K-1 to send the data to the monitor server

Configure NetFlow on N5K-1 to send the data to the monitor server

Which two actions must be taken to directly connect a Fibre Channel storage array to a Cisco UCS domain? (Choose two.)

Create a Storage Connection Policy

Create a new vHBA dedicated to the storage array

Configure a Fibre Channel port channel

Create a Storage Connection Policy

Configure the Fibre Channel poet as a Fibre Channel storage port

Refer to the exhibit. Refer to the exhibit. SVR-A in EPG-A/BD-A fails to reach SVR-B in EPG-B/BD-B. Which two conditions should be verified to analyze the traffic between the two EPGs? (Choose two.)

A contract exists between EPG-A and EPG-B and allows the traffic.

SVR-B is learned as an endpoint in EPG-B from Node-112.

A contract exists between EPG-A and EPG-B and allows the traffic.

Limit Endpoint Learning is disabled on the bridge domain for EPG-B.

SVR-B is learned as an endpoint in EPG-B from Node-112.

EPG-A and EPG-B are excluded from the preferred group.

The bridge domain for EPG-B floods ARP packets.

Cisco 350-601 Practice Test 8 - Free Online Exam Prep & Questions

An engineer is implementing the Cisco ACI fabric and must create two different vPCs from leaf switches A and B. The vPCs are deployed as follows:

* vPC 1 encompasses ports Eth 1 /1 on leaf A and B and connects to server 1.

* vPC 2 encompasses port Eth1/2 on leaf A and B and connects to server 2.

A leaf switch profile listing leaves A and B is already configured Which ACI object must be created to meet these requirements?

Become a Premium Member for full access

Unlock Premium Member

Cisco 350-601 Practice Test 8

Question

Cisco 350-601 Practice Tests

Practice Tests