Which statement about the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation is true?

The FCoE Initialization protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fibric-provided MAC address.

The FCoE Initialization Protocol uses the burned-in MAC address of the converged network adapter for all FCoE operations.

The FCoE Initialization protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fibric-provided MAC address.

The FCoE Initialization Protocol uses 01.00.0C as the first 24 bits of the MAC address and appends a 24-bit Fibre Channel ID to derive a full 48-bit FCoE MAC address.

FCoE does not use a MAC address. The FCoE Initialization Protocol is used to acquire a Fibre Channel ID, and the address is used for all FCoE communications in the same way as Fibre Channel Protocol.

An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action must be taken?

NPIV must be enabled on the upstream switch.

The FCNS database must be disabled in the fabric.

A port channel must be configured to the upstream switch.

All switches in the fabric must be Cisco MDS switches.

NPIV must be enabled on the upstream switch.

Which two statements describe modifying Cisco UCS user accounts? (Choose two.)

Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect.

Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP.

Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect.

The admin account is used only to log on by using SSH.

The password of the user account must contain a minimum of 10 characters.

Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP.

The password of the user account expires in 30 days.

An engineer must ensure fabric redundancy when implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action enables fabric redundancy?

Connect the NPV devices to multiple upstream switches.

Add a port channel to upstream switches.

Configure the NPV devices to use on external FLOGI database.

Use TE ports to connect to upstream switches.

An engineer is converting a Cisco MDS switch to support NPIV mode. What should be considered when implementing the solution?

It must be enabled globally on all VSANs.

It must be enabled on VSAN 1 only.

It must be enabled globally on all VSANs.

It requires mapping of external interface traffic.

It requires the FLOGI database to be disabled.

Refer to the exhibit. What is the result of implementing this configuration?

The Fibre Channel interface is configured for synchronization distribution.

The Fibre Channel interface is configured for SPAN.

The Fibre Channel interface is configuration for source distribution.

The Fibre Channel interface is configured for FSPF.

An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two)

Configure the switchport monitor under interface fc2/2

Configure session type fc under monitor session 1.

Configure the switchport monitor under interface fc2/2

Configure the switchport mode SD under interface tc2/1.

Configure switchport speed 4000 under interface fc2/2.

Configure session type fc under monitor session 1.

Configure the switchport mode SD under interface fc2/2.

What is a recommended design choice in a topology for multipathing iSCSI traffic?

dual initiators to a single target with bonded interfaces

single initiator to dual targets

initiators and targets in separate subnets

dual initiators to a single target with bonded interfaces

two NICs bended together on the initiator

Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.)

check the impact of the upgrade using the show install all impact command

free up space on the USB3 device by deleting old Cisco NX-OS image files

make the primary supervisor the active supervisor

What is an advantage of using Ansible for automation as compared to puppet and chef?

Ansible perform automation without installing a software agent on the target node.

Ansible automates the enforcement of configuration settings.

Ansible perform automation without installing a software agent on the target node.

Ansible configures a set of CLI commands on a device by using NETCONF.

Ansible abstracts a scenario so that set of configuration setting can be used across multiple operating systems.

A POAP-enabled Cisco Nexus switch will not enter POAP mode. Which two conditions should be verified? (Choose two.)

The switch is in bootup process.

No startup configuration is available.

Bootflash must contain a special directory named POAP with poap.py file.

The switch is in bootup process.

No startup configuration is available.

The license file is missing on the switch.

No Cisco NX-OS image is present on the bootflash.

AN engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch.event manager applet Backup-config event timer watchdog time 1800 name timer event cli match ''copy running-config startup-config''what is the result of applying this configuration?

It generates an error because no action is mentioned.

It saves the running configuration every 1800 seconds.

It generates an error because no action is mentioned.

It executes the copy running-config startup-config command.

It blocks the copy running-config startup-config command.

An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is named kr2016 needs to be created. The cluster IP address is 10.68.68.68.Which command set creates this certificate request?

UCS-A# scope security UCS-A /security # scope keyring kr2016 UCS-A /security/keyring # create certreq ip 10.68.68.68 subject-name sjc2016 UCS-A /security/keyring* # commit-buffer

UCS-A # scope keyring kr2016 UCS-A /keyring # create certreq 10.68.68.68 sjc2016 UCS-A /keyring* # commit-buffer

UCS-B # scope keyring kr2016 UCS-B /keyring # create certreq ip 10.68.68.68 subject-name sjc2016 UCS-B /keyring* # commit-both

UCS-B# scope security UCS-B /security # scope keyring kr2016 UCS-B /security/keyring # set certreq 10.68.68.68 sjc2016 UCS-B /security/keyring* # commit-both

UCS-A# scope security UCS-A /security # scope keyring kr2016 UCS-A /security/keyring # create certreq ip 10.68.68.68 subject-name sjc2016 UCS-A /security/keyring* # commit-buffer

Port security is enabled on a Cisco MDS 9000 series Switch. Which statement is true?

Any devices currently logged in must be added manually to the device databased.

Cisco Fabric Services must be disabled before enabling port security.

Port security can be enabled only globally and affects all VSANs.

Auto-learning is always enabled automatically when port security is enabled.

Any devices currently logged in must be added manually to the device databased.

When a strict CoPP policy is implemented, which statement describes an event during which packets are dropped?

A ping sweep is performed on a network that is connected through a switch.

Fifteen SSH sessions remain connected to the switch.

A large system image is copied to a switch by using the default VRF.

A ping sweep is performed on a network that is connected through a switch.

A web server that is connected to a switch is affected by a DDoS attack.

Refer to the exhibit. What is the result of implementing this configuration?

The switch queries the TACACS+ server by using an encrypted text PAP login.

The TACACS+ server uses the type-6 encrypted format.

The switch queries the TACACS+ server by using a clear text PAP login.

The timeout value on the TACACS+ server is 10 seconds.

The switch queries the TACACS+ server by using an encrypted text PAP login.

An engineer is configuring AAA authentication on an MDS 9000 switch. The LDAP server is located under the IP 10.10.2.2. The data sent to the LDAP server should be encrypted. Which command should be used to meet these requirements?

Idap-server host 10.10.2.2 enable-ssl

Idap server host 10.10.2.2 key SSL_KEY

Idap-server 10.10.2.2 key SSL_KEY

Refer to the exhibit. Which action is taken to ensure that the relay agent forwards the DHCP BOOTREQUEST packet to a DHCP server?

Configure the interface of the DHCP server as untrusted.

Configure the IP address of the DHCP server.

Verify the DHCP snooping bindings.

A network administrator must perform a system upgrade on a Cisco MDS 9000 Series Switch. Due to the recent changes by the security team:* The AAA server is unreachable.* All TCP communication between the MDS 9000 Series Switch and AAA servers is disabled.Which actions must be used to perform the upgrade?

Log in locally to the MDS 9000 Series Switch using a network-admin role and download the upgrade files from the remote TFTP server.

Log in locally to the MDS 9000 Series Switch using a server-admin role and download the upgrade files from the remote FTP server.

Log in to a server storing the upgrade files remotely using a server-admin role and download the files to the MDS 9000 Series Switch using SFTP.

Log in to a server storing the upgrade files remotely using a network-admin role and download the files to the MDS 9000 Series Switch using HTTP.

An engineer must implement a VXLAN-based data center interconnect. The long-distance transport provided by a service provider is IP-based,supports a maximum MTU of 1554 bytes, and does not support outbound traffic replication. Which action must be take to build the data center interconnect?

Announce host reachability over BGP.

Configure a route map to associate the IPs of the remote VTEPs.

Create an IP access list and associate it with VNI to replicate traffic to remote VTEPs.

Announce host reachability over BGP.

Implement BGP EVPN ingress replication.

Refer to the exhibit. Refer to the exhibit. What happens to the broadcast traffic when it reaches aggregation switches?

Agg-1 switch prevents broadcast packets received on the vPC peer link from exiting the switch on ports Eth2M and Eth2/5

Only Agg-1 switch receives broadcast packets and does not forward to the peer link on Agg-2 switch.

Agg-1 switch prevents broadcast packets received on the vPC peer link from exiting the switch on ports Eth2M and Eth2/5

Agg-2 switch receives broadcast packets and stops forwarding to the peer link on Agg-1 switch.

Agg1 and Agg2 switches receive broadcast packets and does not forward them to me peer link or the port channel

An engineer must configure OSPFv2 connectivity between a pair of Cisco Nexus switches. The connection between the switches must meet these requirements:Use unicast for updates.Use decentralized communication of updates.Full adjacency between switches.Which configuration is needed to meet these requirements?

interface with a type of p2p network

stub area between the neighbors

filter list between the neighbors

virtual link between the neighbors

An engineer must perform a backup operation of the Cisco UCS system. The backup must be transferred to a secure location using UDP and must contain information about VLANs, VSANs, and other policies. Also, the operations team requires the backup file to be in a human-readable format. Which configuration set meets these requirements?

Type: Logical configuration Protocol: TFTP

Type: System configuration Protocol: SCP

Type: Logical configuration Protocol: TFTP

Type: All configuration Protocol: FTP

Type: Full state Protocol: SFTP

A customer undergoes an IT security review assessment. The auditor must have read-only access to the Cisco Nexus 9000 Series Switch to perform the configuration review. The customer implements this security role for the auditor:role name auditrule 1 permit command *rule 2 - Output omitted -username auditor password C4SAFF0B96EB0045$c0 role auditWhich configuration snippet must complete the configuration?

deny command configure terminal

A Cisco ACI engineer must configure an access port on a Cisco ACI leaf switch. The access policy should be configured so that it supports L30ut connectivity concurrently with several EPGs that are mapped to this interface with the static port method. How should the access policy be configured?

by linking the interface policy group to multiple Attachable Access Entity Profiles

with a single Attachable Access Entity Profile that is linked to the corresponding routed domain and physical domain

with two interface policy groups that are linked to the same interface profile port selector

by mapping a single physical domain, mapped to the L3out and EPG interfaces

Cisco 350-601 Practice Test 6 - Free Online Exam Prep & Questions

Question 1 / 40

Which product includes prebuilt templates that can be used to customize fabric deployments?

Cisco ACI

Cisco UCS Manger

Cisco data Center Network Manger

Cisco Tetration

Comment (0)

Cisco 350-601 Practice Test 6

Question

Cisco 350-601 Practice Tests

Practice Tests