Home / Microsoft / MB-320

Microsoft MB-320 Practice Test - Questions Answers, Page 7

Question list

List of questions

Question 61

(0)

SIMULATION You are a functional consultant for Contoso Entertainment System USA (USMF). You need to configure the system to ensure that production purchases are grouped by purchase agreement. To

Question 62

(0)

SIMULATION You are a functional consultant for Contoso Entertainment System USA (USMF). You need to configure the system to ensure that planned master orders generated by Material Requirements Pla

Question 63

(0)

SIMULATION You are a functional consultant for Contoso Entertainment System USA (USMF). You need to schedule the Material Requirements Planning (MRP) master plan to run nightly at 03:00 (UTC-8).

Question 64

(0)

HOTSPOT A company implements Dynamics 365 for Finance and Operations. You run a master plan each week. You need to resolve the issue in the scenario. What should you do? To answer, select the ap

Question 65

(0)

DRAG DROP You are the quality assurance manager of a pharmaceuticals company. One of your customers has requested to only receive batches of item B0001 that have an acid concentration between 5.5%

Question 66

(0)

DRAG DROP You are the product manager at a distribution company. You are responsible for managing product compliance standards and reporting. Chemical product, C0001 can be sold in all parts of th

Question 67

(0)

HOTSPOT A company produces lotions for pain relief and uses Dynamics 365 for Finance and Operations. You have been provided the following information for a new relieving lotion. Use the drop-

Question 68

(0)

DRAG DROP You are the product manager at a paint manufacturing company. Paint base is produced in 100 gallon batches. The paint base can be packaged in 1 gallon, 5 gallon, and 10 gallon containers.

Question 69

(0)

DRAG DROP A company implements Dynamic 365 for Finance and Operations. You run the latest master plan. You observe invalid results. You need to set up tracing for the master plan. In which order

Question 70

(0)

HOTSPOT You are a manufacturing consultant helping a client test out different bill of material (BOM) and route consumption options when starting production orders. Material and labor consumption a

Related questions

DRAG DROP A skateboard manufacturer uses route operations to schedule resources and estimate units per hour. All products use the sample sub assembly item and resource sanding process. You observe an increase in the number of units a sanding belt resource can produce. The production schedule is now inaccurate due to the number of units the sanding belt line can produce. You must make a permanent change to the number of units the resource can produce for all future orders. You need to adjust the process quantity on the route operation. Which three actions should you perform in sequence? To answer, move the appropriate actions form the list of actions to the answer area and arrange them in the correct order.

You are responsible for product and formula maintenance for a paint manufacturer. You create a formula for white paint and add its lines. When the formula size increases or an ingredient changes, the quantity of the pigment ingredient must be adjusted proportionately. You need to set up the formula line for the pigment. Which formula feature should you use?

You produce 100 total units of finished goods. The amount of material used to produce the goods is the equivalent amount of material needed to produce 105 finished goods. The company must track variances in material compared to the original estimated amount. You must only use one picking list journal for each production order. You need to post a picking list that accounts for the material required to produce 105 finished goods. What should you do?

HOTSPOT You are the production scheduler for a manufacturing company. You have run the Resource Group Capacity report as shown in the Resource Group 21 Capacity exhibit. (Click the Resource Group 21 Capacity tab). After reviewing that report, you run Resource Capacity reports as shown in the Resource 2101 and 2102 Capacity exhibits. (Click the 2101 Capacity and 2102 Capacity tabs.) You run the Gantt chart report as shown in the Gantt exhibit to determine the production orders scheduled on the resources. (Click the Gantt tab.) You need to determine the method to schedule the production lines. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

You are responsible for training the operations staff on production transactions in Dynamics 365 Supply Chain Management. The company uses backflushing for material consumption principles. You need to train the operators on how to report unintended scrap. What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

SIMULATION You are a functional consultant for Contoso Entertainment System USA (USMF). You need to assign a cost of 1,000 US dollars to the night shift. To complete this task, sign in to Dynamics 365 portal. You must complete Task 1 before completing this task. Task 1 is the creation of a new cost category named NightShift for the night shift.

You are a process engineer evaluating Lean vs. Discrete processing. You want to convert a Kanban item. The item has the following Lean setup: The setup uses a Lean schedule group with a throughput ratio = 2. The process activity tied to production flow has the following runtime activity times: time = 3 min, per quantity = 1. The work cell capacity has a model type of Throughput and an average throughput quantity of 60 per a capacity period of standard workday (8-hour day). The throughput is 10 per hour. You need to set up a Discrete operation to mirror the item's production flow activity. What should you do?

A company is implementing Dynamics 365 Supply Chain Management in their manufacturing environment. The manufacturing process uses formulas to direct material consumption on the batch orders. During production some items in the formula must be consumed automatically from the production area, while some must be picked with their actual consumption reported on a pick list. You need to determine which setup method is used for formula lines to allow for the desired mixed method picking processes. What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

DRAG DROP You need to set up the system to calculate the overhead rates automatically for production. Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

A company implements manufacturing in Dynamics 365 Supply Chain Management. The company wants to efficiently produce products comprised of different order types. You need to select the appropriate production plan. Which production process should you use for the production run?

Question 61

SIMULATION

You are a functional consultant for Contoso Entertainment System USA (USMF).

You need to configure the system to ensure that production purchases are grouped by purchase agreement.

To complete this task, sign in to Dynamics 365 portal.

Explanation

Show Answer Comment (0)

Question 62

SIMULATION

You are a functional consultant for Contoso Entertainment System USA (USMF).

You need to configure the system to ensure that planned master orders generated by Material Requirements Planning (MRP) contain trade agreements.

To complete this task, sign in to Dynamics 365 portal.

Explanation

Show Answer Comment (0)

Question 63

SIMULATION

You are a functional consultant for Contoso Entertainment System USA (USMF).

You need to schedule the Material Requirements Planning (MRP) master plan to run nightly at 03:00 (UTC-8).

To complete this task, sign in to Dynamics 365 portal.

Explanation:

Show Answer Comment (0)

Question 64

HOTSPOT

A company implements Dynamics 365 for Finance and Operations.

You run a master plan each week.

You need to resolve the issue in the scenario.

What should you do? To answer, select the appropriate option in the answer area.

NOTE: Each correct selection is worth one point.

Show Answer Comment (0)

Question 65

DRAG DROP

You are the quality assurance manager of a pharmaceuticals company.

One of your customers has requested to only receive batches of item B0001 that have an acid concentration between 5.5% - 10.5%.

You need to set up the customer specific batch attribute to track percent acid for B0001.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in correct order.

Show Answer Comment (0)

Question 66

DRAG DROP

You are the product manager at a distribution company. You are responsible for managing product compliance standards and reporting.

Chemical product, C0001 can be sold in all parts of the United States except for the state of California.

You need to set up these compliance requirements for C0001.

Which four actions should be performed in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Show Answer Comment (0)

Question 67

HOTSPOT

A company produces lotions for pain relief and uses Dynamics 365 for Finance and Operations.

You have been provided the following information for a new relieving lotion.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

NOTE: Each correct selection is worth one point.

Show Answer Comment (0)

Question 68

DRAG DROP

You are the product manager at a paint manufacturing company. Paint base is produced in 100 gallon batches. The paint base can be packaged in 1 gallon, 5 gallon, and 10 gallon containers.

You want to use consolidated batch orders for the bulk paint base item. You need to set up the items and formulas to allow for consolidated batch orders.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Show Answer Comment (0)

Question 69

DRAG DROP

A company implements Dynamic 365 for Finance and Operations. You run the latest master plan. You observe invalid results.

You need to set up tracing for the master plan.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

Show Answer Comment (0)

You are a manufacturing consultant helping a client test out different bill of material (BOM) and route consumption options when starting production orders. Material and labor consumption are to be completed before Report as finish.

You are running a production order with BOM lines that have a Flushing principle set to Start. The Automatic Route Consumption Runtime has been set to Yes.

You have set up the default Start user options for all production orders as shown in the exhibit below.

Show Answer Comment (0)

Total 203 questions

5 6 7 8 9

Go to page: of 21