Cisco 350-501 Practice Test - Questions Answers, Page 2

Disable Cisco Express Forwarding globally

Delete the static router ID

Enable MPLS LDP on the interface

Configure the both keyword to enable LDP globally

MPLS

LDP neighbor

global

interface

It automatically provisions monitors, and manages traffic across Layer 0 to Layer 3

It minimizes human error configuring converged networks

It supports dynamic wavelength restoration in Layer 0

It provides multivendor configuration capabilities for Layer 3 to Layer 1

The neighbor relationship is down because the two routers are configured with different area types

The neighbor relationship is down because the two routers are in the same subnet.

The neighbor relationship is up because R2 is level 1 and level 2 router.

The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area

It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 and the VPNv4 address family

It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 without additional configuration

It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 and the VPNv4 address family

It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 without additional configuration.

The interface on the OSPF peer must use the same key ID and key value as the configured interface

The interface on the OSPF peer may have a different key ID, but it must use the same key value as the configured interface

The OSPF peer must be configured as an OSPF stub router

The OSPF peer must use clear-text authentication

The router must have TDP configured for the send-label command to operate

The neighbor router receives at least four labels from this router

The router sends BGP labels for its prefixes to this peer

The router sends only a label for the prefix for LoopbackO.

^

[^]

+

$

192.168.0.1

192.168.0.3

192.168.0.4

192.168.0.5