Refer to the exhibit. An engineer must create a configuration that executes the show run command and then terminates the session when user CCNP legs in. Which configuration change is required?

Add the autocommand keyword to the username command

Add the access-class keyword to the username command

Add the access-class keyword to the aaa authentication command

Add the autocommand keyword to the username command

Add the autocommand keyword to the aaa authentication command

Wireless users report frequent disconnections from the wireless network. While troubleshooting a network engineer finds that after the user a disconnect, the connection re-establishes automatically without any input required. The engineer also notices these message logs . Which action reduces the user impact?

increase the dynamic channel assignment interval

increase the AP heartbeat timeout

increase the dynamic channel assignment interval

What is used to perform OoS packet classification?

the TOS field in the Layer 3 header

the Options field in the Layer 3 header

the Type field in the Layer 2 frame

the Flags field in the Layer 3 header

the TOS field in the Layer 3 header

Refer to the exhibit. After configurating an IPsec VPN, an engineer enters the show command to verify the ISAKMP SA status. What does the status show?

Peers have exchanged keys, but ISAKMP SA remains unauthenticated.

ISAKMP SA is authenticated and can be used for Quick Mode.

Peers have exchanged keys, but ISAKMP SA remains unauthenticated.

VPN peers agreed on parameters for the ISAKMP SA

ISAKMP SA has been created, but it has not continued to form.

Refer to the exhibit. Which configuration allows Customer2 hosts to access the FTP server of Customer1 that has the IP address of 192.168.1.200?

ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 globalip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 globalip route 192.168.1.0 255.255.255.0 Vlan10ip route 172.16.1.0 255.255.255.0 Vlan20

ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 Customer2ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customerl

ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 Customerlip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customer2

ip route vrf Customerl 172.16.1.1 255.255.255.255 172.16.1.1 globalip route vrf Customer 192.168.1.200 255.255.255.0 192.168.1.1 globalip route 192.168.1.0 255.255.255.0 Vlan10ip route 172.16.1.0 255.255.255.0 Vlan20

How does the RIB differ from the FIB?

The RIB is used to create network topologies and routing tables. The FIB is a list of routes to particular network destinations.

The FIB includes many routes a single destination. The RIB is the best route to a single destination.

The RIB includes many routes to the same destination prefix. The FIB contains only the best route

The FIB maintains network topologies and routing tables. The RIB is a Iist of routes to particular network destinations.

A network engineer is configuring Flexible Netflow and enters these commands Sampler Netflow1 Mode random one-out-of 100 Interface fastethernet 1/0 Flow-sampler netflow1 Which are two results of implementing this feature instead of traditional Netflow? (Choose two.)

CPU and memory utilization are reduced.

The number of packets to be analyzed are reduced

CPU and memory utilization are reduced.

Only the flows of top 100 talkers are exported

The data export flow is more secure.

The number of packets to be analyzed are reduced

The accuracy of the data to be analyzed is improved

Refer to the exhibit. What is the Json syntax that is formed from the data?

{"Name": "Bob Johnson", "Age": 75, "Alive": true, "Favorite Foods": ["Cereal", "Mustard", "Onions"]}

{Name: Bob Johnson, Age: 75, Alive: true, Favorite Foods: [Cereal, Mustard, Onions]}

{"Name": "Bob Johnson", "Age": 75, "Alive": true, "Favorite Foods": ["Cereal", "Mustard", "Onions"]}

{"˜Name': "˜Bob Johnson', "˜Age': 75, "˜Alive': True, "˜Favorite Foods': "˜Cereal', "˜Mustard', "˜Onions'}

{"Name": "Bob Johnson", "Age": Seventyfive, "Alive": true, "Favorite Foods": ["Cereal", "Mustard", "Onions"]}

What is a fact about Cisco EAP-FAST?

It does not require a RADIUS server certificate.

It requires a client certificate.

It operates in transparent mode.

What is the data policy in a Cisco SD-WAN deployment?

Set of statements that defines how data is forwarded based on IP packet information and specific VPNs

list of ordered statements that define node configurations and authentication used within the SDWAN overlay

Set of statements that defines how data is forwarded based on IP packet information and specific VPNs

detailed database mapping several kinds of addresses with their corresponding location

group of services tested to guarantee devices and links liveliness within the SD-WAN overlay

Refer to the exhibit. What is the effect of this configuration?

The device will authenticate all users connecting to vty lines 0 through 4 against TACACS+

When users attempt to connect to vty lines 0 through 4, the device will authenticate them against TACACS+ if local authentication fails

The device will authenticate all users connecting to vty lines 0 through 4 against TACACS+

The device will allow users at 192.168.0.202 to connect to vty lines 0 through 4 using the password ciscotestkey

The device will allow only users at 192.166.0.202 to connect to vty lines 0 through 4

What is the function of a VTEP in VXLAN?

encapsulate and de-encapsulate traffic into and out of the VXLAN fabric

provide the routing underlay and overlay for VXLAN headers

dynamically discover the location of end hosts in a VXLAN fabric

encapsulate and de-encapsulate traffic into and out of the VXLAN fabric

statically point to end host locations of the VXLAN fabric

An engineer is concerned with the deployment of new application that is sensitive to inter-packet delay variance. Which command configures the router to be the destination of jitter measurements?

Router(config)# ip sla responder udp-echo 172.29.139.134 5000

Router(config)# ip sla responder udp-connect 172.29.139.134 5000

Router(config)# ip sla responder tcp-connect 172.29.139.134 5000

Router(config)# ip sla responder udp-echo 172.29.139.134 5000

Router(config)# ip sla responder tcp-echo 172.29.139.134 5000

Which method creates an EEM applet policy that is registered with EEM and runs on demand or manually?

event manager applet ondemand event none action 1.0 syslog priority critical msg 'This is a message from ondemand'

event manager applet ondemand event register action 1.0 syslog priority critical msg 'This is a message from ondemand'

event manager applet ondemand event manual action 1.0 syslog priority critical msg 'This is a message from ondemand'

event manager applet ondemand event none action 1.0 syslog priority critical msg 'This is a message from ondemand'

event manager applet ondemand action 1.0 syslog priority critical msg 'This is a message from ondemand'

Refer to the exhibit. Which two commands are needed to allow for full reachability between AS 1000 and AS 2000? (Choose two)

R2#no network 10.0.0.0 255.255.255.0

R2#network 19.168.0.0 mask 255.255.0.0

R1#network 19.168.0.0 mask 255.255.0.0

R2#no network 10.0.0.0 255.255.255.0

R2#network 19.168.0.0 mask 255.255.0.0

R2#network 209.165.201.0 mask 255.255.192.0

R1#no network 10.0.0.0 255.255.255.0

What is a benefit of data modeling languages like YANG?

They provide a standardized data structure, which results in configuration scalability and consistency.

They enable programmers to change or write their own application within the device operating system.

They create more secure and efficient SNMP OIDs.

They make the CLI simpler and more efficient.

They provide a standardized data structure, which results in configuration scalability and consistency.

Refer to exhibit. VLANs 50 and 60 exist on the trunk links between all switches All access ports on SW3 are configured for VLAN 50 and SW1 is the VTP server Which command ensures that SW3 receives frames only from VLAN 50?

SW3(config)#vtp mode transparent

SW1 (config >»vtp mode transparent

Refer to the exhibit. What does the error message relay to the administrator who is trying to configure a Cisco IOS device?

A NETCONF request was made for a data model that does not exist.

The device received a valid NETCONF request and serviced it without error.

A NETCONF message with valid content based on the YANG data models was made, but the request failed.

The NETCONF running datastore is currently locked.

How are the different versions of IGMP compatible?

IGMPv2 is compatible only with IGMPv1.

IGMPv2 is compatible only with IGMPv2.

IGMPv3 is compatible only with IGMPv3.

IGMPv3 is compatible only with IGMPv1

In a Cisco SD-Access solution, what is the role of the Identity Services Engine?

It is leveraged for dynamic endpoint to group mapping and policy definition.

It provides GUI management and abstraction via apps that share context.

it is used to analyze endpoint to app flows and monitor fabric status.

It manages the LISP EID database.

Cisco 350-401 Practice Test 1 - Free Online Exam Prep & Questions

What are two benefits of YANG? (Choose two.)

A.

It enforces the use of a specific encoding format for NETCONF.

B.

It collects statistical constraint analysis information.

C.

It enables multiple leaf statements to exist within a leaf list.

D.

It enforces configuration semantics.

E.

It enforces configuration constraints.

Cisco 350-401 Practice Test 1

Question

Cisco 350-401 Practice Tests

Practice Tests