In a Cisco SD-Access environment, which function is performed by the border node?

Provide connectivity to traditional layer 3 networks.

Connect uteri and devices to the fabric domain.

Provide reachability information to fabric endpoints.

Provide connectivity to traditional layer 3 networks.

Refer to the exhibit. Refer to the exhibit. An engineer builds an EEM script to apply an access list. Which statement must be added to complete the script?

action 2.1 cli command "ip action 3.1 ell command 101''

action 6.0 ell command ''ip access-list extended 101''

action 6.0 cli command ''ip access-list extended 101"

Refer to the exhibit. An engineer configures a new WLAN that will be used for secure communications; however, wireless clients report that they are able to communicate with each other. Which action resolves this issue?

Enable Wi-Fi Direct Client Policy

Why would a customer implement an on-premises solution instead of a cloud solution?

On-premises is more secure man cloud.

On-premises Offers greater compliance for government regulations than cloud

On-premises offers greater scalability than cloud.

On-premises oilers shorter deployment time than cloud.

On-premises is more secure man cloud.

Which access control feature does MAB provide?

network access based on the physical address of a device

user access based on IP address

allows devices to bypass authenticate*

network access based on the physical address of a device

simultaneous user and device authentication

What is the result of applying this access control list?

TCP traffic with the ACK bit set is allowed

TCP traffic with the URG bit set is allowed

TCP traffic with the SYN bit set is allowed

TCP traffic with the ACK bit set is allowed

TCP traffic with the DF bit set is allowed

A firewall address of 192 166.1.101 can be pinged from a router but, when running a traceroute to It, this output is received What is the cause of this issue?

The firewall blocks UDP traffic

The firewall blocks ICMP traceroute traffic.

The firewall rule that allows ICMP traffic does not function correctly

The firewall blocks ICMP traffic.

The firewall blocks UDP traffic

Refer to the exhibit. Reler to the exhibit The EtherChannel between SW1 and SW2 is not operational. Which a coon will resolve the issue?

Configure channel-group 1 mode active on Gl'O and GM of SW1 .

Configure channel-group 1 mode active on GVO and G1 1 of SW2.

Configure twitchport trunk encapsulation dot1q on SW1 and SW2.

Configure channel-group 1 mode active on Gl'O and GM of SW1 .

Configure switchport mode dynamic desirable on SW1 and SW2

What is a characteristic of a traditional WAN?

united data plane and control plane

low complexity and high overall solution scale

centralized reachability, security, and application policies

operates over DTLS and TLS authenticated and secured tunnels

united data plane and control plane

Refer to the exhibit. An LACP port channel is configured between Switch-1 and Switch-2, but It falls to come up. Which action will resolve the issue?

Configure Switch-1 with channel-group mode active

Configure Switch-2 with channel-group mode desirable.

Configure Switch-1 with channel-group mode on.

Configure SwKch-2 with channel-group mode auto

What is one being of implementing a data modetag language?

accuracy of the operations performed

uses XML style of data formatting

machine-oriented logic and language-facilitated processing.

conceptual representation to simplify interpretation.

What is a benefit of Cisco TrustSec in a multilayered LAN network design?

Applications flows between hosts on the LAN to remote destinations can be encrypted.

Policy or ACLS are nor required.

There is no requirements to run IEEE 802.1X when TrustSec is enabled on a switch port.

Applications flows between hosts on the LAN to remote destinations can be encrypted.

Policy can be applied on a hop-by-hop basis.

A network engineer wants to configure console access to a router without using AAA so that the privileged exec mode is entered directly after a user provides the correct login credentials. Which action achieves this goal?

Configure privilege level 15 on line con 0.

Configure login authentication privileged on line con 0.

Configure a local username with privilege level 15.

Configure privilege level 15 on line con 0.

Configure a RADIUS or TACACS+ server and use it to send the privilege level.

Cisco 350-401 Practice Test 18 - Free Online Exam Prep & Questions

Refer to the exhibit.

Cisco 350-401 image Question 681 115980 10102024232943000000

Refer to the exhibit.

Why does the OSPF neighborship fail between the two interfaces?

Become a Premium Member for full access

Unlock Premium Member

Cisco 350-401 Practice Test 18

Question

Cisco 350-401 Practice Tests

Practice Tests