Which three methods does Cisco DNA Centre use to discover devices? (Choose three)

a specified range of IP addresses

What is a characteristic of a virtual machine?

It relies on hypervisors to allocate computing resources for it

It must be aware of other virtual machines, in order to allocate physical resources for them

It is deployable without a hypervisor to host it

It must run the same operating system as its host

It relies on hypervisors to allocate computing resources for it

Refer to the exhibit. An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?

R4(config-router)bgp default local-preference 200

R3(config-router)neighbor 10.1.1.1 weight 200

R3(config-router)bgp default local-preference 200

R4(config-router)nighbor 10.2.2.2 weight 200

A company has an existing Cisco 5520 HA cluster using SSO. An engineer deploys a new single Cisco Catalyst 9800 WLC to test new features. The engineer successfully configures a mobility tunnel between the 5520 cluster and 9800WLC. Client connected to the corporate WLAN roam seamlessly between access points on the 5520 and 9800 WLC. After a failure on the primary 5520 WLC, all WLAN services remain functional; however, Client roam between the 5520 and 9800 controllers without dropping their connection. Which feature must be configured to remedy the issue?

mobility MAC on the 5520 cluster

new mobility on the 5520 cluster

Refer to the exhibit. A network engineer configures OSPF and reviews the router configuration. Which interface or interface or interface are able to establish OSPF adjacency?

GigabitEthemet0/1 and GigabitEthernet0/1.40

Gigabit Ethernet0/0 and GigabitEthemet0/1

Refer to the exhibit. What are two effects of this configuration? (Choose two.)

If R1 goes down. R2 becomes active and remains the active device when R1 comes back online.

If R2 goes down, R1 becomes active but reverts to standby when R2 comes back online.

If R1 goes down. R2 becomes active and remains the active device when R1 comes back online.

If R1 goes down, R2 becomes active but reverts to standby when R1 comes back online.

Refer to the exhibit. What does the snippet of code achieve?

It opens an ncclient connection to a Cisco Nexus device and maintains it for the duration of the context.

It creates a temporary connection to a Cisco Nexus device and retrieves a token to be used for API calls.

It opens a tunnel and encapsulates the login information, if the host key is correct.

It opens an ncclient connection to a Cisco Nexus device and maintains it for the duration of the context.

It creates an SSH connection using the SSH key that is stored, and the password is ignored.

What is one fact about Cisco SD-Access wireless network deployments?

The access point is part the fabric overlay

The access point is part of the fabric underlay

The WLC is part of the fabric underlay

The access point is part the fabric overlay

The wireless client is part of the fabric overlay

A network engineer configures a new GRE tunnel and enters the show run command. What does the output verify?

The tunnel destination will be known via the tunnel interface

The tunnel will be established and work as expected

The tunnel destination will be known via the tunnel interface

The tunnel keepalive is configured incorrectly because they must match on both sites

The default MTU of the tunnel interface is 1500 byte.

Refer to the exhibit. Which configuration change will force BR2 to reach 209 165 201 0/27 via BR1?

Set the MED to 1 on PE2 toward BR2 outbound.

Set the weight attribute to 65.535 on BR1 toward PE1.

Set the local preference to 150 on PE1 toward BR1 outbound

Set the MED to 1 on PE2 toward BR2 outbound.

Set the origin to igp on BR2 toward PE2 inbound.

Which two methods are used to reduce the AP coverage area? (Choose two)

Increase minimum mandatory data rate

Reduce channel width from 40 MHz to 20 MHz

Disable 2.4 GHz and use only 5 GHz.

Increase minimum mandatory data rate

Refer to the exhibit. Security policy requires all idle-exec sessions to be terminated in 600 seconds. Which configuration achieves this goal?

line vty 01 5 exec-timeout 10 0

line vty 0 15 absolute-timeout 600

line vty 01 5 exec-timeout 10 0

What does the cisco REST response indicate?

Cisco DNA Center has the incorrect credentials for cat9000-1

Cisco DNA Center has the Incorrect credentials for cat3850-1

Cisco DNA Center is unable to communicate with cat9000-1

Cisco DNA Center has the incorrect credentials for cat9000-1

Cisco DNA Center has the Incorrect credentials for RouterASR-1

Refer to the exhibit. An engineer configures monitoring on SW1 and enters the show command to verify operation. What does the output confirm?

RSPAN session 1 is incompletely configured for monitoring

SPAN session 1 monitors activity on VLAN 50 of a remote switch

SPAN session 2 only monitors egress traffic exiting port FastEthernet 0/14.

SPAN session 2 monitors all traffic entering and exiting port FastEthernet 0/15.

RSPAN session 1 is incompletely configured for monitoring

Refer to the exhibit. A network engineer configures NAT on R1 and enters me show command to verity the configuration What does the output confirm?

The first pocket triggered NAT to add on entry to NAT table

R1 is configured with NAT overload parameters

A Telnet from 160.1.1 1 to 10.1.1.10 has been initiated.

R1 to configured with PAT overload parameters

An engineer is troubleshooting the Ap join process using DNS. Which FQDN must be resolvable on the network for the access points to successfully register to the WLC?

cisco-capwap-controller.domain.com

Refer to the exhibit. An engineer is investigating why guest users are able to access other guest user devices when the users are connected to the customer guest WLAN. What action resolves this issue?

implement MFP client protection

Which characteristic distinguishes Ansible from Chef?

Ansible pushes the configuration to the client. Chef client pulls the configuration from the server.

Ansible lacs redundancy support for the master server. Chef runs two masters in an active/active mode.

Ansible uses Ruby to manage configurations. Chef uses YAML to manage configurations.

Ansible pushes the configuration to the client. Chef client pulls the configuration from the server.

The Ansible server can run on Linux, Unix or Windows. The Chef server must run on Linux or Unix.

Refer to the exhibit. Assuming the WLC's interfaces are not in the same subnet as the RADIUS server, which interface would the WLC use as the source for all RADIUS-related traffic?

the interface specified on the WLAN configuration

any interface configured on the WLC

the controller management interface

the controller virtual interface

In an SD-Access solution what is the role of a fabric edge node?

to connect wired endpoint to the SD-Access fabric

to connect external Layer 3- network to the SD-Access fabric

to connect wired endpoint to the SD-Access fabric

to advertise fabric IP address space to external network

to connect the fusion router to the SD-Access fabric

What is a benefit of a virtual machine when compared with a physical server?

Multiple virtual servers can be deployed on the same physical server without having to buy additional hardware.

Virtual machines increase server processing performance.

The CPU and RAM resources on a virtual machine cannot be affected by other virtual machines.

Deploying a virtual machine is technically less complex than deploying a physical server.

When using TLS for syslog, which configuration allows for secure and reliable transportation of messages to its default port?

logging host 10.2.3.4 vrf mgmt transport tcp port 6514

logging host 10.2.3.4 vrf mgmt transport udp port 6514

logging host 10.2.3.4 vrf mgmt transport tcp port 514

logging host 10.2.3.4 vrf mgmt transport udp port 514

At which Layer does Cisco DNA Center support REST controls?

YMAL output from responses to API calls

Refer to the exhibit. Which troubleshooting a routing issue, an engineer issues a ping from S1 to S2. When two actions from the initial value of the TTL? (Choose two.)

The packet reaches R3, and the TTL expires

The packet reaches R2 and the TTL expires

The packet reaches R3, and the TTL expires

R2 replies with a TTL exceeded message

R3 replies with a TTL exceeded message.

The packet reaches R2 and the TTL expires

R1 replies with a TTL exceeded message

The packet reaches R1 and the TTL expires.

Refer to the exhibit. An engineer is configuring an EtherChannel between Switch1 and Switch2 and notices the console message on switch2. Based on the output, which action resolves this issue?

Configure the same EtherChannel protocol on both switches

Configure less member ports on Switch2.

Configure the same port channel interface number on both switches

Configure the same EtherChannel protocol on both switches

Configure more member ports on Switch1.

Refer the exhibit. Which router is the designated router on the segment 192.168.0.0/24?

This segment has no designated router because it is a p2p network type.

This segment has no designated router because it is a nonbroadcast network type.

This segment has no designated router because it is a p2p network type.

Router Chicago because it has a lower router ID

Router NewYork because it has a higher router ID

What are two differences between the RIB and the FIB? (Choose two.)

The RIB is a database of routing prefixes, and the FIB is the Information used to choose the egress interface for each packet.

The RIB is derived from the control plane, and the FIB is derived from the RIB.

The FIB is derived from the data plane, and the RIB is derived from the FIB.

The RIB is a database of routing prefixes, and the FIB is the Information used to choose the egress interface for each packet.

FIB is a database of routing prefixes, and the RIB is the information used to choose the egress interface for each packet.

The FIB is derived from the control plane, and the RIB is derived from the FIB.

The RIB is derived from the control plane, and the FIB is derived from the RIB.

Cisco 350-401 Practice Test 2 - Free Online Exam Prep & Questions

Which controller is capable of acting as a STUN server during the onboarding process of Edge devices?

vBond

vSmart

vManage

PNP server

Comment (0)

Cisco 350-401 Practice Test 2

Question

Cisco 350-401 Practice Tests

Practice Tests