Which solution should be used in a high-density wireless environment to increase bandwidth for each user?

Increase the mandatory minimum data rate.

Increase the cell size of each AP.

How do OSPF and EIGKP compare?

EIGRP shows successor and feasible successor routes, and OSPF shows all known routes.

OSPF and EIGRP us the same administrative distance.

Both OSPF and EIGRP use the concept of areas.

EIGRP shows an known routes, and OSPF shows successor and feasible successor routes.

EIGRP shows successor and feasible successor routes, and OSPF shows all known routes.

Which method ensures the confidentiality ot data exchanged over a REST API?

Encode sensitive data using Base64 encoding.

Use the POST method instead of URL-encoded GET to pass parameters.

Encode sensitive data using Base64 encoding.

Deploy digest-based authentication to protect the access to the API.

Use TLS to secure the underlying HTTP session.

An engineer must contigure a rou'.er to allow users to run specHic configuration commands by validating the user against the router database. Which configuration must be applied?

aaa authorization exec default local

aaa authentication network default local

aaa authentication exec default local

aaa authorization exec default local

aaa authorization network default local

A script contains the statement 'while loop != 999:' Which value terminates the loop?

A value less than or equal to 999.

A value greater than or equal to 999.

Refer to the exhibit. What does the response '204 No Content mean for the REST API request?

Interface toopback 100 is removed from the configuration.

Interface toopback 100 is not removed from the configuration.

Interface toopback 100 is not found in the configuration.

Interface toopback 100 is removed from the configuration.

The DELETE method is not supported.

What is a characteristic of the Cisco DMA Center Template Editor feature?

It uses a predefined configuration through parameterized elements or variables.

It facilitates software upgrades lo network devices from a central point.

It facilitates a vulnerability assessment of the network devices.

It provides a high-level overview of the health of every network device.

It uses a predefined configuration through parameterized elements or variables.

Refer to the exhibit. Link 1 uses a copper connection and link 2 uses a fiber connection. The fiber port must be the primary port for all forwarding. The output of the show spanning-tree command on SW2 shows that the fiber port is blocked by Spanning Tree. After entering the spanning-tree port-priority 32 command on G0/1 on SW2, the port remains blocked. Which command should be entered on the ports connected to Link 2 is resolve the issue?

Enter spanning-tree port-priority 32 on SW1.

Enter spanning-tree port-priority 64 on SW2

Enter spanning-tree port-priority 224 on SW1.

Enter spanning-tree port-priority 4 on SW2.

Enter spanning-tree port-priority 32 on SW1.

Which behavior can be expected when the HSRP versions is changed from 1 to 2?

Each HSRP group reinitializes because the virtual MAC address has changed.

No changes occur because version 1 and 2 use the same virtual MAC OUI.

Each HSRP group reinitializes because the multicast address has changed.

No changes occur because the standby router is upgraded before the active router.

Why would an architect use an OSPF virtual link?

to connect a nonbackbone area to Area 0 through another nonbackbone area

to allow a stub area to transit another stub area

to connect two networks that have overlapping private IP address space

to merge two existing Area Os through a nonbackbone

to connect a nonbackbone area to Area 0 through another nonbackbone area

What mechanism does PIM use to forward multicast traffic?

PIM sparse mode uses a pull model to deliver multicast traffic.

PIM dense mode uses a pull model to deliver multicast traffic.

PIM sparse mode uses receivers to register with the RP.

PIM sparse mode uses a flood and prune model to deliver multicast traffic.

Refer to the exhibit. Clients are reporting an issue with the voice traffic from the branch site to the central site. What is the cause of this issue?

Traffic is load-balancing over both links, causing packets to arrive out of order.

The voice traffic is using the link with less available bandwidth.

There is a routing loop on the network.

Traffic is load-balancing over both links, causing packets to arrive out of order.

There is a high delay on the WAN links.

Refer to the exhibit. An engineer must send the 172.16.2.0 /24 user traffic to a packet capture tool to troubleshoot an issue. Which action completes the configuration?

Define the remote span VLAN on SW1 and SW2.

Encrypt the traffic between the users and the monitoring servers.

Disable the spanning tree protocol on the monitoring server VLAN.

Enable the Cisco Discovery Protocol on the server interfaces.

Define the remote span VLAN on SW1 and SW2.

A wireless network engineer must configure a WPA2+WPA3 policy with the Personal security type. Which action meets this requirement?

Configure the GCMP256 encryption cipher.

Configure the CCMP256 encryption cipher.

Configure the CCMP128 encryption cipher.

Configure the GCMP128 encryption cipher.

Refer to the exhibit. Which statement is needed to complete the EEM applet and use the Tel script to store the backup file?

action 2.0 cli command 'flash:write_backup.tcl'

action 2.0 cli command 'write_backup.tcl tcl'

action 2.0 cli command 'flash:write_backup.tcl'

action 2.0 cli command 'write_backup.tcl'

action 2.0 cli command 'telsh flash:write_backup.tcl'

Refer to the exhibit. Which HTTP request produced the REST API response that was returned by Cisco DNA Center?

GET/network-device?macAddress=ac:4a:56:6c:7c:00

fetch /network-device?macAddress=ac:4a:56:6c:7c:00

POST/network-device?macAddress=ac:4a:56:6c:7c:00

GET/network-device?macAddress=ac:4a:56:6c:7c:00

What function does VXLAN perform in a Cisco SD-Access deployment?

systems management and orchestration

Refer to the exhibit. What happens to access interfaces where VLAN 222 is assigned?

They are placed into an inactive state.

A description 'RSPAN' is added.

They are placed into an inactive state.

Cisco 350-401 Practice Test 21 - Free Online Exam Prep & Questions

Which Cisco WLC feature allows a wireless device to perform a Layer 3 roam between two separate controllers without changing the client IP address?

Become a Premium Member for full access

Unlock Premium Member

Cisco 350-401 Practice Test 21

Question

Cisco 350-401 Practice Tests

Practice Tests