What is the API keys option for REST API authentication?

a predetermined string that is passed from client to server

a username that is stored in the local router database

a credential that is transmitted unencrypted

a package of files that is used to describe a virtual machine or virtual appliance

a package that is similar to an IMG and that contains an OVA file used to build a virtual machine

an alternative form of an ISO that Is used to install the base operating system of a virtual machine

the third step in a P2V migration

a package of files that is used to describe a virtual machine or virtual appliance

What is a characteristic of a type 2 hypervisor?

ideal for client/end-user system

What is a characteristics of traffic policing?

queues out-of-profile packets until the buffer is full

lacks support for marking or remarking

must be applied only to outgoing traffic

can be applied in both traffic directions

queues out-of-profile packets until the buffer is full

A Cisco DNA Center REST API sends a PUT to the /dna/intent/api/v1/network-device endpoint A response code of 504 is received What does the code indicate?

The response timed out based on a configured interval

The user does not have authorization to access this endpoint.

The username and password are not correct

The web server is not available

Which benefit is provided by the Cisco DNA Center telemetry feature?

provides improved network security

aids In the deployment network configurations

Refer to the exhibit. After configuring the BGP network, an engineer verifies that the path between Servers and Server2 Is functional. Why did RouterSF choose the route from RouterDAL instead of the route from RouterCHI?

The Router-ID Tor Router DAL is lower than the Roter-ID for RouterCHI.

The route from RouterOAL has a lower MED.

BGP is not running on RouterCHI.

There is a static route in RouterSF for 10.0.0.0/24.

Reter to the exhibit. An engineer configures the trunk and proceeds to configure an ESPAN session to monitor VLANs10.20. and 30. Which command must be added to complete this configuration?

Device(config.mon.erspan.stc)# no filter vlan 30

Devic(config.mon.erspan.src-dst)# no vrf 1

Devic(config.mon.erspan.src-dst)# erspan id 6

Device(config.mon-erspan.Src-dst)# mtu 1460

Reter to the exhibit. What is the JSON syntax that is formed the data?

{'Name'':''Bob johnon':''Age': 75 ''Alive'': true,''Favorite Foods';[''Cereal';''Mustard';''Onions'}}

{'Name'';''Bob johnon';''Age': Sevenfive,''Alive'': true,''FavoriteFoods';[''Cereal';''Mustard';''Onions'}}

{'Name'':''Bob johnon':''Age': 75 ''Alive'': true,''Favorite Foods';[''Cereal';''Mustard';''Onions'}}

{'Name'':''Bob johnon':''Age: 75,''Alive: true, FavoriteFoods;[Cereal, Mustard';''Onions}}

{'Name'': 'Bob johnon','Age': 75,'Alive': true,''FavoriteFoods': 'Cereal';'Mustard','Onions'}}

Refer to the exhibit. What are two effect of this configuration? (Choose two.)

Inside source addresses are translated to the 209.165.201.0/27 subnet.

The 10.1.1.0/27 subnet is assigned as the inside local addresses.

Inside source addresses are translated to the 209.165.201.0/27 subnet.

It establishes a one-to-one NAT translation.

The 10.1.1.0/27 subnet is assigned as the inside global address range.

The 209.165.201.0/27 subnet is assigned as the outside local address range.

The 10.1.1.0/27 subnet is assigned as the inside local addresses.

A company requires a wireless solution to support its mam office and multiple branch locations. All sites have local Internet connections and a link to the main office lor corporate connectivity. The branch offices are managed centrally.Which solution should the company choose?

Cisco Catalyst switch with embedded controller

Reter to the exhibit. Refer to the exhibit. Which configuration must be added to enable GigabitEthemet 0/1 to participate in OSPF?

SF_router (conflg-routerp) network 10.10.1.0 0.0.0.255 area 1

SF_router (config-router)# network 10.10.1.0 0.0.0.255 area 0

SF_rouier (conng)# network 10.10.1.0 0.0.0.255 area 1

SF_router (conflg-routerp) network 10.10.1.0 0.0.0.255 area 1

SF_rouler (contlg-rouler)# network 10.10.1.0 255.255.255.0 area 0

Reter to the exhibit. Refer to the exhibit. A network engineer checks connectivity between two routers. The engineer can ping the remote endpoint but cannot see an ARP entry. Why is there no ARP entry?

Interface FastEthernet0/0 Is configured in VRF CUST-A, so the ARP entry is also in that VRF.

The ping command must be executed in the global routing table.

Interface FastEthernet0/0 Is configured in VRF CUST-A, so the ARP entry is also in that VRF.

When VRFs are used. ARP protocol must be enabled In each VRF.

When VRFs are used. ARP protocol is disabled in the global routing table.

Which function does a fabric AP perform in a cisco SD-access deployment?

It connects wireless clients to the fabric.

It updates wireless clients' locations in the fabric

It connects wireless clients to the fabric.

It manages wireless clients' membership information in the fabric

It configures security policies down to wireless clients in the fabric.

Reter to the exhibit. Refer to the exhibit. Which python code parses the response and prints "18:32:21.474 UTC sun Mar 10 2019?

print(response[result']['body']['simple_time']}

print(response['resut'][0||'simple_time']}

print(response[result']['body']['simple_time']}

print(response['body']['simple_time']}

print(response[jresult']['body']['simple_time']}

what is a benefit of using a Type 2 hypervisor instead of a Type 1 hypervisor?

ability to operate on hardware that is running other OSs

Improved security because the underlying OS is eliminated

Improved density and scalability

ability to operate on hardware that is running other OSs

Refer to the exhibit. A network engineer must configure the router to use the ISE-Servers group for authentication. If both ISE servers are unavailable, the local username database must be used. If no usernames are defined in the configuration, then the enable password must be the last resort to log in. Which configuration must be applied to achieve this result?

aaa authentication login default group ISE-Servers local enable

aaa authentication login default group enable local ISE-Servers

aaa authorization exec default group ISE-Servers local enable

aaa authentication login error-enable aaa authentication login default group enable local ISE-Servers

A large campus network has deployed two wireless LAN controllers to manage the wireless network.WLC1 and WLC2 have been configured as mobility peers. A client device roams from AP1 on WLC1 to AP2 on WLC2, but the controller's client interfaces are on different VLANs. How do the wireless LAN controllers handle the inter-subnet roaming?

WLC2 marks the client with an anchor entry In Its own database. The database entry Is copied to the new controller and marked with a foreign entry on WLC1

WLC1 marks me diem with an anchor entry In Its own database. The database entry is copied to the new controller and marked with a foreign entry on VVLC2.

WLC2 marks the client with an anchor entry In Its own database. The database entry Is copied to the new controller and marked with a foreign entry on WLC1

WLCl marks the client with a foreign entry in its own database. The database entry is copied to the new controller and marked with an anchor entry on WLC2.

WLC2 marks the client with a foreign entry In its own database. The database entry Is copied to the new controller and marked with an anchor entry on WLC1.