ExamGecko
Search Search Login
Home Home / Cisco / 350-601

Cisco 350-601 Practice Test - Questions Answers, Page 39

Question list
Search
Search

List of questions

Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

Refer to the exhibit. An engineer configures FCoE in a newly installed data center. Which configuration must be applied to activate VSAN 100 on VFC100?
Refer to the exhibit. A source is sending a multicast traffic stream to the receiver. How is the multicast traffic expected to flow through the network when it reaches a vPC peer?
Refer to the exhibit. Refer to the exhibit. An engineer must monitor ingress traffic from SW1 and SW2 port-channel interfaces from SW3. Which configuration must be implemented to accomplish this goal? A) B) C) D)
DRAG DROP Refer to the exhibit. During a recent outage, a network engineer discovered that host A started to experience intermittent connectivity, when Leaf102 was down. Drag and drop the code snippets from the bottom onto the boxes in the code to resolve the problem. Not all code snippets are used.
Refer to the exhibit. An engineer must access a Cisco UCS C-Series server KVM from a remote location. The engineer must use the out-of-band interface to access the KYM. Which configuration set meets these requirements?
Refer to the exhibit. Refer to the exhibit. What is the result of executing this python code?
What are two types of FC/FCoE oversubscription ratios? (Choose two.)
DRAG DROP An engineer deploys a custom guest shell rootfs onto multiple switches. Drag and drop the steps from the left into the correct order on the right. Export the Guest Shell rootfs.
An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric interconnect. Which backup type must be selected to meet these requirements?
An engineer must perform a backup and restore in Cisco UCS to rebuild the system in a disaster recovery scenario. The backup file must be encrypted to prevent the passwords from being stored as clear text. Which backup configuration meets these requirements?

Question 381

Report
Export
Collapse

Which two features are used to allow a nondisruptive upgrade for the ISSU process? (Choose two.)

A.

connectivity management processor

A.

connectivity management processor

Answers
B.

nonstop forwarding

B.

nonstop forwarding

Answers
C.

graceful restart

C.

graceful restart

Answers
D.

stateful switchover

D.

stateful switchover

Answers
E.

advanced services license

E.

advanced services license

Answers
Suggested answer: B, D

Explanation:

The In-Service Software Upgrade (ISSU) process is designed to upgrade the system software with minimal disruption to the network. Nonstop forwarding (NSF) and stateful switchover (SSO) are two features that work together to maintain packet forwarding and switch state information during the ISSU process.NSF allows the router to continue forwarding packets even when the route processor is failing over, while SSO synchronizes state information between redundant route processors to ensure a seamless transition during a failover1.

Question 382

Report
Export
Collapse

Refer to the exhibit.

An engineer must configure a Fibre Channel device alias named TEST for a device attached to port fc1/9 of a Cisco Nexus Series Switch. Which command set completes the configuration?

A)

B)

C)

D)

A.

Option

A.

Option

Answers
B.

Option

B.

Option

Answers
C.

Option

C.

Option

Answers
D.

Option

D.

Option

Answers
Suggested answer: A

Explanation:

To configure a Fibre Channel device alias named TEST for a device attached to port fc1/9 on a Cisco Nexus Series Switch, the correct command set is found in Option A.The commands should be entered in configuration mode, starting with accessing the device-alias database, creating the device-alias named TEST with the specified pwwn, and committing the changes to the database123.

Question 383

Report
Export
Collapse

A network engineer must configure a Cisco MDS switch to use the local user database for console access if all AAA servers are unreachable. Which configuration should be applied to complete this task?

A.

aaa authentication login default fallback error local

A.

aaa authentication login default fallback error local

Answers
B.

aaa authentication login console fallback error local

B.

aaa authentication login console fallback error local

Answers
C.

aaa authentication login default local

C.

aaa authentication login default local

Answers
D.

aaa authentication login console local

D.

aaa authentication login console local

Answers
Suggested answer: B

Explanation:

This configuration ensures that if AAA servers cannot be reached, the switch will fall back to using the local user database for authentication when accessing the console.Thefallback error localkeyword specifies that the local database should be used in case of an error in reaching the AAA servers1.

Question 384

Report
Export
Collapse

Refer to the exhibit.

A network engineer is using tcpdump to capture a snapshot of OSPF-related traffic on a specific Cisco NX-OS switch port. For security reasons, the capture must be taken using an embedded container that is already deployed on the Cisco Nexus device. Which command completes the script?

A.

guestshell

A.

guestshell

Answers
B.

guestshell-bash

B.

guestshell-bash

Answers
C.

run guestshell

C.

run guestshell

Answers
D.

run bash

D.

run bash

Answers
Suggested answer: C

Explanation:

The commandrun guestshellis used to access the Guest Shell on Cisco NX-OS devices. Guest Shell is a secure, Linux-based environment that runs as a virtualized application container on the device. It allows network administrators to use Linux utilities and scripts, enhancing automation and monitoring capabilities.In this scenario, usingrun guestshellwould enable the engineer to utilize the tcpdump utility within the container to capture OSPF-related traffic on the switch port1.

Question 385

Report
Export
Collapse

DRAG DROP

An engineer mus! configure HSRP protocol on two Cisco Nexus 9000 Series Switches running a virtual port channel. In addition, the HSRP implementation must meet these requirements:

It must allow more than 500 groups. switch 1 must act as the primary switch.

Both switches must use a user-defined hardware address.

Drag and drop the commands from the right to complete a configuration of the HSRP on the left. The commands are used more than once. Not all commands are used.


Question 385
Correct answer: Question 385

Question 386

Report
Export
Collapse

DRAG DROP

Drag and drop the mechanisms to collect data from a network from the left onto their characteristics on the right


Question 386
Correct answer: Question 386

Question 387

Report
Export
Collapse

DRAG DROP

A network engineer must configure FCoE on an interface of a Cisco MDS 9000 Series Switch. It should be used for mapping between VLAN 600 and VSAN 6. Drag and drop the commands from the bottom into their implementation order in the FCoE configuration. Not all commands are used.


Question 387
Correct answer: Question 387

Question 388

Report
Export
Collapse

Which file service protocol allows the files to appear locally mapped to the client and provides view, store, and update capabilities on a remote Linux-based storage repository that also serves as a distributed file system standard for NAS?

A.

NFS

A.

NFS

Answers
B.

FTP

B.

FTP

Answers
C.

iSCSI

C.

iSCSI

Answers
D.

IFS

D.

IFS

Answers
Suggested answer: A

Explanation:

NFS, or Network File System, is a file service protocol that allows files to be accessed over a network in a manner similar to how local storage is accessed. NFS provides the capability for clients to view, store, and update files on a remote Linux-based storage repository.It is widely used as a distributed file system standard for Network Attached Storage (NAS) because it allows the files to appear locally mapped to the client, facilitating easy file sharing and management1.

Question 389

Report
Export
Collapse

Refer to the exhibit.

Which command needs to be added to the line starting with the 'file' keyword to have the generated running-config file with the name 'fusion-config_' and current date?

A.

string(Cfusion-config_') + date)

A.

string(Cfusion-config_') + date)

Answers
B.

('fusion-configj) + date

B.

('fusion-configj) + date

Answers
C.

str.ffusion-configj) + date

C.

str.ffusion-configj) + date

Answers
D.

(*fusion-config_ * date')

D.

(*fusion-config_ * date')

Answers
Suggested answer: B

Explanation:

The correct command to add to the script is option B, which concatenates the string 'fusion-config_' with the variabledateto form the filename. This will result in a filename that includes the desired prefix followed by the current date, matching the format specified in the question.

Question 390

Report
Export
Collapse

Which Cisco UCS Manager XML encoded backup type must be used to back up user names, roles, and service profiles?

A.

Full State Configuration

A.

Full State Configuration

Answers
B.

Logical Configuration

B.

Logical Configuration

Answers
C.

All Configuration

C.

All Configuration

Answers
D.

System Configuration

D.

System Configuration

Answers
Suggested answer: D

Explanation:

The System Configuration backup type in Cisco UCS Manager is specifically designed to back up system settings such as user names, roles, and locales. This XML file does not include the actual data on the servers but captures all the system configuration settings, which can be imported to the original fabric interconnect or to a different one. However, it cannot be used for a system restore.

Total 491 questions
Go to page: of 50
ExamGecko

Copyright @2023 ExamGecko | All right reserved

Mail us: [email protected]
About us
Contact us
Twitter X
Facebook
Medium
Convert VPLUS to PDF
Open VPLUS files Easily and Quickly
Privacy Policy
Disclaimer
Terms