Ask Question
Cisco 350-601 Practice Test - Questions Answers, Page 4
List of questions
Question 31
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?
Fibre Channel traffic is monitored only on one vHBA per server.
The destination port for monitoring must be an unassigned Fibre Channel port.
The monitoring of Fibre Channel traffic is limited to the default VSAN.
Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.
Option D is the correct statement about monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect. Fibre Channel traffic can be monitored even when it is encapsulated as FCoE (Fibre Channel over Ethernet) by using the SPAN (Switched Port Analyzer) feature. This allows network administrators to capture and analyze the Fibre Channel traffic flow and performance on any port or vHBA on the fabric interconnect.Reference:
Cisco UCS Manager GUI Configuration Guide, Release 4.0 - Configuring Fibre Channel Traffic Monitoring [Cisco UCS Manager], Configuring Fibre Channel Traffic Monitoring, Configuring Fibre Channel Traffic Monitoring
Cisco UCS Manager CLI Configuration Guide, Release 4.0 - Configuring Fibre Channel Traffic Monitoring [Cisco UCS Manager], Configuring Fibre Channel Traffic Monitoring, Configuring Fibre Channel Traffic Monitoring
Question 32
Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development. Which attribute must be used to assign the servers to different microsegments?
Data center
VMM domain
VM name
IP address
Option C is the correct attribute to use to assign the servers to different microsegments based on their VM names. By doing this, IT security can enforce policies that isolate production from development database servers existing in the same EPG and IP subnet. This can be achieved by using the microsegmentation feature of Cisco ACI, which allows granular control over the communication between endpoints within an EPG.Reference:
Cisco APIC Layer 4 to Layer 7 Services Deployment Guide, Release 4.2(x) - Microsegmentation [Cisco Application Policy Infrastructure Controller (APIC)], Microsegmentation, Microsegmentation Overview
Cisco APIC Layer 4 to Layer 7 Services Deployment Guide, Release 4.2(x) - Microsegmentation [Cisco Application Policy Infrastructure Controller (APIC)], Microsegmentation, Configuring Microsegmentation
Question 33
A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of 'warning'' and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity Which configuration must be applied to meet these requirements?
Option A
Option B
Option C
Option D
Option A is the correct configuration to meet the requirements of configuring system logging on the MDS switch. The commands set the console logging level to 5, which corresponds to the severity level of ''warning'' and above, and set the exec-timeout to 300 seconds, which means that the users will be logged out of the console after 5 minutes of inactivity. The other options are either incorrect or incomplete for the task.Reference:
Cisco MDS 9000 Family NX-OS System Management Configuration Guide, Release 8.x - Configuring System Message Logging [Cisco MDS 9000 NX-OS and SAN-OS Software], Configuring System Message Logging, Configuring Console Logging
Cisco MDS 9000 Family NX-OS System Management Configuration Guide, Release 8.x - Configuring the Command-Line Interface [Cisco MDS 9000 NX-OS and SAN-OS Software], Configuring the Command-Line Interface, Configuring the CLI Timeout Value
Question 34
A network administrator must configure an extra keyring in Cisco UCS Manager. The key must provide a high level of encryption and secure authentication when users use the web interface. Which configuration command set must be applied to meet these requirements?
Option A
Option B
Option C
Option D
Option A is the correct command set to configure an extra keyring in Cisco UCS Manager. The commands create a keyring named ''extra'' with a modulus of 4096 bits, which provides a high level of encryption. The commands also generate a self-signed certificate for the keyring, which enables secure authentication when users use the web interface.Reference:
Cisco UCS Manager CLI Configuration Guide, Release 4.0 - Configuring Key Management [Cisco UCS Manager], Configuring Key Management, Configuring Key Rings
Cisco UCS Manager CLI Configuration Guide, Release 4.0 - Configuring Key Management [Cisco UCS Manager], Configuring Key Management, Configuring Certificates
Question 35
An engineer needs to make an XML backup of Cisco UCS Manager The backup should be transferred using an authenticated and encrypted tunnel and it should contain all system and service profiles configuration Which command must be implemented to meet these requirements?
Option A
Option B
Option C
Option D
Option C is the correct command to make an XML backup of Cisco UCS Manager. The command creates a backup file named ''all-config9.bak'' that contains all system and service profiles configuration. The command also specifies the protocol as SCP (Secure Copy Protocol), which transfers the backup file using an authenticated and encrypted tunnel.Reference:
Cisco UCS Manager CLI Configuration Guide, Release 4.0 - Backing Up and Restoring the System Configuration [Cisco UCS Manager], Backing Up and Restoring the System Configuration, Exporting the System Configuration
Cisco UCS Manager CLI Configuration Guide, Release 4.0 - Backing Up and Restoring the System Configuration [Cisco UCS Manager], Backing Up and Restoring the System Configuration, Exporting the System Configuration Using SCP
Question 36
An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration. Which configuration is expected to be saved by using this backup type?
systems
roles
service profiles
servers
Option C is the correct configuration that is expected to be saved by using a logical configuration backup. A logical configuration backup includes the service profiles, service profile templates, policies, pools, and logical LAN and SAN connectivity configuration. It does not include the systems, roles, or servers configuration, which are part of the full state or all configuration backups.Reference:
Cisco UCS Manager GUI Configuration Guide, Release 4.0 - Backing Up and Restoring the System Configuration [Cisco UCS Manager], Backing Up and Restoring the System Configuration, Backup Types
Cisco UCS Manager CLI Configuration Guide, Release 4.0 - Backing Up and Restoring the System Configuration [Cisco UCS Manager], Backing Up and Restoring the System Configuration, Backup Types
Question 37
DRAG DROP
Drag and drop the characteristics from the left onto the correct storage systems on the right.
Question 38
DRAG DROP
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.
Question 39
DRAG DROP
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop the actions from the left into the order on the right.
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/fabric/nx-os/nx_os_fabric/zone.html
Question 40
Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot using POAP? (Choose two.)
image noted in the script file against switch bootflash
DHCP server to bootstrap IP information
script signed with security key
TFTP server that contains the configuration script
POAP feature license
Options B and D are the correct components that should be checked when a Cisco Nexus 9000 Series Switch fails to boot using POAP (Power On Auto Provisioning). POAP requires a DHCP server to bootstrap IP information for the switch, and a TFTP server that contains the configuration script and the image file for the switch. The other options are either irrelevant or incorrect for POAP.Reference:
Cisco Nexus 9000 Series NX-OS Fundamentals Configuration Guide, Release 9.3(x) - Configuring Power On Auto Provisioning [Cisco Nexus 9000 Series Switches], Configuring Power On Auto Provisioning, POAP Overview
Cisco Nexus 9000 Series NX-OS Fundamentals Configuration Guide, Release 9.3(x) - Configuring Power On Auto Provisioning [Cisco Nexus 9000 Series Switches], Configuring Power On Auto Provisioning, POAP Process
Related questions
Export
If you didn't receive an email within 5 minutes, you should submit a support request to [email protected].
|
BASIC - 1 Month
$
10
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
|
PLUS - 2 Months
$
15
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
|
PRO - 6 Months
$
40
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
|
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
Selling illegal goods, money scams etc.
Serious attack on a group.
Harassing an individual (including doxing)
Threatening or glorifying violence or serious harm, including self-harm
Nudity/Sexual content
Sexually explicit or suggestive imagery or writing involving minors
Sexually explicit or suggestive imagery or writing involving non-consenting adults or non-humans
Reusing content without attribution (link and blockquotes)
Not in English or has very bad formatting, grammar, and spelling
Author's credential is offensive, spam, or impersonation
Ex. Illegal content, incomplete question...
Question