CompTIA 220-1101 Practice Test - Questions Answers, Page 57

An overheating processor is the most likely cause of a computer that has a loud system fan and randomly freezes and reboots. A processor generates heat when it performs calculations, and if the heat is not dissipated properly, it can damage the processor or cause it to malfunction. A loud system fan indicates that the fan is working harder to cool down the processor, but it may not be enough to prevent overheating. A computer that freezes and reboots randomly is a common symptom of an overheating processor, as the system tries to protect itself from further damage by shutting down or restarting.

The other options are not as likely to cause these issues. A failing hard drive may cause data loss, corruption, or slow performance, but it does not affect the system fan or the processor temperature. A defective power supply may cause the computer to shut down unexpectedly, but it does not cause the system fan to be loud or the processor to overheat. Incompatible hardware may cause the computer to fail to boot, display errors, or crash, but it does not cause the system fan to be loud or the processor to overheat.

To troubleshoot and resolve an overheating processor issue, the technician should check and clean the air vents, provide proper ventilation, apply thermal paste, replace the fan or the heat sink, or upgrade the processor if necessary. The technician should also update the BIOS and the device drivers, adjust the power settings, and monitor the system temperature using diagnostic tools.

CompTIA A+ Certification Exam Core 1 Objectives1

The Official CompTIA A+ Core 1 Student Guide (Exam 220-1101) eBook2

How to Troubleshoot Fan Issues | Dell US3

Why your laptop fan is loud and how to fix it | Asurion4

HP Notebook PCs - Fan is noisy and spins constantly (Windows)5

The most important factor to consider when upgrading a laptop's RAM is the architecture of the RAM, which determines the type, speed, and capacity of the memory modules. The architecture of the RAM must match the architecture of the laptop's motherboard and processor, otherwise the RAM will not be compatible or function properly. The architecture of the RAM includes the DDR generation (such as DDR3 or DDR4), the form factor (such as SO-DIMM), the pin count (such as 204 or 260), the voltage (such as 1.35V or 1.5V), and the frequency (such as 1600MHz or 2400MHz).

The other options are not as crucial or relevant for the RAM upgrade. The brand of the RAM does not matter as long as the RAM meets the specifications of the laptop and is of good quality. The CAS latency of the RAM is a measure of the delay between the memory controller requesting data and the RAM delivering it, and it affects the performance of the RAM. However, the CAS latency is not a fixed value and can vary depending on the frequency and voltage of the RAM. Therefore, purchasing RAM with the same CAS latency is not necessary or sufficient for compatibility. The laptop's BIOS settings are usually configured to automatically detect and adjust to the RAM upgrade, and do not need to be manually changed by the technician.

CompTIA A+ Certification Exam Core 1 Objectives1

The Official CompTIA A+ Core 1 Student Guide (Exam 220-1101) eBook2

How to Upgrade the RAM in Your Laptop | Tom's Hardware3

How to Upgrade RAM on a Laptop | Crucial.com4

The issue described suggests that the home USB-C adapter may not be compatible with the laptop or may not meet the necessary power requirements to charge the device. Providing the user with an Original Equipment Manufacturer (OEM) power supply ensures compatibility and reliability, as OEM chargers are specifically designed to work with the laptop model in question. This solution ensures that the user can work efficiently both at home and in the office without facing charging issues, as OEM power supplies adhere to the specific voltage and amperage requirements of the device.

Reference: Hardware 1101.docx, 'Power Supplies' section.

After resolving an issue, it's crucial for a technician to document the findings, actions taken, and the outcome. This documentation serves several purposes: it provides a record of the problem and the solution for future reference, which can be helpful if the issue recurs or if similar problems arise with other users. It also ensures that any follow-up actions, if necessary, are well-informed by the history of the issue. Documenting the resolution process contributes to knowledge sharing among the support team and can improve the efficiency of future troubleshooting efforts.

Reference: Hardware & Network Troubleshooting 1101.docx, 'Documentation' section.

The digitizer is a crucial component of a touchscreen device, responsible for translating touch actions into digital signals that the device can interpret. If a hard reset does not resolve the touchscreen's unresponsiveness, it's likely that the digitizer is damaged. Physical damage, such as cracks or heavy impacts, can impair the digitizer's ability to function correctly, leading to an unresponsive touchscreen. This type of hardware issue requires professional repair or replacement of the touchscreen assembly to restore functionality.

Reference: Mobile Devices 1101.docx, 'Touchscreen Technology' section.

When a laptop screen fails to mirror to a television despite being correctly connected via an HDMI cable, a common issue is that the television is set to the wrong input source. Modern televisions have multiple input options (e.g., HDMI 1, HDMI 2, AV, etc.), and selecting the correct input that corresponds to the port the HDMI cable is connected to is essential for displaying the laptop's screen. The blinking logo on the TV screen typically indicates that the TV is functioning but not receiving a signal from the selected input source. Changing the TV's input to the correct HDMI port should resolve the issue and allow the laptop screen to mirror onto the TV.

Reference: Hardware 1101.docx, 'Connecting External Displays' section.

The 802.11ax protocol, also known as Wi-Fi 6, provides the fastest bandwidth among the options listed. It can achieve up to 10 Gbps of data transfer rate, using technologies such as OFDMA, MU-MIMO, and 1024-QAM. The 802.11ac protocol, or Wi-Fi 5, is the second fastest, with a maximum of 3.46 Gbps, followed by the 802.11n protocol, or Wi-Fi 4, with a maximum of 600 Mbps. The 802.11a protocol is the slowest, with a maximum of 54 Mbps

https://www.lifewire.com/wireless-standards-802-11a-802-11b-g-n-and-802-11ac-816553

Running the printer's alignment process is the first step that a technician should do to fix the shadowing problem on the printouts. Shadowing is a print quality issue that occurs when the printer prints a faint duplicate image of the original text or graphics, usually slightly offset from the original position. This can be caused by a misalignment of the printhead, which is the part of the printer that sprays ink onto the paper. The printer's alignment process is a procedure that adjusts the position and angle of the printhead to ensure that the ink is applied accurately and evenly on the paper. The printer's alignment process can be performed from the printer's menu, the printer's software, or the printer's maintenance tool, depending on the model and type of the printer.

The other options are not the best solutions for this problem. Reseating the new ink cartridges may not solve the shadowing issue, unless the cartridges are not properly installed or recognized by the printer. However, this is unlikely to be the case, as the printer would usually display an error message or refuse to print if the cartridges are not compatible or inserted correctly. Replacing the fuser assembly or installing the maintenance kit are more drastic and expensive measures that are usually done when the printer has more serious problems, such as paper jams, smearing, streaking, or fading. The fuser assembly is the part of the printer that heats and melts the toner onto the paper, and the maintenance kit is a set of components that need to be replaced periodically to keep the printer in good condition. These parts are not directly related to the shadowing issue, and replacing them may not fix the problem.

CompTIA A+ Certification Exam Core 1 Objectives1

The Official CompTIA A+ Core 1 Student Guide (Exam 220-1101) eBook2

How to Fix Shadow Printing on My Canon Printer?3

Fixing A Printer That Creates Shadow Images On Printouts4

A swollen battery is the most likely cause of the issue that the customer is reporting. A swollen battery is a battery that has expanded in size due to a chemical reaction, gas buildup, or overheating. A swollen battery can cause pressure on the laptop's chassis, keyboard, track pad, and other components, making them hard to press or click. A swollen battery can also pose a fire hazard and damage the laptop's performance and lifespan.

The other options are not as likely or relevant to the issue. Dropping the laptop may cause cracks or other visible damage to the chassis or screen, but the technician did not notice any. The digitizer is the part of the laptop that converts touch input into digital signals, and it has nothing to do with the keyboard or the track pad buttons. An open bottle of rubbing alcohol falling onto the keyboard may cause liquid damage, corrosion, or short circuits, but it would not affect the track pad buttons or the bottom edge of the keyboard.

To troubleshoot and resolve the issue, the technician should remove the battery from the laptop and inspect it for signs of swelling, such as bulging, deformation, or leakage. The technician should also check the laptop's chassis, keyboard, and track pad for any signs of damage or warping caused by the battery. The technician should then replace the swollen battery with a new one that is compatible with the laptop's model and specifications. The technician should also dispose of the swollen battery properly and safely, following the local regulations and guidelines.

CompTIA A+ Certification Exam Core 1 Objectives1

The Official CompTIA A+ Core 1 Student Guide (Exam 220-1101) eBook2

How to Fix a Swollen Laptop Battery - Lifewire3

How to Tell If Your Laptop Battery Is Swollen - Techwalla4