ExamGecko
Login
Home / Cisco / 300-615 / List of questions
Ask Question

Cisco 300-615 Practice Test - Questions Answers, Page 6

Add to Whishlist

List of questions

Question 51

Report Export Collapse

A server administrator attempts to change the Cisco IMC KVM certificate to one signed by a private CA, but the certificate is not being accepted. What can cause this process to fail?

using a certificate with a password-protected private key

using a certificate with a password-protected private key

RSA encryption being used in the generation of the certificate.

RSA encryption being used in the generation of the certificate.

AES encryption being used in the generation of the certificate.

AES encryption being used in the generation of the certificate.

public IP addres of the Cisco IMC not being included in the SAN.

public IP addres of the Cisco IMC not being included in the SAN.

Suggested answer: A
asked 07/10/2024
Rajeev R Kumar
44 questions

Question 52

Report Export Collapse

Refer to the exhibit.

Cisco 300-615 image Question 52 113233 10072024010022000000

Cisco UCS Manager is being upgraded using the Auto Install feature, but the FSM fails. Which action resolves the issue?

Acknowledge the primary fabric interconnect.

Acknowledge the primary fabric interconnect.

Remove the service pack from the subordinate fabric interconnect.

Remove the service pack from the subordinate fabric interconnect.

Clear the startup version of the default infrastructure pack.

Clear the startup version of the default infrastructure pack.

Upgrade the firmware of the infrastructure firmware by using the force option.

Upgrade the firmware of the infrastructure firmware by using the force option.

Suggested answer: C
asked 07/10/2024
OZana Monce
35 questions

Question 53

Report Export Collapse

An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?

Restore UCSM configuration from backup.

Restore UCSM configuration from backup.

Roll back to the previous firmware.

Roll back to the previous firmware.

Use AutoInstall to reinstall the firmware.

Use AutoInstall to reinstall the firmware.

From the peer IOM, reset the faulty module.

From the peer IOM, reset the faulty module.

Suggested answer: C
asked 07/10/2024
Henry Pitcher
37 questions

Question 54

Report Export Collapse

Refer to an exhibit.

Cisco 300-615 image Question 54 113235 10072024010022000000

An engineer is troubleshooting an upgrade failure on a switch. Which action resolves the issue?

Save the system image in NVRAM.

Save the system image in NVRAM.

Use the same system image as the kickstart image.

Use the same system image as the kickstart image.

Load a new system image.

Load a new system image.

Reload the same system image.

Reload the same system image.

Suggested answer: C
asked 07/10/2024
carlos soto
42 questions

Question 55

Report Export Collapse

After upgrading a client’s fabric interconnect to the latest version, an engineer discovers that the appliance has lost its entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)

Equipment FSM page, InternalBackup stage

Equipment FSM page, InternalBackup stage

Service profiles page, InternalBackup stage

Service profiles page, InternalBackup stage

Admin page, PollInternalBackup stage

Admin page, PollInternalBackup stage

Equipment FSM page, PollInternalBackup stage

Equipment FSM page, PollInternalBackup stage

Admin page, InternalBackup stage.

Admin page, InternalBackup stage.

Suggested answer: A, D
asked 07/10/2024
Brian Foy
43 questions

Question 56

Report Export Collapse

Refer to the exhibit.

Cisco 300-615 image Question 56 113237 10072024010022000000

A PC belongs to VLAN 68 The user experiences a large amount of packet loss when communicating with hosts that are outside of VLAN 68. Which action resolves the problem?

Replace HSRP with GLBP

Replace HSRP with GLBP

Enable the peer-gateway feature

Enable the peer-gateway feature

Remove the HSRP configuration

Remove the HSRP configuration

Configure ip arp synchronization on both switches.

Configure ip arp synchronization on both switches.

Suggested answer: B
Explanation:

I assume that the PC is sending traffic with destination MAC of Nexus physical interfaces. If more snap shots about this question are available, please share.

asked 07/10/2024
Peter Lam
48 questions

Question 57

Report Export Collapse

Refer to the exhibit.

Cisco 300-615 image Question 57 113238 10072024010022000000

An upgrade operation fails with an error displayed. Which action resolve the issue?

Use a different system image

Use a different system image

Use a different kickstart image

Use a different kickstart image

Allocate extra space on a flash drive to extract a kickstart image

Allocate extra space on a flash drive to extract a kickstart image

Allocate extra space on a flash drive to extract a system image

Allocate extra space on a flash drive to extract a system image

Suggested answer: A
Explanation:

Kickstart image verification succeeded. System image has failed.

asked 07/10/2024
Mathieu Alingum Nubee
44 questions

Question 58

Report Export Collapse

An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?

Install Infrastructure Firmware, then Install Server Firmware.

Install Infrastructure Firmware, then Install Server Firmware.

Install infrastructure Firmware, then Install Hypervisor Firmware.

Install infrastructure Firmware, then Install Hypervisor Firmware.

Install Hypervisor Firmware, then Install Infrastructure Firmware

Install Hypervisor Firmware, then Install Infrastructure Firmware

Install Server Firmware, then Install Infrastructure Firmware

Install Server Firmware, then Install Infrastructure Firmware

Suggested answer: A
Explanation:

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Management_25/b_GUI_Firmware_Management_25_chapter_0111.pdf

Cisco 300-615 image Question 58 explanation 113239 10072024010022000000

asked 07/10/2024
Pradap Singh
38 questions

Question 59

Report Export Collapse

Refer to the exhibit.

Cisco 300-615 image Question 59 113240 10072024010022000000

The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration set must be added to the script to fix the issue?

A. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1

switch(config-apple)# action 0.2 cli enable

switch(config-apple)# action 0.5 cli switchto vdc Core

switch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1

switch(config-apple)# action 0.2 cli enable

switch(config-apple)# action 0.5 cli switchto vdc Core

switch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1

switch(config-apple)# action 0.2 cli enable

switch(config-apple)# action 0.5 cli switchto vdc Core

switch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1

switch(config-apple)# action 0.2 cli config t

switch(config-apple)# action 0.5 cli switchto vdc Core

switch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1

switch(config-apple)# action 0.2 cli config t

switch(config-apple)# action 0.5 cli switchto vdc Core

switch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1

switch(config-apple)# action 0.2 cli config t

switch(config-apple)# action 0.5 cli switchto vdc Core

switch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1

switch(config-apple)# action 0.2 cli config t

switch(config-apple)# action 0.5 cli switchto vdc Core

switch(config-apple)# action 0.8 cli switchto vdc Distribution

Suggested answer: B
Explanation:

Need exact snap shot to confirm the following.

The selection of is due to SNMP command has the key word “oid”.

The command “switchto vdc Core” show run in “enable” mode, not “config t” mode.

asked 07/10/2024
pheangphadhu pravitpinyo
47 questions

Question 60

Report Export Collapse

An engineer must place a Cisco UCS B-Series Server in a single server pool in Cisco UCS Manager. The engineer creates a qualification policy, but the server is still seen in multiple pools. Which two actions resolve the issue? (Choose two.)

Select the Server Pool Policy Qualification from the qualification drop-down menu in the Server Pool Policy

Select the Server Pool Policy Qualification from the qualification drop-down menu in the Server Pool Policy

Select the Server Pool Policy from the qualification drop-down menu in the Server Pool Policy Qualification

Select the Server Pool Policy from the qualification drop-down menu in the Server Pool Policy Qualification

Set the operating system qualifier inside the Server Pool Policy Qualification

Set the operating system qualifier inside the Server Pool Policy Qualification

Set the number of vNICs qualifier inside the Server Pool Policy.

Set the number of vNICs qualifier inside the Server Pool Policy.

Set the storage capacity qualifier inside the Server Poo. Policy Qualification.

Set the storage capacity qualifier inside the Server Poo. Policy Qualification.

Suggested answer: A, C
asked 07/10/2024
Piyush Zope
45 questions
Total 166 questions
Go to page: of 17
Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

DRAG DROP Drag each item listed on the left to its proper category on the right Not all items will fit the categories.
An engineer is implementing a new BGP peering in their new data center. The engineer set up the BGP session that peers with the remote end. As soon as the BGP peers attempt to exchange routing prefixes, one of the BGP peers drops the connection. After reviewing the configuration, the engineer reviews the logging messages. The engineer discovers that the router is missing keepalives from the remote end and terminates the session. Which action resolves the issue?
Refer to the exhibit. Refer to the exhibit. A functioning trunk port Ethernet1/48 exists between two identical Cisco Nexus 5000 Series Switches. The interfaces on the switches support the MACsec feature and are configured identically. To enable manual MACsec, an engineer adds the configuration shown in the exhibit to both sides of the trunk. The trunk port stops functioning. Which action should be taken to resolve the issue?
A network engineer is implementing the Cisco ACI Fabric and notices that the Leaf-1 switch is registered, has an assigned name, but is displayed as inactive in the APIC. After further investigation, it became clear that the leaf switch was recently moved from another Cisco ACI environment. Which action resolves the problem?
Refer to the exhibit. A client configures an upgrade of its Cisco Nexus switches that are connected to the Cisco ACI controller, such that the switches are upgraded one at a time. After the upgrade is run, it is discovered that both Cisco Nexus switches were upgraded simultaneously. Which two actions ensure that the switches upgrade one at a time? (Choose two.)
A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue? A. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels 2) Verify that at least two physical cables between the IOM and fabric interconnect function properly. 3) Check for runtime link down status 4) Reseat the affected IOM.
Refer to the exhibit. The FCoE traffic fails to traverse the vfc2 interface. The VSAN 102 is configured for vfc2. Which action resolves the issue?
Refer to the exhibit. Refer to the exhibit. The monitoring team reports an inability to access the devices after a new centralized management integration. Which action resolves the issue?
When the engineer runs the command, this error is received: opsengineer@wkst1:/home/auto/bash_scripts$ curl –s –b cookie_file_39422186.txt –X GET –k 192.15.132.101/api/node/class/Tenant.json {“totalCount”:”1”,”imdata”:[{“error”:{“attributes”:{“code”:”400”,”text”:”Request failed, (output omitted)”}}}]} Which action resolves the issue?
Refer to the exhibit. An administrator directly connects a Fibre Channel storage array to ports 1 through 4 on a Cisco UCS 6454 Fabric Interconnect. The administrator configures a service profile to boot directly from the new Fibre Channel storage array, but the service profile fails to boot. When the administrator checks the output of the show flogi database command on the fabric interconnect, it shows the output presented in the exhibit. Which action resolves the issue?